Jonathan Lee Recruitment Automotive Jobs: 11/12/2011

Friday, 16 December 2011

Electrical Engineer - Liverpool (PKT-104825)

Apply now

Electrical Engineer
Liverpool, Merseyside, England

APPH, part of the BBA Group, designs and manufactures hydraulic systems and landing gears for the worlds aircraft. From design through manufacture to supply, service and support, repair and overhaul, the APPH Groups products are at the forefront of the worlds aerospace market.

This role is based in Cheshire, close to the M6 and M56 and is commutable from Liverpool, Manchester, Chester, Crewe and Warrington.

As an Electrical engineer you will be required to perform various tasks that fall into three main categories: Conceptual and feasibility studies, detail design and manufacturing test equipment and procedures:

Conceptual design and feasibility
*Assessment of electrical technologies and incorporation into the clients products.
*Electrical actuation, instrumentation and sensors
*Understanding impact to product architecture
*Introduction of instrumentation and sensors onto client products.

Detailed design
*Creation of CAD drawings and/or Gerber files for electrical systems on new product developments
*Impact and requirements of aircraft systems to support electrical products
*Power loads, data signal interfaces and safety functions
*Specification of electrical equipment and test specifications for compliance with airworthiness requirements
*Evaluation of non-conformances to design acceptance criteria

Qualification and Manufacturing test equipment

Design documentation
You will have at least 5 years experience and/or 3 full product life-cycles in electrical engineering role (ideally in aerospace industry)
Degree or HNC in Electrical Engineering
Experience with:
.Electrical actuators , dc brushless motors, power circuits, electrical harnesses, NI equipment and LabView programming, DSP, PLC programming, FPGA programming and circuit design (desirable)
.CADSTAR or equivalent E-CAD package. PCB layout, schematic design and manufacturing data production.
Forward looking creative and innovative problem solver
Good analytical skills
Significant knowledge of technologies both inside and outside of primary field of operation
Good communicator and presentation skills
Good interpersonal and negotiation skills

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Battery Technology Engineer - - Coventry (RGR-104649)

Apply now

Battery Technology Engineer -
Coventry, West Midlands, England

Based on a very attractive University campus, this Centre of Excellence is building on its growing reputation for Electric Vehicle (EV) development. It has plans to expand it operation and increase the number of talented Engineers and Specialists it employs, working on new projects incorporating cutting edge technologies. This has created an opportunity for a Battery Technology Test Engineer to join the team. This role based in Coventry commutable from Birmingham, Warwick, Leicester, Gaydon, Milton Keynes, Leamington, Northampton.

A new battery development laboratory is being established at the Technical Centre. Part of the job will be to support bench work and conducting data analysis on the results of ageing, degradation, performance and thermal testing. Write reports detailing conclusions and recommendations. Another aspect of the role will be to assist in the development of a battery technology road map, contributing from a early stage offering the opportunity to influence the future direct of this technology. The job also offers the opportunity to work on collaborative projects with other enterprise, academic or research institutions, so any experience of making applications for grant aid from Government would be a particular advantage. This is a primarily Coventry based job with occasional overseas travel.

Candidates will need to have a first degree in Chemistry, Physics, Physical Sciences. A MSc or PhD would be preferred. One to 2 years industry experience would be ideal but recent graduates will also be considered. Must have some exposure to test or experimentation in Li-ion batteries or similar electro-chemical field with a good background in data analysis, development of theories and application of test data in new programmes.

Logistics Analysts - 3946 - Leicester - £20,520 - £23,650 (DRP-104615)

Apply now

Logistics Analysts - 3946
Leicester, Leicestershire, England
£20,520 - £23,650

We are recruiting for a Logistics Analyst on an 18-month fixed term contract based in Leicester.
As Logistics Analyst, you will to assist the Logistics team as we transition to SAP. The role will be a fixed term contract required until the transition is completed by October 2013.

Duties will include:
* Manage materials to defined flow paths
* Manage excess/aged inventory, maximize inventory turns and improve order-to-delivery results
* Monitor supplier performance, freight charges, inventory counts, inventory record accuracy - determine root cause and take corrective action
* Perform inventory reconciliations and resolve grief between UKHA and customers inventory systems
* Document and maintain standard work for transactional process
* Monitor metrics past dues, forecast accuracy, drop in orders, committed ship date - determine root cause and take corrective action
* Coordinate New Product Introductions
* Schedule interplant and supplier purchased parts and materials and resolve related grief
Applicants are required to have the following skills:
Essential:
* Prioritise own work in a dynamic environment
* Field issues and communicates response and actions to customers daily
* Experience in material planning, procurement, scheduling, inventory management and related supply chain activities
* Strong analytical and problem-solving skills, including manipulating data within Microsoft packages
* Excellent interpersonal, teamwork, organization and communication skills
* Ability to work in a team environment and must be able to communicate effectively at all levels
* Ability to use own initiative and recommend process improvements
* Must be customer focused and have ability to build relationship with both supplier and customer

Desirable:
Educated to Degree level in Business Management / Supply Chain / Manufacturing Logistics or equivalent

Service Account Manager - Basildon (BST-104836)

Apply now

Service Account Manager
Basildon, Essex, England

To undertake day to day management of a number of service and installation contracts within the petroleum retail industry. You will own a number of KPIs and be responsible for driving continuous improvements through a standard tool set and development of the relationships within the client account. You will drive contract profitability and will be incentivised to drive percentage improvements against a JOP. In addition to the account role, you will also be called on as Customer Service Centre support, during holiday and low cover periods at the discretion of the Customer Service Operations Manager. The purpose of this aspect of the role will be to support with engineers and field managers to achieve a minimum 92% SLA and sustain backlog below an agreed company target.
Principle contact for the client and associates relating to multiple service contracts in place
Ensure account backlog remains lower than 2 days call volume and that 20+ day backlog is lower than 35% of overall account backlog
Increase contract profitability through monthly steering meetings and data analysis
Development and presentation of account specific KPIs, followed up by relevant gap analysis, root cause counter measure and solution development
Monitor and analyze customer activity to identify new business
Update senior management with key issues, revenue potential and business expansion opportunities
Run regular performance reviews with clients and senior management
Manage small projects through to completion
Ensure excellent communication is maintained with the target account ensuring coherent strategy is presented from across the whole organization
Minimize need for customer escalations
Review closed contracts jobs for chargeable opportunities
Attendance at daily Gemba walk
Relationships

Customer Service Operations Manager
UK Service Director
Regional managers
Key Account Managers
Field Service Engineers
Customer contract managers

Measures of Performance

Delivery against profitability targets (Monthly DM % and core chargeable revenue)
Service contract KPI set
Minimum SLA targets to be achieved of 92% within regions
WIP progress jobs not to exceed 400 at any one time for the company

Background and Skill
Good A Levels or equivalent qualification.
Computer literate including knowledge of Microsoft Excel and Access and PowerPoint
Some knowledge of petrol forecourt, point of sale and tank gauge equipment would be desirable.
Excellent customer relations skills
Experience in an operational environment dealing with field engineers
Well structured and strategic approach with excellent organisational and time management skills

Geometry & Validation Engineer - Derbyshire - Attractive salary (STR-104832)

Apply now

Geometry & Validation Engineer
Derbyshire, England
Attractive salary

An opportunity has arisen for a Validation Engineer with a leading injection moulding firm supplying the automotive OEM companies with exterior trim. They are part of a large global group.
As Validation Engineer you will manage the design, development, manufacturing and tuning of the control fixtures and deliver dimensional reports from measurements.

