Senior Test Engineer - Cheshire - £30K-£45K (887040)

Apply now

Senior Test Engineer
Cheshire, England
£30K-£45K

New permanent aerospace Senior Test Engineer in N West

Description
Part of a major global aerospace group engineering mechanical aerospace systems, there is an interesting new opportunity for a permanent Senior Test Engineer. The role could also be called Senior Development Engineer This opportunity is in commutable range of Liverpool , Manchester, Warrington and Runcorn.

Job Requirements
The Senior Test Engineer will be involved in all aspects of a project from test planning to generating test plans to test execution and then generation of test reports.

Details
You will preferably be degree qualified in either Electrical/Software or Mechanical Engineering. You will have experience of the full product life-cycle of testing mechanical components and assemblies. Aerospace experience is ideal but is not essential. You will likely have experience in some of: hydro-mechanical and electro-mechanical equipment, electrical and electronic design, hardware/software fault finding and testing, NI equipment and LabView programming, DSP,- FPGA and circuit design. PLC programming would be a bonus as would be HALT/HASS methods and Weibull statistics/analysis.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Sales Manager - Weymouth - £40k per year (RHN/887115)

Apply now

Sales Manager
Weymouth, Dorset, England
£40k per year

Scope:                                    Lead the sales activity to achieve company strategic goals and be a member of the strategic Management team for the Business

KEY RESPONSIBILITIES:

• Management of Sales team
• Achieve sales and margin targets
• Manage customer relations
• Manage marketing and exhibition activity
• Work in conjunction with management team to ensure business goals are met
• Work within agreed budgets
• Develop and deliver sales strategy to support growth plans
• Produce sales activity reports as required
• Part of the strategic management team for the business.

GENERAL RESPONSIBILITIES:

• To conform to company policies and procedures
• To participate in continuous improvement activities

Flexibility:

• Flexibility is Key to the success of lean organizations and in this respect you may be asked to assist in other departments should time permit. Such requests will not be deemed as unreasonable.

MEASURES:

• Order intake – Existing customers and New business
• EBITDA
• Customer profitability

Key attributes are:

• Precision Engineering and or Fabrication Background.
• Sales and New Business Development experience.
• Used to working to challenging targets.
• Estimating from precision engineering drawings.
• Driving license.
• Strong interpersonal skills
• Basic IT skills on Excel and Outlook.
• Strong team leader
• Confident and proactive.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Applications Engineer - Coveney - £25k - 35k per year + Car (887089)

Apply now

Senior Applications Engineer
Coveney, Cambridgeshire, England
£25k - 35k per year + Car

A application engineer is required by world leader in the field of advanced fuel injection systems to the car, truck and industrial sectors. This is an exciting and rewarding role for an experienced Account Manager to be the prime interface between the business and its global customer base.  This organisation is continuing to develop and innovate its product range, supplying high technology engineered products to leading automotive OEMs globally.

To handle engineering and commercial activities related to existing Powertrain component business and to assist in the growth of that business.

Handling daily issues relating to the engineering and commercial aspect of Powertrain components business, these issues may originate from the customer side.

• Solving  those issues where possible/appropriate and/or establishing how best to resolve them in conjunction with the appropriate depts / manufacturing sites
• Ensuring the appropriate and timely progression of projects, with reporting and escalation as required to Sales UK management,
• Identifying and progressing areas of business expansion in conjunction with Sales UK management.
• Presenting to the Customer in support of expansion activities or project related issues.
• Support to the SQA team on quality and warranty related activities.
• Participation in and management of VA/VE activities internally and towards the customer.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Resident Engineer - Warwickshire (887114)

Apply now

Resident Engineer
Warwickshire, England

One of the Worlds number one producers of diesel fuel injection and engine management systems are now looking for a Resident Engineer to be responsible for the sales of many components and systems supplied to UK based customers.
The Resident Engineer will work on airbag and ESP systems based at Warwickshire.