The main activities of the Validation Engineer are as follows:
You will estimate the budget (hours + costs) needed to make control fixtures and measurements. You will participate to the realization of the Geometry Folder and write the specifications of the control fixtures. You will participate with the Purchasing Department to the sourcing of control fixture and will manage the technical progress of the manufacturing of the control fixtures (modular, production, ). You will validate the functionality of the checking fixture before transferring it from the supplier. You will manage the modifications and tuning of the control fixtures with the suppliers. You will plan, organize, make or sub-contract all the dimensional measurements according to the metrology requests. You will manage the measurement flow and the storage of parts and test equipment within the metrology department.
You will have experience of working within the automotive industry in a similar role.

Senior Electrical / Electronic Engineer - Leicestershire - £25k - 40k per year + 25K to 40K + Pension + PHC (GCK-104275)

Apply now

Senior Electrical / Electronic Engineer
Leicestershire, England
£25k - 40k per year + 25K to 40K + Pension + PHC

Our client is a leading clean power systems company. Their proprietary clean fuel and clean power technologies provide solutions to the difficult environmental and energy supply challenges being faced by governments and industry.

Due to growth plans a position of Senior Electrical / Electronic Engineer has become available, and as such we welcome applicants who want a fresh challenge, and meet the requirements below: To recruit, retain and develop a team of electrical and electronic engineers, working across all areas of the company, who apply electrical and electronic engineering design and prototype build skills in the development of fuel cell stacks, systems and associated test systems.

To identify the future term needs in respect of electrical and electronic systems and ensure that we have access to the people, external consultants, suppliers and manufacturing partners needed to deliver it.

Identifying requirements for electrical and electronic systems in fuel cell systems in both the production and development stages
Working with Operations, Sales and others to establish effective volume production solutions for production systems
Maintain an effective rapid-prototyping capability in the team for the electrical and electronic systems
Identifying the resources (skills, people, suppliers, equipment etc) required to deliver these
Defining the engineering processes for EandE system design, build, test and release within the Quality Mgt System

Experience
Degree level qualification in Electrical/Electronic Engineering, and extensive experience including personnel management.
Managerial and technical experience essential

Principal Analysis Engineer - Northampton (GCK-104265)

Apply now

Principal Analysis Engineer
Northampton, Northamptonshire, England

This company leads the world in integrated engine and powertrain solutions from clean sheet design concept through castings, manufacture and vehicle installation to calibration, onboard diagnostics and telemetry.

Due to growth plans a position of Principal Analysis Engineer has become available, and as such we welcome applicants who want a fresh challenge, and meet the requirements below The purpose of the job is to provide structural analysis support to engineering programmes and to help support the FEA team. You should have the ability to perform structural analysis of engine systems and components to support project and customer requirements.
You will carry out analysis using hand calculation, spreadsheets, Finite Element or Multi-Body Dynamic techniques and liaise with customers, project teams and sub-contractors and represent the Analysis Department at Project meetings when required.
You will also present results and recommendations of the analysis to the customer.
Desirable assets for this positon are working knowledge of a CAD system, preferably Pro/Engineer or IDEAS Master Series, basic programming and operating system skills, e.g Visual Basic, Fortran, Pascal, Windows, Unix, Linux, report writing and time management skills and German Language skills.
Additionally you will have the ability to work on your own and as part of a team, confidence to communicate at all levels and be self motivated and possess the drive to complete tasks in a timely manner.
You will have the ability to work well under pressure and to strict time constraints and have the flexibility and willingness to travel to customer sites.

Thursday, 15 December 2011

Transmissions Design Chief Engineer - Nottingham (RGR-104597)

Apply now

Transmissions Design Chief Engineer
Nottingham or Warwick

A world class Powertrain Development Centre has been established and continues to be developed in a very attractive location in the East Midlands. Dedicated to powertrain design and development for the next generation of vehicles, the UK RandD centre is a vital part of the Company`s future strategy to become the world`s leading automotive company. This role can be based at either Nottingham or Warwick. Commutable from Birmingham, Coventry, Leamington, Milton Keynes, Oxford,

A recent promotion has resulted in an opportunity for an ambitious Transmission Design Principal Engineer to take the next step up in his / her career. This job will also appeal to a current Chief Engineer seeking a new challenge. The main activities of the job will be:

Lead and manage the design team
Manage and review general transmission layout design and DMU testing
Design and analysis of components
Conduct evaluation on existing designs
Provide technical support and advice on Transmission design projects
Supplier management and assessment
Lead DFMEA
Apply new Transmission and component technologies, techniques and advanced materials
Provide in-house training and mentoring to less experienced engineers
Responsible for team building and career development
Recruitment and appraising of staff
Problem resolution of 4WD, AT Hydraulic systems and AT control strategy development and calibration related issues
Candidate core requirements:
Degree or similar qualification and a minimum of 10 years Transmission design experience
Team leadership experience, good communicator and excellent interpersonal skills
Detailed knowledge of Transmission design, development, validation and test processes.
Ability to motivate, influence and lead teams of engineers
Experience of Transmission specific design / analysis software packages

Electric Vehicles Senior Systems Integration Engineer - Coventry - £40k - 50k per year + Excellent salary and benefits (RGR-104629)

Apply now

Electric Vehicles Senior Systems Integration Engineer
Coventry, West Midlands, England
£40k - 50k per year + Excellent salary and benefits

Derivation of vehicle system diagnostics strategies to implement the requirements from the system safety case as well as requirements from service and manufacturing.
Validation of vehicle and systems diagnostic functions.
Perform in-vehicle testing with respect to fault insertion and practical pin FMEA.
Interface with manufacturing for electrical build support issues. HV, LV and CAN.
Based in Coventry there will also be the opportunity to travel overseas to the parent company location on an occasional basis not exceeding 10% of working time.
Candidate requirements.
Degree or similar qualification and a minimum of 5 years Automotive industry experience.
Have an understanding and appreciation of vehicle networking, particularly CAN. Including CANAlyzer, CANoe, INCA and other standard tools.
Extensive experience of the development and validation of automotive ECU`s, Hybrid or EV experience would be an advantage.
Knowledge and experience in developing electric motors and their controllers.
Able to generate, manage and execute component delivery plans and be responsible for all aspects of documentation delivery.

Powertrain Diagnostics Engineer - Nottingham - £35k - 40k per year + Competitive market salary, pension, private health cover, income protection (RGR-104389)

Apply now

Powertrain Diagnostics Engineer
Nottingham, Highland, Scotland
£35k - 40k per year + Competitive market salary, pension, private health cover, income protection

Be the technical lead for Diagnostic systems on specific projects.
Define technical requirements for Diagnostics systems on supported projects.
Play a key role in the development of company Powertrain Diagnostics strategy.
This is a UK based role with occasional overseas travel to vehicle manufacturing sites and suppliers.
Candidate qualifications and experience:
Degree or similar qualification.
Minimum of 4 years Automotive industry experience.
Strong numeracy and literacy skills.
Able to demonstrate a depth of knowledge in automotive diagnostics.
Ideally working towards Chartered Engineer status.
Delivery focused with the drive to strive for improvements and high customer service.
Evidence of achieving results through effective time management.
Able to overcome cultural barriers.

Mechanical Package Principal Engineer - West Midlands (RGR-103729)

Apply now

Mechanical Package Principal Engineer
West Midlands, England

Based on a very attractive University campus, this Centre of Excellence is building on its growing reputation for vehicle and powertrain development. It has plans to expand its operation and increase the number of talented Engineers and Specialists it employs, working on new projects incorporating cutting edge technologies. This growth has created an opportunity for a Mechanical Package specialist to join the Vehicle Package and Concepts team. This role is based in Coventry and there may be some occasional overseas travel required. Location commutable from Birmingham, Warwick, Leicester, Gaydon, Milton Keynes, Northampton, may also interest candidates in the Crewe area.
This is a Principal Engineer graded management role, the main activities and tasks will include:

Identification of under-bonnet and under-body mechanical package issues through physical vehicle and DMU review
Development of initial proposals for part design changes, clipping enhancements, protection requirements to resolve issues identified
Co-ordination and leadership of cross-functional teams to confirm optimal solutions for issues
Production of CAD layouts showing proposed changes and successful integration into vehicle DMU
Support the build of physical demonstrator vehicle based on existing cars to demonstrate proposed changes
Specification and initiation of appropriate test and verification methods to achieve robust engineering sign off of changes
Tracking of issues from identification through to implementation of solution and engineering sign off
Reporting of issues status as required, including management reviews
Candidate requirements and essential experience:
Degree, HND or HNC qualified with a minimum of 5 years experience of under-bonnet package design
A good awareness of key design factors in the development of robust flexible component routings
Have an understanding of the development and usage of dynamic engine roll models
A firm understanding of mechanical package integrity assurance; modelling, test, engineering sign off and product launch
A firm understanding of design for serviceability and manufacture
Proficiency in the use of Catia V5 or Pro-E
working in and leading cross functional teams
Good communication and interpersonal skills
Proficiency in Vismockup or similar DMU package
Proficiency in MS Word, Excel and Powerpoint
Experience in the use of Teamcentre would be useful

NVH Principal Engineer - Coventry (RGR-100918)

Apply now

NVH Principal Engineer
Coventry, West Midlands, England

Our client is a Centre of Excellence in the development of Electric Vehicles (EV) and Hybrid Powertrains, it also offers consultancy services in whole vehicle development. Based in Coventry on a very pleasant university campus, it now has an opportunity for a talented Principal Engineer to lead Vehicle and Powertrain NVH test and analysis projects.

This role is based in Coventry and will also require travel to India, frequency to be discussed at interview.

Responsibilities;

Act as an NVH advisor and consultant on several concurrent automotive engineering projects
Support and/or conduct data acquisition and drive appraisal activities
Provide NVH support to the design engineering teams in the UK and India
Develop design guidelines, processes and procedures
Provide NVH status to Project Reviews
Develop refinement improvement strategies (Vehicle and/or Driveline)
Candidate profile;
Mechanical/acoustics engineering degree (BEng/MEng/BSc/MSc/Phd)
Minimum of 5 years experience of Vehicle/Powertrain NVH test and analysis for an automotive OEM or consulting house
Experienced in use of NVH test instrumentation and methodologies (Powertrain /mounting systems/driveline refinement/TPA/sound quality engineering, signal processing, data analysis and presentation)
Experienced in using one or more of the following software acquisition and
analysis tools:- MATLAB / LMS CADA-X / LMS Test.Lab / HEAD Artemis
Project engineering skills (timing plans, work instructions, costing, reporting, data presentation, health and safety)

Craftsmanship - Principal Resident Engineer India - Pune (RGR-102495)

Apply now

Craftsmanship - Principal Resident Engineer India
India / UK

One of the world`s leading commercial vehicle manufacturers established for more than 60 years. Its product line-up has more recently moved into the design and manufacture of passenger cars, including electric vehicles. Able to offer excellent career development opportunities and for this role, the chance to live expense free in India.
As Principal Resident Engineer you will support various builds across a range of vehicle projects acting as the focal point for the communication and resolution of Craftsmanship issues prior to SOP. It is envisaged that work arrangements will be a rotation of 6 weeks in India, 2 weeks in the UK.

You will carry out verification builds using Master Body and eCube, working with relevant body in white, interior and exterior engineers to resolve craftsmanship issues as well as support project reviews.

Applicants must show evidence of achieving results through effective leadership of a team, able to translate business plans into individual objectives for staff and capable of managing a group of engineers and supports the Executive Engineers in the delivery of the performance objectives for their groups.
Applicants must be degree qualified or hold a similar qualification plus:

Strong numeracy and literacy
Automotive Craftsmanship experience is essential
Capable of leading a project elements with support from more senior staff when necessary.
Effective team member contributing to improvements and high customer service.
Will already be chartered or working towards chartered status

Powertrain Thermal Systems Integration Principal Engineer - Coventry (RGR-102304)

Apply now

Powertrain Thermal Systems Integration Principal Engineer
Coventry, West Midlands, England

Based on a very attractive university campus, this centre of excellence for the development of electric vehicles offers tremendous opportunities for career development. This is a great opportunity to gain experience working in a multi-cultural environment in the UK and other locations world wide on a regular basis. This role will appeal to candidates located in Coventry, Leamington, Crewe, London, Birmingham, Warwick, Milton Keynes.
As an Integration Engineer you will be working on vehicle programmes in the area of Powertrain Thermal systems development (cooling, intake and exhaust). The job includes the following responsibilities:

Support the programme design team in the system specification definition for the powertrain thermal systems
Supervise cooling system flow and thermal analysis using appropriate CAE tools such as KULI or Radtherm in order to aid in the design of the cooling systems and heat management components
Develop and manage vehicle targets, DVP and programme status documents
Conduct testing in environmental test facilities and on development hot climate trips; this will include management of vehicle instrumentation and data acquisition as well as processing, analysing and reporting of test data.
Candidates will need to be Degree, HND or HNC qualified, able to demonstrate strong numeracy and literacy skills and have at least 5 years experience in Powertrain Thermal systems development.

This is a Management graded role therefore candidates must be able to lead and inspire a team to deliver high levels of customer service.

Events Communication Officer - Castle Bromwich - £16.60 - 16.60 per hour (GWOC-104826)

Apply now

Events Communication Officer
Castle Bromwich, West Midlands, England
£16.60 - 16.60 per hour

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

A new 12 month contract opportunity has arisen for an Events Communication Officer.

The individual will be responsible for the following:

- HR bulletins
- On-site photography and video
- Writing People Talk
- Identifying and writing Team Talk stories
- Site look and feel (posters, notice boards etc)
- Arrange face-to-face communications events including Team Talk monthly
- Implement and manage roadshows, milestone events and family fun days
- Support HR reward and recognition programmes
- Arrange and look after media visits, third party and VIP visits
- Support Plant PR Manager

Role Requirements:

- Experience of writing and events experience
- Experience of writing and editing stories for internal distribution via email and intranet.
- Experience of managing content on Intranet.
- Event creation and management skills

General Buyer - Gaydon - £15.80 - 15.80 per hour (GWOC-104824)

Apply now

General Buyer
Gaydon, Warwickshire, England
£15.80 - 15.80 per hour

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

They are currently seeking to recruit 2 General Buyers, starting in January 2012.

The individuals will provide a project support role to scope out and implement the operational and contractual changes required to purchasing documentation (e.g. contracts, purchase orders) and processes for proposed changes to migrate the legal entities

The first role will be consist of a maximum of 4 weeks scoping and assisting on the implementation for a further 12 weeks (total 16 weeks).

The second role will be for 12 weeks, assisting with the implementation period.

Role Requirements:

- Understanding of potential different types of purchasing contracts and orders across a diverse company
- Good interpersonal skills to interview key purchasing staff to understand work to be done and to work with same colleagues in implementation tasks
- Familiarity with contract / purchase order documents and on how the order-placing / contract cycle works
- Ideally worked in a large purchasing / procurement / contracts department for minimum 2 years
- Educated to at least A level.