As the Resident Engineer you will be responsible for:
The technical support for active and passive safety systems
Technical project management support
Define mounting positions for airbag systems in vehicle
Contribute to software/system trials including EMC
Failure analysis and problem solving
Update programming of systems.

The successful applicant will hold an engineering degree or equivalent with knowledge of inertial sensor technology and an understanding of vehicle dynamics.
Experience with systems/applications is desirable.
You must be self motivated and have excellent organisational skills.

Must possess a clean driving license and be willing and able to travel regularly.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Planning Manager - Banbury - £30k - 40k per year (887074)

Apply now

Planning Manager
Banbury, Oxfordshire, England
£30k - 40k per year

Who for: A world’s leading food manufacturer that employs around 6,000 employees in 27 country’s throughout Europe are looking for a motivated Planning Manager.

Overview: You will be managing the planning team in order to achieve departmental targets. Responsible for developing the planning team to meet future requirements and ensure plans are in place for job succession. Responsible for optimizing and continually improving the local planning processes in order to maximize manufacturing output and achievement of targets.

Tasks: To lead, manage, motivate, coach and mentor the Planning team and warehouse personnel and develop the team through regular PMDPs and appraisals. To achieve and report departmental progress against budgets and KPIs (fiscal budgets, raw material and finished stocks, shelf-life, rework etc) To co-ordinate outsourcing and co-manufacturing activities in conjunction with central planning and sub co in Wieze. To liaise directly with both internal and external partners to track progress. To assess local planning systems and job processes, in particular to focus on liquid planning to ensure a robust succession plan in line with Group systems.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Systems Engineer - Stonehouse (105372)

Apply now

Systems Engineer
Stonehouse, Gloucestershire, England

A world leader in the field of advanced fuel injection systems are now looking for a Manufacturing Systems Engineer

A world leader in the field of advanced fuel injection systems to the car, truck and industrial sectors are now looking for a Systems Engineer or Graduate Manufacturing Systems Engineer to work on either a permanent or contract basis to take responsibility for providing technical engineering support and expertise for new product/process introduction programmes and implementing strategies for improving manufacturing process capability


The Manufacturing Systems Engineer responsibilities will include but are not limited to:

Providing expert knowledge of high volume diesel fuel injection equipment manufacturing processes including close tolerance machining, assembly and test systems.
To improve manufacturing performance with regard to process capability, output, productivity and cost.
To deliver manufacturing process documentation and training in line with business training standards (5 Star process)
To maintain a clean and tidy operating environment at all times through an active and practical approach to all HSandE issues
To improve the efficiency of the Manufacturing Engineering processes through participation in continuous improvement projects

As the manufacturing Systems Engineer you will have experience (or interest) in one or more of the following fields:-

Qualified to degree level or equivalent in an engineering discipline with an interest in manufacturing
High volume precision grinding and super finishing operations
Automated assembly
High volume hydraulic performance testing and control systems
Best practice solutions for cell design and material flow management
Actively contribute to the running and success of multi-disciplinary project teams.
Excellent presentation, communication and interpersonal skills.
Previous knowledge and experience of Fuel Injection Equipment is desirable, but not essential

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Manufacturing Engineer (Composites) - Bristol (RB-105433)

Apply now

Senior Manufacturing Engineer (Composites)
Bristol, England

A first tier supplier to the global aviation industry and a leader in the manufacture of highly complex composite and metallic aerostructures and engine products. The company is equally focused on military and civil markets.
A vacancy has arisen for a Project Engineer initially this will focus on the VITAL project, the aim of which is to participate in the development of an engine composite fan blade.
Candidates should be able to demonstrate previous successful experience in the co-ordination of engineering and production activities as part of a development programme. Liaison with customers, suppliers and partnering organisations will form a significant element of the role.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Technical Support Engineer - Oxfordshire (RB-103912)