Time Study Engineer/Industrial Engineer - West Midlands - £25k - 35k per year + Good permanent salary (GSI-104763)

Apply now

Time Study Engineer/Industrial Engineer
West Midlands, England
£25k - 35k per year + Good permanent salary

A global supplier of new and retreaded tyres for the aerospace market.
The firm are looking for an experienced Industrial Engineer with a background in work measurement exercises. You`ll be responsible for carrying out time studies and gathering shift data to generate process improvements in output and production.

The data is to be fed back with the use of presentations and flow charts and to work with management to produce initiatives that increase output and capacity.

The role is encompassing as you`ll be working to reduce scrap and waste to present a cost saving and implementing all your recommendations.

You must be an organised person with demonstrable experience of performing this role in a similar capacity. A background in automotive or aerospace engineering would be perfect.

This position is a permanent position based on a day pattern of hours. A good market salary and the chance to working independently.

IT Communications Lead - Gaydon - £20.40 - 20.40 per hour (GWOC-104818)

Apply now

IT Communications Lead
Gaydon, Warwickshire, England
£20.40 - 20.40 per hour

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

They are currently seeking to recruit an IT Communications Lead on a 12 month contract basis.

The individual will be responsible for the following:

- Creating and implementing new processes for new channels
- Inputting to status report
- Producing communication plans for projects that are appropriate to the audience and will achieve the desired outcome
- Reviewing and approving newsletter and team
- Organisation of events including town hall Approve / reject change management requests (ascertain whether communication is required before the change is approved)
Be able to produce written communication appropriate to the channel using the brief from project team or following a meeting with the project team

Role Requirements:

- 3+ years experience in an Internal Communications role, ideally a qualification in PR / Communications.

Logistics Planner - Oxford - £0 per hour + Competitive market rate (KYU-104786)

Apply now

Logistics Planner
Oxford, Oxfordshire, England
£0 per hour + Competitive market rate

Logistics Planner has overall responsibility for the supply chain from supplier to fit point. The Logistics Planner has responsibility for the detailed planning in terms of delivery concept and then through liaising with other key process partners (e.g. container planner / assembly logistics planner) ensures that the total supply chain is consistent, viable, cost effective and efficient.
Responsibility

* Supply Concept
*Identifying and removing waste/handling steps from supply chain
*Providing logistic costs
*Implement reference models
*Create supply strategies
*Team Development
*Developing cost effective supply chains

Instruments Engineer / Electrical Engineer - Sheffield - £25k - 30k per year + Overtime (JDW-102934)

Apply now

Instruments Engineer / Electrical Engineer
Sheffield, South Yorkshire, England
£25k - 30k per year + Overtime

My client a leading manufacturing company based in Sheffield. The company supplies precision components and assemblies to the aerospace, power generation, speciality automotive and oil and gas industries

Main Responsibities

My client require an experienced Electrical Engineer / Instruments Engineer due to continued growth of the company.
Candidates should have experience of working in a hot metal manufacturing environment with experience of furnaces.
Will be responsible for determining the nature of any faults, and dealing with breakdowns and problems.
Responsible for instrument calibration and repair
Will be involved in project work for any new equipment

Experience required

Candidates should have experience of working with gas fired furnaces
Previous experience of working in a manufacturing environments with NADCAP specifications
Should have an extensive knowledge of furnaces and hot metal forming

System Integration Engineer - eKERS (NL01E1) - Northampton (KH-102184)

Apply now

System Integration Engineer - eKERS (NL01E1)
Northampton, Northamptonshire, England

Our Client designs, develops, and manufactures powertrain components for use within the motorsport industry. They are currently seeking a contract or permanent System Integration Engineer

Reporting to the Team Leader, the Engineer will work on engine control integration and be responsible for the validation and test of control systems comprising uP, transducers, control algorithms, software. You will devise tests and problem solve issues with system functionality in a real time environment.

Key Responsibilities:

* Application of high performance hybrid systems, actuators and sensors (E-Motor, Power electronics, batteries)
* Electrical integration of F1 hybrid control systems into an F1 race car
* Key role in the design, development, validation and application of hybrid control units, power electronics, motors, battery disconnect systems, batteries, BMS systems, GFI systems, sensors and actuators
* Specify validation tests
* Provide rapid root cause failure analysis and solutions to the business
* Document specifications and procedures as required

Essential Requirements:

* Degree level or higher qualified in Engineering
* 3 years experience in automotive development environment
* System and component testing, fault finding and troubleshooting
* Experience of high voltage (1kv) and high power systems

Desirable Attributes:

* Awareness of automotive hardware and software design and validation processes
* Automotive sensors and actuators component development

Personal Competencies

* Pragmatic
* Excellent communication skills
* Good initiative
* Good Team Player
* Independence

Control Systems Engineer - Transmissions - Berkshire (PBA-100242)

Apply now

Control Systems Engineer - Transmissions
Berkshire, England

Xtrac Ltd is a world leading supplier of high performance transmissions, they require a Control Systems Engineer for their advanced engineering group. This is an excellent opportunity to join a company that for over two decades has ensured that customers from all sectors meet, or even exceed, their targets by drawing on their unique blend of design, engineering and manufacturing capabilities. Specialising in Transmission Technology, supplying the Aerospace, Automotive, Defence, Marine and Motor Sports Sectors. The successful candidate will be responsible for the specification, installation, commissioning, calibration and support of transmission control systems in conventionally powered, hybrid and electric road and race vehicles.
The Control Systems Engineer will be required to provide day to day support for control systems and electronics for the engineering group.

To prepare project specifications, budgets and timescales to the Head of RandD.

To undertake research, tests, evaluations, and calibration to control systems and test instrumentation.

To create test procedures, analyse, calculate and interpret data and produce written reports for internal and external customers.

To work within the RandD team and advise project teams on requirements whilst providing technical support to multiple programmes.

To use control based languages and routines relevant for the operation and analysis of transmission systems.

Establish, maintain and manage a strong working relationship with new and existing customers and suppliers, at all levels.

To be part of the personal development process and attend reviews as required.
A degree in electrical, electronic, mechanical / mechatronics engineering, computing or applied physics (engineering subjects preferred). A higher degree is preferred. Working towards chartered status with a recognised institute.

Special Requirements of the role:

A knowledge of Automotive and Motorsport control and data acquisition systems such as Atlas, PI Toolbox and Motec.

A knowledge of analysis and simulation tools such as Matlab and Simulink.

Buyer - Leeds - £23k - 25k per year + Around �25,000 + benefits (IHU-103761)

Apply now

Buyer
Leeds, West Yorkshire, England
£23k - 25k per year + Around ?25,000 + benefits

Based in Yorkshire, our client is a long-established award winning designer and manufacturer of large AC induction motors. Their products are intended for the most arduous and demanding applications in the world. Offering quality and reliability that are considered second to none, the business is a preferred supplier to many international companies.
We are recruiting for a BUYER to work with the Purchasing Manager in a busy engineering environment. Having the ability to read engineering drawings and possessing some commercial experience, you will be buying engineering parts and other associated products. In addition, you should be IT literate and be able to produce weekly management reports using the ERP system. CIPS qualifications would also be advantageous. This position is commutable from Leeds, Bradford, Wakefield, Huddersfield and the surrounding areas.

Design Programmer Manager - 21083 - 24.60/hr Ltd Co. rate - Warwickshire (KH-104477)

Apply now

Design Programmer Manager - 21083 - 24.60/hr Ltd Co. rate
Warwickshire, England

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

We are recruiting for a Design Programmer Manager based in Warwickshire on a 6-month contract.
As Design Programmer Manager, you must have the following skills:
*Attribute management and cascade PALS target setting
* Benchmarking coordination
* Develop and realign programme activities within cycle prinicples
* Resource managament
* Timing development/management
* PC Skills including MS Project/Excel?PowerPoint/Word Presentation skills for all levels"
Applicants must be educated to a minimum of degree level.