Apply now

Technical Support Engineer
Oxfordshire, England

Our client is the leading Aluminium sheet supplier to the Automotive industry within Europe. Volumes of Aluminium sheet are set to increase dramatically over the coming years as the Automoive industry strives towards light vehicles to meet the ever increasing targets of vehicle efficiency, CO2 reduction. They are currently looking to recruit a Technical Support Engineer.
Part of small team supporting UK automotive customers. Responsible for providing customer support throughout program start-up and production.
Manage claims from OEM s and tier 1 suppliers. Work in partnership with supplier quality to achieve best solution for customer.
Pivotal role in start-up of world first aluminium intensive monocoque saloon. Responsible for on-time and quality order delivery to UK and Europe. Challenges involved smooth implementation of new cut-to-length line, laser cutting facility and logistical supply route.
First line of support to Jaguar press-shop, based at Castle Bromwich for two years. Applying Ford Global 8D process to solve production-related problems.
Set-up logistics to store and deliver 500ton/week of Aluminium sheet to customer.
Thorough understanding of through process repercussions of all decisions made, including impact on body/paint shop and end customer.
Participated in Ford Supplier Technical Assistance engineers course. Imparted working knowledge of Global 8D problem solving, failure mode and effect analysis and statistical process control.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Manufacturing Engineer - Gillingham (105339)

Apply now

Manufacturing Engineer
Gillingham, Kent, England

Manufacturing Engineering - Program Leader required for an automotive company based in Kent

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Manufacturing Engineer - Program Leader to work on a permanent or contract basis to take responsibility for the planning and co-ordination of the Pump Manufacturing Engineering Phase.
Main responsibilities of the Manufacturing Engineer will include:
Customer Programs, collect the information from within Product Engineering and Project Management , build a specification package, set a plan with Manufacturing Engineering Leaders to ensure Process readiness in due time to match customer milestone.
To set up regular meetings with the Manufacturing Leaders to review progress and to issue a regular report.
Prepare Drawing and Model packages as requested by ME Leaders to provide to suppliers.
Follow all ME Prototype and Sample Requirements to carry out the necessary trails and Machine Qualifications via DDP System.

To co-ordinate with the MEAQEs to ensure the correct level of documentation (PFD, PFMEA, CP, Standards Cell and EOP) are completed.

Must be self motivated with good English spoken and written.
Must be able and flexible to travel in Europe (Spain, Romania) and willing to work in an international environment.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Manufacturing Manager - Development - Suffolk (105952)

Apply now

Manufacturing Manager - Development
Suffolk, England

A leading supplier of sugar to the UK market, producing an extensive range of sugar products to international food, drink and pharmaceutical manufacturers are now looking for a Development Manufacturing Manager.
As the Manufacturing Manager you will identify, develop and integrate manufacturing opportunities and solutions across Finished Product sites which deliver measurable and sustainable improvements in Safety, Productivity, Cost, Quality, Service and Reputation.
The successful candidates' responsibilities will include but is not limited to:

Develop and implement Equipment Availability Strategy at site (Asset utilisation and strategy, maintenance regime):
Maintain and execute Asset Roadmap to deliver Corporate Strategy and Goals
Maintain and execute rolling 5year equipment and asset care strategy (repair vs replace)

Ensure alignment and cohesion across Site, Supply Chain and Corporate Objectives and in line with CAPEX and OPEX targets br

Drive continuous improvement across Finished Products to ensure:
Consistent performance metrics and targets are implemented and achieved for Assets - reliability, productivity and availabilitybr
Effective business case design and evaluation for Finished Products CAPEX and OPEX Equipment Availability Projects (objectives, scope, approach, deliverables, tender design, supplier evaluation, resource requirements and timelines)

Advocate and Champion World Class Manufacturing Base across Finished Product Sites:
Influence and encourage collaboration, knowledge sharing, best practice across the Finished Products and Site Engineering

The Manufacturing Manager will hold a degree in a relevant engineering discipline with extensive and demonstrable experience of conveying and packaging equipment within FMCG/Food sector manufacturing
Broad experience in initiating and leading equipment reliability improvements in a high-volume, FMCG/Food manufacturing environmentbr
Experience of working in a lean operating environment, and as part of a high-performance team and experience of identifying, developing and implementing process and operational change within a FMCG environment.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Design Engineer - Warwickshire - £300 per day (887101)

Apply now

Mechanical Design Engineer
Warwickshire, England
£300 per day

Our client is a precision low volume high performance vehicle manufacturer.

They are currently seeking to appoint 3 contract designers for an initial period of 6 months.

The individual will be responsible for the following:

- Accurate creation and upkeep of BoM information pertaining to engine programs
- Liaise with Managers to review status and priority of engine tasks
- Creation of designs and drawings in a timely manner
- High quality designs supported by right first time principals
- Health and Safety of his or herself within the work environment
- Day to day management of their tasks
- Technical development of engine components and systems
- Building inter departmental working relationships
- Championing best practices
- Liason with external suppliers

ROLE REQUIREMENTS

- Must be able to use CATIA V5 - over a year`s experience or at least 1000 hours.
- Must have previous experience of designing highly stressed and precision parts eg engines, turbines, transmissions etc
- All round knowledge of mechanical engineering practices and systems
- Knowledge of components and their use in high performance engines.
- Ability to read and create engineering drawings
- Ability to use CAD software
- Ability to create and release engineering instructions via ECNs
- Ability to deliver results towards company goals and objectives
- Any industry experience
- Capable of "doing" not just "delegating"

Ability to use static / dynamic analysis packages and ability to supervise others are also desirable skills

PERSONAL COMPETENCIES:

- Creative and Innovative
- Excellent problem solving skills
- Flexible and adaptable
- Excellent written and oral communication skills
- Good team player with excellent time management
- Thorough in approach

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Planning Team Analyst - Uxbridge (106664)

Apply now

Planning Team Analyst
Uxbridge, Greater London, England

REQUIREMENTS: As the Planning Analyst you will be responsible for:
Support daily schedules/ production upon request br
Maintain and grow relationship to customer br
Build, manage and maintain good relationship with sales colleagues to pre-empt logistics and / or process issues br
Run in / out coordination br
Support with accounts queries where linked to logistics br
Support packaging issues, returnable loops and tracking br
Review and enhance existing processes in liaison with customers and plants br
Quarantine parts management and support br
Build, manage and maintain good relationship with SQW colleagues and promptly react to logistics-related quality issues, support quality audits and ensure processes are coherently followed br
Ensure timely update of relevant parts of SCC logistic report br
Represent the Planning team at all times br
Cover in colleague's absence if needed br
Assist timely and successful roll-out of GLORIA system (SAP) at RBGB with special regard to listed customer. br
DESCRIPTION: One of the Worlds number one producer of diesel fuel injection and engine management systems are now looking for a Planning Analyst to work as part of the PlanningTeam who are responsible for logistics planning (supply planning, scheules, advise on logistics routes, transport means and packaging loops) for approximately 60 OE automotive companies.
VAC REQ :The successful applicant will be educated to A Level or equivalent however a degree in a relevant discipline would be preferred. br
br
The Planning Analyst must have a solid understanding of logistic supply chain/basic planning methods along with a strong customer focus.br
Previous experience in a logistics or planning environment, Original Equipment (OE) and logistics customer accounts management is desirable.br
Must have German language skills and a good command of the English language, both written and verbal. Any additional languages are also desirable br
Strong IT skills possibly SAP knowledge and confident use of core MS Office applications.br
EVA knowledge is desirable. br
You must be self motivated and take a structured approach to tasks with excellent organisational skills br
Must have a clean driving licence br

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Design Engineer - Park Royal (106192)