Design Programme Manager - 20655 - 24.60/hr Ltd Co rate - Warwickshire (KH-101594)

Apply now

Design Programme Manager - 20655 - 24.60/hr Ltd Co rate
Warwickshire, England

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands. We are seeking to appoint a Design Programme Manager on a 9-month contract based in Warwickshire.
Design Programme Manager - Advanced Design required

Skills required:
*Attribute management and cascade
* PALS target setting/benchmarking co-ordination
*Develop and realign programme activities within cycle plan principles
*PC skills including MS *Project/Excel/PowerPoint/Word/Presentation skills
Project management skills required
Educated to a minimum of degree level

Data Modeller - 20544 - Warwickshire (KH-101395)

Apply now

Data Modeller - 20544
Warwickshire, England

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

A new contract opportunity has arisen for a Data Modeller in the Warwickshire area
The individual will use Catia V5 and Teamcenter and ideally have a vehicle engineering background in NC Programming as well as a knowledge of other CAD systems such as ALIAS and ICEM Surf.
The individual will require a broad knowledge of model manufacture and finish, including model making knowledge and composite tool design.

Experience with leading projects and liaising with various areas of model making specialism, e.g. Composites, Machining, Model Making and Rapid Prototype Tooling.

Previous experience of working on show cars and other design properties

Manufacturing Engineer - Worcester (STR-104122)

Apply now

Manufacturing Engineer
Worcester, Worcestershire, England

An opportunity has arisen for a Quality / Manufacturing Engineer within an automotive business involved in the manufacture of aluminium based components and assemblies with sustainable plans for growth. Well supported with investment both in equipment and people.
From a quality perspective you will: demonstrate the use of Quality planning (APQP) and deliver timing plans to support projects and programs, facilitate the resolution of client concerns with internally manufactured and supplied product by means of appropriate quality problem solving tools, support the achievement of the Company Quality KPI s (eg; Customer PPM, Internal Scrap and Cost of Poor Quality). You will also be resposnible for defining and deploying agreed quality standards within the organisation and down through to supply chain.

From a Manufacturing Engineering perspective you will plan and implement prototype and pre production builds following a recognised process (APQP) enabling tools, fixtures and processes to be deployed, compile required PPAP/ PSW submission data, initiate and be part of continuous improvement ideas and methods. You will also be required to work with others to solve day to day business problems utilising 8D problem solving principles and promote lean manufacturing.
You will ideally have an Engineering qualification (BTEC, ONC, HNC etc) and working knowledge of TS 16949 and ISO1400. Any experience of QA and Environmental management at a senior level would be advantageous.

Creative Designer - 21003 - 26.08/hr Ltd Co. rate - Warwickshire (KH-104474)

Apply now

Creative Designer - 21003 - 26.08/hr Ltd Co. rate
Warwickshire, England

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

We are recruiting for a Creative Designer on a 6-month contract based in Warwickshire.
As Creative Designer, you have good 3D spatial evaluation experience and good aesthetic judgement. In addition, you need good colour vision/ expertise in developing innovative materials.

Skills Preferred:
Programme delivery Strategic and planning skills Alias 3D understanding
Applicants are required to have experience in a Automotive Design studio and preferably have worldwide design experience.

You must be have a Design Degree.

Creative Designer - 20999 - 24.08/hr Ltd Co rate - Warwickshire (KH-104475)

Apply now

Creative Designer - 20999 - 24.08/hr Ltd Co rate
Warwickshire, England

Chassis NVH Engineer - Gaydon - £27.60 - 27.60 per hour (JAS-103606)

Apply now

Chassis NVH Engineer
Gaydon, Warwickshire, England
£27.60 - 27.60 per hour

An Engineer Specialist is required to work on contract for our large automotive client based in Warwickshire.

Description
Position Description:
Brakes NVH Programme Attribute Team (PAT) Leader. Reporting to: Group Leader Brake Refinement Applications Support and/or Key Interfaces: Brakes Performance PAT Leader (development partner) & Technical Specialists: Brakes NVH, Foundation Brakes, Brake Attributes.

Job Requirements
Skills Required:
Knowledge of dynamic signal processing using software such as LMS Testlab, Artemis, Matlab or similar. - Competent in analysing dynamic mechanical systems and noise and vibration data - Evidence of team leadership, communication and interpersonal skills. - Comprehensive ability to work with office IT applications and manage large numbers of records in different formats.

Skills Preferred:
Knowledge of product development processes (e.g. GPDS) is a significant advantage. Knowledge of WERS, eFDVS and Quality Tools (e.g. FMEA) is desirable. Experience in Chassis or Brakes technologies is an advantage.

Details
Experience Required:
Development of NVH performance of systems in an automotive environment.

Experience Preferred:
Component or system design using 6-sigma tools. Knowledge of Finite Element structural analysis techniques for NVH problem solving.

Education Required:
Higher education qualifications in NVH or Mechanical Engineering with an NVH specialism.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Wednesday, 14 December 2011

NDT Engineer - Sheffield - £25k per year (JDW-104788)

Apply now

NDT Engineer
Sheffield, South Yorkshire, England
£25k per year

My client a leading manufacturing company based in Sheffield. The company supplies precision components and assemblies to the aerospace, power generation, speciality automotive and oil and gas industries

Main Function of Job:
-Candidates should have previous NDT experience and current certifications, ideally from a heavy engineering background

Generation of Inspection certification
Advising Sales on acceptability / suitably of proposed customer specifications
-Hands-on Ultrasonic testing, die-penetrant inspection and magnetic particle inspection, ideally qualificed to level 2 in all disciplines
Hands-on visual inspection
Hands-on dimensional inspection
Marking of products prior to despatch
Positive Material Identification

Qualifications and Experience Required;
Essential:
Level 2 Magnetic Particle Qualification
Level 2 Ultrasonic Qualification
Level 2 Die-Penetrant Inspection Qualification - certifications should be current

Working knowledge of technical documentation
Good IT Skills, including mircosoft office software
Desirable:
Excellent organisational skills
Excellent communication and liaison skills

Mechanical Design Engineer - Dundee (RGR-104775)

Apply now

Mechanical Design Engineer
Dundee, Dundee City, Scotland

Europe`s largest independent supplier of lithium-ion battery systems, delivering individual solutions for electric and hybrid vehicles. Demand from UK and Mainland European car manufacturers continues to grow and this has created an opportunity for an experienced and talented Design Engineer to join the team based in Dundee.

This role will appeal to a creative and inventive Design Engineer who is looking for a technical challenge. Working with Electronics, Electrical and Systems Engineers, the task will be to design complex battery and associated control systems, packaging them in a variety of vehicles ranging from passenger cars to high performance sports cars. Each design is bespoke, bringing with it different challenges and you may find yourself working on several projects at differing stages of development.

Candidates will need to be able to demonstrate an excellent background in electrical module design and have good knowledge of sheet metal and plastic injection mouldings design and have experience in new product development. This may have been gained the Automotive, Aerospace, Defence, Subsea or general electronics industries utilising ProEngineer CAD, with experience of Windchill PDMLink 9.1 being an advantage. It would also be useful for candidates to have Finite Element Analysis skills with an understanding of structural analysis. A Degree or similar qualification would be useful but relevant experience is most important.

Lead Systems Engineer Hybrid & Electric Vehicles - Coventry (RGR-104726)

Apply now

Lead Systems Engineer Hybrid & Electric Vehicles
Coventry, West Midlands, England

Here is a great chance for an ambitious Systems Engineer to join Europe s largest independent supplier of lithium-ion battery systems. The development of Electric and Hybrid Vehicles has created a tremendous demand for its products and expertise from UK and mainland Europe Car manufacturers. Based in Coventry, commutable from Birmingham, Leicester, Milton Keynes, Leamington Spa.