Apply now

Senior Design Engineer
Park Royal, Greater London, England

REQUIREMENTS: As the Senior Design Engineer you will report to the Heavy Duty Nozzle Product Manager and your responsibilities will include but are not limited to:br
br
To innovate solutions to the company's product requirements and generate specifications to required standardsbr
To participate and progress design analysis activities including FEA, Dimensional Analysis, DFMEA and Critical Features Analysisbr
To modify specifications and to assist in the implementation of product and process improvements in accordance with overall project objectives. br
To co-operate with suppliers and in-house manufacturing to achieve highest practical quality with lowest investment and product costs. br
To lead nozzle design and development activities for assigned customer and internal projectsbr
To coordinate product inspection work for assigned projectsbr
To coach and train colleagues, trainees, technicians, etc. as reqd. br
To contribute to Total Quality, QS 9000 and continuous improvement activities within department and businessbr
DESCRIPTION: A World leader in the innovation, design and manufacture of diesel fuel injection equipment are now looking for a Senior Design Engineer - Heavy Duty Nozzles to be responsible for the specification of diesel fuel injection equipment for the heavy duty business.
VAC REQ :The successful applicant will hold a degree in mechanical engineering or equivalent with proven experience in design of mechanical systems, preferably high precision, highly stressed and mass produced components.

Candidates will be able to demonstrate:br
CAD Experience - Solidworks preferred - detail drawing and geometrical tolerancing.
Design Tools Experience - DFMEA, DFA, DFM, FEA, DOE (eg Taguchi), the more the better, but not essentialbr
Experience of liaising with customers, suppliers, development, validation and manufacturing functionsbr
Arranging meetings, compiling agendas and writing minutes br
Report writing for design activities, documenting design decisions, analysis methods and results.
Familiarity with manufacturing processes eg grinding, heat treatment, injection moulding, forging, casting.br
br
Must be a self motivated, team player with an enquiring mind and a good understanding of engineering fundamentals

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer - Fuel Pump - Gillingham (JUM-106721)

Apply now

Design Engineer - Fuel Pump
Gillingham, Kent, England

Delphi Diesel Systems are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment and are now looking for a Design Engineer to work on a contract basis.

As the Design Engineer you will develop concepts and detailed drawings for components used in developing a low cost CR pump for the automotive market based on a current design.

Therefore they will be involved in the conceptual phase and will be responsible for design content on components for the pump in conjunction with the Lead Designer for that pump.

The Design Engineer will also be responsible for FEA analysis and other modelling either directly or through the utilisation of other department or organisation resources.

Design and detailing of components for developing a low cost CR diesel fuel pump for the automotive market.

Apply FEA and other numerical analysis tools for the design and optimisation of the product.

Conduct competitive analysis and bench marking of competitors components for function and cost.

Conduct analysis of other leverage product areas for new ideas to advance the art in pumps (new stretch ideas)

Apply ICIM methods using DOE s, 6 Sigma, Green Y and other statistical tools to achieve design robustness. (Training will be provided to fill current gaps in experience level)

Assure GDandT and other drafting standards are applied to new component drawings.

Recommend design changes that assure the program meets cost, DFM, performance and timing goals.

Drive appropriate balancing of product performance and cost requirements with input from Lead Designer.
The Design Engineer will hold an engineering degree in mechanical engineering or equivalent with Solidworks experience including FEA analysis.

Experience of HP pump and/or fuel systems is required along with proven experience in design and/or development engineering.

Must understand and apply physics to the design.


The successful applicant must be willing to travel for training, work with customers and for problem resolution on projects as necessary.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Project Leader - Gillingham (JUM-104185)

Apply now

Project Leader
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Project Leader - Pumps to work on either a permanent or contract basis to co-ordinate all the engineering activities on specific customer pump applications both in development and production, be the customer technical interface, and represent Engineering in cross functions teams.