This role will appeal to an Engineer who is hands-on, practical and with a proven background within Systems Engineering with experience in requirements capture in the delivery of hybrid vehicle systems or electromagnetic products for automotive customers. The main tasks will include the delivery of lithium-ion battery technologies into electric and hybrid vehicles for OEMs.

The role has responsibility for the commissioning of complex electrical systems. Developing commissioning test documents and ensuring vehicles and rigs are delivered according to project timing. Support with fault finding electrical issues on fleet vehicles. Liaising with OEM customer Hybrid Controls Team to determine systems requirements. Producing systems architecture and functional specifications. Identifying performance targets. Liaising with OEM Electrical Distribution Systems Team in developing harness requirements. Liaising with OEM Hybrid Controls Team to determine controls interfaces and developing signal database files to support. Some travel in the UK and Mainland Europe will be necessary.

In terms of the person specification, personality attributes are very important. Clear thinking, inclusive and cohesive work style. Creative problem solver, customer focused and forward thinking. Technically, must have knowledge of engineering tools and systems engineering methodology. Capable of reading and administering CAN database files (Vector DBC format). Degree qualified with experience in vehicle integration with a knowledge of diagnostics standards and Software Down Load concept. Experience in developing electrical test plans to support commissioning of prototype vehicles and rigs, experience in fault finding electrical issues in an automotive environment.

Design Engineer - Hinckley - £28k - 40k per year + Benefits (PBU-103166)

Apply now

Design Engineer
Hinckley, Leicestershire, England
£28k - 40k per year + Benefits

Due to impressive growth plans, our client is seeking to appoint a number of Design Engineers to strengthen the engineering team and to help drive and support the development of current and future product ranges In this role you`ll be given Design projects in a true cradle to grave environment, given total ownership of the project life cycle, whether this is a large project, or centred on individual components

Utilizing your existing skills, you will also be trained from day one in company standards and procedures to ensure you are able to make an outstanding contribution as part of a flexible work force, which thrives on producing a world class product.

Knowledge of Pro Engineer / Wildfire would be good but not essential due to in-house training facilcities (knowledge of other 3D CAD systems is equally useful)

Educated to at least a 2:2 degree in Mechanical / Automotive Engineering.
Proven track record as a Design or Project Engineer
Flexibility to travel to Europe and occasional worldwide locations
Driven to succeed

Engineering Manager - Halifax - £40k - 50k per year + Benefits (PBU-104666)

Apply now

Engineering Manager
Halifax, West Yorkshire, England
£40k - 50k per year + Benefits

Our client is a leader in design, manufacture and support of world leading turbo chargers and associated equipment.

Due to growth plans a position of Engineering Manager has become available, and as such we welcome applicants who want a fresh challenge, and meet the requirements below:

As an Engineering Manager, you ll be a key member of a dedicated unit engaged in the technical leadership of a range of new product introduction projects

Ensuring the product complies with the technical specification and is capable of being manufactured.
Managing the technical interface with the customer.
Coaching and supporting a team of engineers in delivering the technical objectives.
Accountability for all technical deliverables of platform engineering and new product introduction.
Project technical risk management.
Understanding the cost impact of engineering change to the product.
Leading the team through the FMEA process.
Working with the Technical Project Leaders, and feeding back updates to the teams.A practical appreciation of air handling requirements of diesel or gas engines
A proven track record in a design or project management capacity, specifically in relation to the release of new products
A background in engineering design, service delivery or a specialist problem solving role, with a focus on providing diesel engine solutions for cars/trucks
Significant staff management experience including training and development of staff.

Process Engineer - Corby - £20k - 40k per year + 20K to 40K (PBU-104575)

Apply now

Process Engineer
Corby, Northamptonshire, England
£20k - 40k per year + 20K to 40K

Our client is a leading tier 1 supplier of chassis systems to the Automotive OEM`s

Due to a solid order book, they are looking to add to their head count an experienced Process Engineer, therefore if you feel you meet the requirements below, please call or email registering your interest. As ane experienced Process Engineer you will be required to play a first line active role in the process optimisation of existing production lines.
Further, be involved in the planning and launch of robot equipped production lines for major projects and bringing those into full volume manufacture.
The role has total project responsibility with regards to sub-component optimisation and planning costs; will be required to play an active role in the process optimisation of existing production lines.

A hands-on-approach is required with considerable time spent on the shop floor working closely with Production Management and Personnel

Previous experience in engineering in a manufacturing environment
Minimum of HNC or above in an engineering discipline
Welding appreciation and experience
Robots appreciation and experience
Exposure to internal and external Customers
IT literate, able to generate and analyse data
Ability to read engineering drawings
Self-motivated, strong, confident communicator
Theory and Practical knowledge of Lean Manufacturing Six-Sigma techniques, Commercial capability and Product quality awareness

SQA Engineer - Warwick - £30k - 40k per year + Benefits (PBU-104545)

Apply now

SQA Engineer
Warwick, Warwickshire, England
£30k - 40k per year + Benefits

Our client is a leading technical supplier to the automotive industry, and due to exceptional growth plans and current business requirements, they are looking to appoint a SQA Engineeras such we welcome applicant who meet the criteria below:

You will be responsible for planning and coordinating Quality activities, SQA and New Part Introduction Programmes
Responsible for key elements of supplier development as required throughout the manufacture/supply of parts, from areas identified as shortfalls during the supplier audits.
Responsible for close liaison with Purchasing and Suppliers in the prevention and resolution of non-conforming product.
Responsible for the control of the PSW process for the chosen suppliers and work with Project Management on areas relating to PPAP. This process will vary dependant on the importance of the product or service they supply.
Responsible for establishing, maintaining and reporting on quality records both internally and externally.
Be responsible for close liaison with Engineering, supporting them on project delivery and control in line with the existing Business Operating Procedures
HNC or Equivalent in an Engineering discipline.
Experience with APQP / NPI Process.
Knowledge and experience in applying TS16949 (QS9000) tools and techniques.
Experience with in SQA roles and activities within the automotive sectors.
Computer literate with use of the MS Office suite of programmes.
Knowledge of inspection instruments and techniques.
Extensive understanding of engineering drawings and geometric tolerancing.
Whilst not essential, certification such as Six Sigma, Auditor/Lead Auditor would be an advantage.
Auditor experience to IS9001, TS16949 and environmental standards.

Mechanical Design Engineer - Leicester - £34k - 42k per year + Benefits (PBU-104307)

Apply now

Mechanical Design Engineer
Leicester, Leicestershire, England
£34k - 42k per year + Benefits

Our client is a leading in the field of creative packaging solutions, and due to exception sales and a strong desire to build on it`s successes they are now recruiting a Mechanical Design Engineer, therefore if you feel you meet and surpass the requirements below I look forward to hearing from you: Responsible for the Design and Development of new products using innovation and problem solving skills. In addition you will also be required to create marketing presentations and 3D renderings for sales pitches to customers for their approval using 3D CAD models (Pro-E) for tooling quotations and 2D engineering drawings.

You will also be required to liaise with internal and external suppliers for tooling and part quotations, SLA production etc.

Design and Development of new products
3D CAD Modelling (preferably Pro-E)
2D Engineering Drawings
Liaising with internal and external suppliers for tooling/part quotations

Supplier Quality Improvement Engineer - SQI Engineer - Northamptonshire - £30k - 38k per year + Bonus (PBU-104196)

Apply now

Supplier Quality Improvement Engineer - SQI Engineer
Northamptonshire, England
£30k - 38k per year + Bonus

Based at our clients major manufacturing facility and the lead plant for worldwide sales of high horsepower engines, supplying international markets in the electricity generating, mining, marine and locomotive sectors.