The successful Project Leader will report to the TPL Manager.
The Project Leaders main duties will be drawn from the following:

Manage the Engineering activities to ensure alignment with overall project timing and manage the escalation and resolution within Engineering.

Lead the technical communication with the customers to ensure customer technical requirements are understood, and resolve any technical roadblocks.

Communicate effectively, develop and conduct regular technical presentations internally, and to customers.

Prepare and own customer related documents such as validation reports, customer specific DFMEA reviews, CPS etc.

Agree pump packaging with the customer and ensure interface drawings are released with correct QCI and KPC definition,
Define prototype definition (BOM) for all development and PPAP samples.

Lead and apply PDP process for Design reviews and represent Engineering in Gate reviews.

Prepare minutes/action plans following meetings to ensure all affected teams are appraised of progress at all times.

The Project Leader must have excellent organisational skills, be an organised and disciplined team player who pays attention to detail.

Travel will be required to ensure customer meetings are supported and key deliverables/launches at the plant are prepared for. Therefore the successful applicant must be willing and able to travel at short notice.


German, speaking, reading and writing would be an advantage

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Applications Engineer (Rotary Fuel Systems) - Gillingham (JUM-105356)

Apply now

Applications Engineer (Rotary Fuel Systems)
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for an Applications Engineer (Rotary Fuel Systems) to work on either a permanent or contract basis on the application and development of rotary FIE specifications from initial samples right through to production release.

As the Applications Engineer your skills required include a thorough knowledge and understanding of diesel engine performance and mechanical rotary FIE systems, combined with a practical aptitude to cope with the hands on aspects of this job.
The Applications Engineer will take responsibility for / or providing support to (depending on skills) all aspects of the mechanical rotary FIE system development on a range of off-highway engine applications.

Organise the procurement, testing and supply of sample FIE that meets the customers performance targets and project timing requirements.

Liaise with customers (including short periods at their premises) providing support to the development programmes, and give training on rotary FIE systems.

Assist with performance and production quality troubleshooting, engage with the customer and manufacturing to devise and carry out test work on rig, engine or vehicles as required.

Work with the pump / injector development teams, and Project Managers to deliver cost effective, capable products that meet the customers expectations.

The successful applicant will hold a degree (or equivalent) in mechanical engineering or related subject.

Required experience:

Experience of diesel engines and mechanical rotary fuel injection systems.

Must be self-motivated, team player with good interpersonal skills, and able to work in a multi-disciplinary group with limited supervision.

Must have the ability to work under pressure and manage several tasks at once.

Our client is also looking for a good communicator, with presentation skills, to enable liaison with internal design and development teams as well as good written and spoken fluency in English .



This position will involve some travel therefore the successful applicant must be able and willing to work away from home, and overseas for short periods.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Development Engineer - Gillingham (JUM-105350)

Apply now

Senior Development Engineer
Gillingham, Kent, England

Delphi Diesel Systems are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for Senior Development Engineers to work on a permanent or contract basis.

As the DSenior Development Engineer the main duties will be drawn from the following:

Plan, organise and execute performance optimisation and performance validation tests, on rig, engine and vehicle determine design improvements to develop performance.

Development of prototype assembly processes / tools

Problem solving - apply a methodical and logical approach to problem solving based on fundamental engineering principals.

Debug unexpected product behaviour and root cause analysis of failures. Devise product changes to resolve performance issues.

Reporting prepare formal written reports, summary reports and presentations to keep the team informed of status.

Contribution towards formal gate reviews.

Participate in design reviews, DFM, DFMEA workshops, product specification definition.

Specify and develop performance test facilities including test protocols

Participate in team orientated activities engage support from outside of the team where necessary to ensure team objectives are met.

Cross functional communication

As the Development Engineer you will be degree qualified in Mechanical Engineering or related discipline.

Post graduate experience in one of the following areas:

automotive component engineering, design and development, or engine calibration


Excellent communication skills are essential.

As the Development Engineer you will need to be able to communicate via reports, memos and presentations for which the applicant will need to be proficient in use of MS Word, Excel and Powerpoint.

Must be data driven not just opinion based.


Personal strengths should include:

Confidence, self-reliance, goal oriented approach, with strong team interaction skills.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer - Senior (Nozzles) - Gillingham (JUM-106722)

Apply now

Design Engineer - Senior (Nozzles)
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Senior Design Engineer - Nozzles to work on either a permanent or contract basis to generate nozzle design solutions to meet anticipated future customers demands.

As the Senior Design Engineer you will provide innovative and competitive new nozzle design solutions to ensure that our next generation injector products are compliant with future emissions legislation and anticipated customer requirements.

Engage cross-functional support between the following groups/ resources for successful project execution:

- Design

- Simulation

- Prototype manufacture

- Hydraulic test and validation

- Engine test

- Manufacturing



Responsible for the initial feasibility phase up to proof-of-concept . Ensure efficient handover to product teams once proof of concept has been completed.



Use IandCIM methodologies to ensure that robust designs are developed.



Ensure competitive solutions are developed Collate competitor data, benchmark and formulate a competitive development roadmap.



Anticipate evolutionary and revolutionary developments and initiate plans to realise solutions.



Build-on existing competencies within advanced engineering, and to grow the team.

As the Senior Designer you will have good experience in a role where you have exercised significant influence and independent judgement on the design of precision automotive component/s from a senior decision making position.



Whilst experience with diesel fuel injection technology will be an advantage, applicants will also be considered from related technologies.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Design Engineer - Berkshire (PBA-105008)

Apply now

Design Engineer
Berkshire, England

Xtrac Ltd is a world leading supplier of high performance transmissions, they are now looking for a Design Engineer to be responsible for the design and detail of engineering components and complete systems, using the companies 3D CAD system to defined standards.

This is an excellent opportunity to join a company that for over two decades has ensured that customers from all sectors meet, or even exceed, their targets by drawing on their unique blend of design, engineering and manufacturing capabilities.

Specialising in Transmission Technology, supplying the Aerospace, Automotive, Defence, Marine and Motor Sports Sectors.




The Design Engineer will be responsible for CAD modelling and drafting on Unigraphics, creating and issuing of Engineering Drawings.

Establish, maintain and manage a strong working relationship with new and existing customers, at all levels.

Work as part of the core Engineering team - utilising the skills and experiences of Gear Technology, Production Engineering and key shop floor personnel.

Liaise with and provide guidance to the Commercial Function and Manufacture Project Managers.

Maintain suitable issue control and Bill of Materials for the parts and projects and in a timely fashion.

Advise corrective action to shop floor queries and non-conformance.

Carry out any reasonable additional duties as requested by management.

Candidates will be degree qualified, ideally with experience of gears, gearbox, transmission / driveline / powertrain systems or similar high-precision rotating components.

Use of Unigraphics NX.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Quality CMM Inspector - Warwickshire - £170 - 200 per day (887091)

Apply now

Quality CMM Inspector
Warwickshire, England
£170 - 200 per day

Our client is a high precision, low volume, machining company with links to motor racing powertrain.

They are currently seeking to recruit a Quality CMM Inspector to start in April 2012. The contract will initially run until December 2012.

The individual will be responsible for the following:

* Using specified sample plans, be able to check mechanical components to ensure parts meet specification, for example castings and machined components.
* Carrying out detailed inspection and measurement of first-off samples utilising GDandT.
* Programming and operating Co-ordinate Measuring Machines (CMMs).
* Completing concession information and create reports/overview, communicate effectively with manufacturing, planners and quality engineers and the wider business as appropriate.
* Maintaining computerized inspection for the inspection activities, such as non-conformance reporting.