Due to growth plans they are now looking for a SQI Engineerand as such we welcome applications who meet the criteria below:

Will manage the quality interaction with assigned suppliers, including the assessment of a given supplier s quality systems, supplier selection, and traditional quality assurance activities such as corrective action, containment, and process approval.
Manages the successful re-sourcing of current product or process approval of new product utilizing the tools of APQP.
Facilitates regular communications between manufacturing plants and suppliers to resolve supplier quality related issues as required.
Ensures that appropriate actions are in place and corrective action plans are documented from suppliers to address discrepant materials when they occur.
Measure supplier quality performance according to documented procedures and drive appropriate improvements to meet established targets.
Provide input to Commodity Teams in the development of overall sourcing strategies.
Oversees and performs audits of suppliers quality systems and manufacturing processes
Bachelor s degree in Engineering or related curriculum required.
Experience in a Quality/Supplier Quality function.
Experience as a Six Sigma Belt a plus
Working knowledge with overseas suppliers and subcontractors is a plus.
Foreign language abilities are a plus
Product and process knowledge of Machining, Castings, Electronics, Assembly, Stampings and Coatings are a plus.
Working knowledge and auditing experience to ISO 9001:2000 / TS 16949 quality system standards.
Strong analytical and problem solving skills.
Automotive background preferred, with working knowledge of PPAP, APQP and CP, SPC, GDandT, FMEA and GRandR.

Fatigue Engineer (High Cycle Fatigue) - Bradford - £27k - 40k per year + Bonus (PBU-103780)

Apply now

Fatigue Engineer (High Cycle Fatigue)
Bradford, West Yorkshire, England
£27k - 40k per year + Bonus

Our client is a leader in design, manufacture and support of world leading turbo chargers and associated equipment.

Due to growth plans a position of Fatigue Engineer has become available, and as such we welcome applicants who want a fresh challenge, and meet the requirements below

Support new product introduction and rapid problem solving process
To develop and maintain testing specifications and design standards related to High Cycle Fatigue
Present and interpret analysis test data to internal/external customers.
To work in functional and cross-functional teams to improve cost, quality and integrity of analysis and testing.
To liaise with reliability group to understand the relationship between predicted and actual failure rates in the field
Understanding of failure methods and material behaviour
Experience in engine testing procedures.
Knowledge of Ansys and CFX software would be an advantage but not essential.
Experience in fatigue life prediction and/or structural integrity analysis.
Masters/Degree in Mechanical Engineering (specialisation in Fatigue and stress analysis preferred)

Project Manager - Sheffield - £30k - 35k per year (JDW-103288)

Apply now

Project Manager
Sheffield, South Yorkshire, England
£30k - 35k per year

A leading mechanical handling systems company require an experienced Project Manager due to continued growth, the company has grown to become a leading designer and manufacturer of industrial lifting equipment systems and technology to a variety of industry sectors.

Main Duties

Candidates must have working knowledge of the lifting equipment industry in a similar role.

-Will be managing high value capital projects to time and cost, responsible for the management from award through to completion of all technical aspects of a project, ensuring the business requirements are fully understood and incorporated to an agreed brief
-Responsible for customer liaison from the beginning of project at the bidding stage through to completion of the project.
-Regular site visits to ensure project running to time and budget
-Should have background including fabrication work, structural, site installation work and machined components
Candidates should have previous experience working with a vareity of lifting equipment within a manufacturing environment

Experience required

Qualified ideally to at least HNC in mechanical engineering or with a recognised project management qualification.
Candidates must be self-motivated, enthusiastic whilst working to your own initiative.
You must also be IT literate using programmes such as Microsoft Excel, Access, Word and AutoCAD
-Candidates should be fully conversant with 3D design work, ideally using Solidworks

Electrical Design Engineer - Banbury - £28k - 50k per year + Benefits (PBU-100551)

Apply now

Electrical Design Engineer
Banbury, Oxfordshire, England
£28k - 50k per year + Benefits

Our client is a leading technical supplier to the automotive industry, and due to exceptional growth plans and current business requirements, they are looking to appoint a Electrical Design Engineer as such we welcome applicant who meet the criteria below:

In this role you will be required to design and deliver solutions for the electrical and vehicle integration aspects of engineering projects
. You will need to provide expertise in the areas of vehicle electrical systems and vehicle networking, as well as keep abreast of future developments in all areas.

Design of vehicle electrical systems
Interfacing to vehicle networks (e.g. CAN)
Validation of vehicle electrical and diagnostic systems
Preparation of electrical schematics.
Design of vehicle harnesses.
Specification and selection of electrical components including sensors, connectors and actuators.
Testing and evaluation of electrical components.
Integration of components and systems onto existing vehicle systems.
Preparation of BOMs and liaison with component and wiring harness suppliers.
Commissioning and fault finding of vehicle electrical systems.
Preparation of FMEAs and design validation documentation.
Preparation and monitoring of project plans.

Senior CAD Interior Trim Engineer - BT190 - Coventry (JCO-102494)

Apply now

Senior CAD Interior Trim Engineer - BT190
Coventry, West Midlands, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

We are recruiting for Senior CAD Interior Trim Engineer, initially on a 6-month contract based in Coventry.

As Senior CAD Interior Trim Engineer, you will design and develop Catia V5 models for the Interior / Exterior Trim Department, this includes headlining, pillar trim, quarter trim and load space models on current / new projects.
* Store working models into structured database to support project reviews and DMU processes.

Applicants are required to be degree qualified or hold a similar qualification, plus:
* Strong numeracy and literacy skills
* Automotive experience is essential
* Good logic reasoning
* Be an effective team member contributing to improvements and high customer service.
* Demonstrates depth of knowledge in a relevant techical specialisty
* Experience in the `Team Centre` data management systems would be benefit.

CCTV Product Specialist - United Kingdom - £27k - 37k per year + + benefits package inc HC/PEN etc (GCK-104753)

Apply now

CCTV Product Specialist
United Kingdom
£27k - 37k per year + + benefits package inc HC/PEN etc

As a leading global engineering company, my client provides innovative solutions to help tackle the world s major challenges, across the key industrial sectors of energy, industry and healthcare. The company employs 16,915 people in the UK, including about 6,000 in the manufacturing sector.
The CCTV Product Specialist (known as CPS) is responsible for, but not limited to, providing comprehensive Sales Development and Product Support for all current and legacy video products either remotely via phone/email or onsite.

This will include conducting customer presentations and sales visits as well as providing Sales and Product training courses to a variety of audiences internally and externally to the business.

This role will require the CPS to influence and assist the sales teams in reaching CCTV targets set by the business.

The CPS will be expected to have local responsibility for liaising with Global PM and marketing regarding the launch, suitability, local training and testing of newly released products to the UK market.

They would provide relevant information and feedback back to HQ, assisting Sales in project support and demonstrations, whilst gathering, assembling and delivering appropriate market data for helping to identify future market requirement.

Shared responsibility for > 1M revenue in the UK and Ireland Business on CCTV and a key contributor to the overall team target.
Strategy: To provide comprehensive Sales and product support on all current and legacy CCTV products by appropriate on or off site communication methods.

Assisting in preparing, delivering and updating sales training and mentoring in line with the sales strategy. Assisting and advising in conjunction with the Training Manager training documentation in line with the training strategy.

Performance: To deliver high and consistent service levels to different stakeholders. To ensure sound business judgement and effective time management is used to provide optimum support.

Financial Management: Recognising and reporting and assisting in any potential sales opportunities that may arise through day to day customer contact. Operating sound business and financial judgement when conducting the role to operate within the confines of responsible business expenditure. Monthly management reporting, logging data onto Companies CRM.

Controls Engineer (Contract) - Oxford - £25 - 32 per hour (KYU-104501)

Apply now

Controls Engineer (Contract)
Oxford, Oxfordshire, England
£25 - 32 per hour

Our client is a leading prestige automotive manufacturer based in Oxfordshire who are looking to recruit a Controls Engineer familiar with PLC installation, robotics and automation. The Facility Planner is responsible for the project planning, installation and optimisation of assembly hardware and related logistics hardware systems to agreed cost and deadline targets. This covers the feasibility, specification, supplier selection, cost, quality, ergonomics, environment and availability of the technical solutions. The Maintenance Engineer is responsible for maintaining and optimising the facility when in operation; and supporting the planner in specification development and installation of new facilities. All activities must be carried out using core VPS principles.
This role will involve working with a key supplier to ensure a smooth installation of PLC`s, robotics and automation and minimal downtime on start-up.

You will have knowledge including machine control, automation, robotics and control engineering. Advance problem resolution techniques and good preventative maintenance techniques.
Educational requirements: For the Planner Degree/Masters with 3-5 years experience. For the Maintenance engineer a HND with 3-5 years relevant experience.
Relevant Knowledge including machine control, automation, robotics and control engineering, building services, hydraulics, pneumatics, project management, IT networks, technical drawing skills, software design skills, machine operator protection and health and safety.
Advanced problem resolution techniques and good preventative maintenance techniques.
Good leadership and project planning skills are required.
Must be able to communicate with internal and external International partners and have the ability to sell concepts and communicate technical solution effectively.
Must be flexible in time and work place (inc. temporary international assignments)
Good knowledge of VPS principles.
Good office IT skills.

Structures Planner - Oxford - £25 per hour (KYU-104503)

Apply now

Structures Planner
Oxford, Oxfordshire, England
£25 per hour

Our client is a leading prestige automotive manufacturer based in Oxfordshire who are looking to recruit a Structures Planner to handle building and layout projects in Assembly In Plant in Oxford.

Core Responsibilities:-
- Concept Evaluation and Feasibility investigations
- Development of detailed Structure and Vehicle Assembly plans to VPS principles.
- Ensure plans are compatible with the overall Central Site and Assembly strategy.
- The job requires development of Vehicle Assembly and Structure layout options within the parameters of the appropriate reference scenarios, site strategies and vehicle build requirements, including LPD (Long term Plant Development.
- A broad view of possibilities and options are needed to be generated in the creation of an efficient plan.
- An understanding of the cost and change management system is required with an ability to negotiate with process partners essential.

Skills & Experiences:-

- Degree/Masters with 3-5 years related experience
- Project management skills
- Knowledge of manufacturing including assembly techniques, problem solving skills and project planning.
- Ability to lead a project
- Layout drawing skills with Microstation or similar.
- Excellent written and oral skills
- Good office IT skills
- Must be able to communicate with internal and external International partners and have the ability to sell concepts and communicate technical solution effectively.
- Must be flexible in time and work place (inc. temporary international assignments).

Project Engineer -Installation & Commissioning - Oxford - £35k - 38k per year + Car, Pension, Bonus (KYU-103331)

Apply now

Project Engineer -Installation & Commissioning
Oxford, Oxfordshire, England
£35k - 38k per year + Car, Pension, Bonus

Our client is a leading prestige automotive manufacturer and is looking for a Lead Engineer.
The Project Engineer is responsible for the project planning, installation and optimisation of assembly hardware and related logistics hardware systems to agreed cost and deadline targets. This covers the feasibility, specification, supplier selection, cost, quality, ergonomics, environment and availability of the technical solutions. The Project Engineer is responsible for maintaining and optimising the facility when in operation; and supporting the planner in specification development and installation of new facilities.

Responsibilities:
*Project Manage
*Compare feasibility studies
*Create, develop and approve specifications
* Analyse and decide supplier selection
*Create Timing plans
*Create and manage costs
*Manage implementation and installation of machines and equipment
*Problem resolution
*Create documentation
8Carry out and initiate measure to prevent failure techniques
Educational requirements: For the Planner Degree/Masters with 5-10 years experience. For the Maintenance engineer a HND with 5-10 years relevant experience.
Relevant Knowledge including machine control, automation, robotics and control engineering, building services, hydraulics, pneumatics, project management, IT networks, machine operator protection and health and safety.
Advanced problem resolution techniques and good preventative maintenance techniques.
Good leadership and project planning skills are required.
Must be able to communicate with internal and external International partners and have the ability to sell concepts and communicate technical solution effectively.
Must be flexible in time and work place (inc. temporary international assignments)
Good knowledge of VPS principles.
Good office IT skills.

Software Engineer - West Midlands (KYU-103357)

Apply now

Software Engineer
West Midlands, England

The Role

This vacancy exists due to growth in our clients portfolio of safety systems for some of the world s most exciting sports, luxury and low carbon production vehicles, mass production vehicle applications and demand for safety critical embedded software in many market sectors. As a member of a multidisciplinary team, you will apply cutting edge software engineering, customer liaison and technical support skills to product consultancy and applications projects from concept to production. Examples include driver assistance, braking, steering, sensing, actuation, vision and wireless communications systems in automotive, aerospace, defence, intelligent transport and other sectors.
What you ll do

Be a member of the Software Group reporting to the Group Leader
Work in project or work package teams
Produce system and software specifications, software designs, coding in embedded C and C++ using a range of software testing techniques
Contribute to project proposals and quote preparation
Contribute to the development of engineering processes and procedures
Liaise with external agencies, partners and institutions
What we are looking for

Essential:
First degree or higher in a related discipline including software and electronics aspects
Good communication and inter-personal skills for team working and customer liaison
Willing and able to occasionally visit customer facilities in UK, EU and USA
*2-3 years experience

Desirable:
Knowledge of structured system design, UML and/or model based development using Matlab/Simulink
Knowledge of control system design, modelling and simulation
Able to use initiative and be self motivated

Software Engineer (Steering Systems ) - Cirencester - £0 per hour + Market Rate (KYU-102936)

Apply now

Software Engineer (Steering Systems )
Cirencester, Gloucestershire, England
£0 per hour + Market Rate

Our client is a major supplier of advanced electronic controls, wiring and body electrical systems to the automotive industry. We are seeking to appoint a Software Engineer (Steering Systems) on a 6-month contract based in Cirencester.
As Software Engineer (Steering Systems), you will make a major contribution to the development of high quality, robust software solutions using state of the art techniques to meet the stringent safety and performance demands of this rapidly expanding market.

As part of this team, you will develop your expertise in:
* Control software development: Real time control of vehicle steering controls
* Software Architecture development: Design and development software architecture and components in an Autosar environment
* System Application: Tailoring software components to meet the needs of a global customer base and to ensure that legal, customer and performance and safety standards are achieved
* Safety Systems: Design and implementation of software to meet all relevant safety standards, including ISO26262
* Customer management: To ensure that the development process runs smoothly, regular direct contact with the customer is essential, from defining system requirements to final performance sign-off
Applicants are required to have the following experience:
Essential -
* Degree or equivalent qualification in an engineering discipline
* Proven experience as a software design engineer
* Real-time, embedded C skills with hands-on debugging experience
* Good practical knowledge of embedded software development methods and tools
* Understanding of the software development process for real-time, low cost, high volume systems

Desirable -
* Automotive embedded software experience
* UML Design experience
* TargetLink experience
* Experience of Autosar architectures
* An appreciation of digital electronic hardware