Skills/Knowledge/Experience:

* Previous inspection experience within a low volume high value precision engineering manufacturing environment.
* Programming experience of CMMs in particular Mitutoyo Cosmos Software. The following will also be desirable, Zeiss Calypso, Umess and PCDMIS.
* Capable of using standard inspection equipment and able to read engineering drawings.
* Craft Apprenticeship and/or Mechanical NVQ.

Personal Competencies:

* Excellent communication skills.
* Highly organised with good attention to detail.
* Ability to rigorously follow defined processes.
* Ability to flex and work under pressure to meet tight deadlines.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Electronics Engineer - Oxfordshire (PBA-104961)

Apply now

Electronics Engineer
Oxfordshire, England

Williams Hybrid Power are developing electric flywheel energy storage technology for mobile, hybrid and electric vehicle applications and are now looking for a full time Electrical Engineers and Electronics Engineer to become an integral member of the team and be tasked with design and development of efficient and robust motors, motor drives, and control systems for customer programs.

As the Electronics Engineer and the Electrical Engineer the main functions include:

System and component definition based on customer requirements.

Simulation and analysis of new and existing designs

Design and release of new systems and components

Work with suppliers, inspection and build to deliver prototype parts for test and development.

Work with test and development to formulate validation plans and feed the results back into component FMEAs.

Resolve component concerns

The ideal candidate will be degree qualified in electrical/electronics/mechatronics engineering or equivalent.
In addition the following would ideally be amongst the candidates skills:

Matlab/Simulink and Labview experience

Simulation using Saber an advantage

C++ programming an advantage.


The following experience is desirable:

Design for a volume production OEM; Design of motor drives and power electronics for mobile applications

Motor design in the 100kW range for mobile applications

Knowledge of relevant production processes, materials and manufacturing techniques

Knowledge of relevant design standards, quality systems and tools such as DFA, DFM and Design for low cost production.



The candidate should be self-motivated, capable of working autonomously as well as working as part of a team and adaptable to the constantly changing priorities.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Design Engineer - Oxfordshire (PBA-104959)

Apply now

Mechanical Design Engineer
Oxfordshire, England

Williams Hybrid Power are developing electric flywheel energy storage technology for mobile, hybrid and electric vehicle applications and are now looking for a full time Mechanical Design Engineer to become an integral member of the team and be tasked with delivering efficient and robust components and systems for new customer programmes.
As the Mechanical Design Engineer functions include:


Component schemes and first level analysis

Component FMEA

Complete and release detailed drawings

Work with suppliers, inspection and build to deliver prototype parts for test and development

Work with test and development to formulate validation plans and feed the results back into component FMEAs Resolve component concerns

The successful candidate will hold a relevant engineering degree or equivalent experience. Solid modelling and detail drafting capabilities are essential.

The following experience is desirable:
Experience of composites

ProE or NX

Design for a volume production OEM

Design of powertrain components for automotive or rail applications

Knowledge of relevant production processes, materials and assembly techniques

Knowledge of relevant quality systems and tools such as DFA, DFM and Design for low cost production.



The candidate will be self motivated, capable of working autonomously as well as working as part of a team and adaptable to the constantly changing priorities

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Project Development Engineer - Oxfordshire (PBA-104962)

Apply now

Project Development Engineer
Oxfordshire, England

Williams Hybrid Power are developing electric flywheel energy storage technology for mobile, hybrid and electric vehicle applications and are now looking for a full time Project Development Engineer to become an integral member of the team and be tasked with design and development of efficient and robust motors, motor drives, and control systems for customer programs.

The Project Development Engineer will be required to lead multiple customer-focused projects taking responsibility for ensuring validation of interface of energy storage device with customer systems.

Coordinating with design and engaging in development and ultimately ensuring that projects are delivered successfully.

Working closely with the Project Manager you will be actively engaged in engineering development work including the design of experiments to ensure the product is functioning to customer requirements.

The role may require travel to customer sites to ensure correct implementation of product to customer`s satisfaction.

As the Project Development Engineer you will possess an engineering degree (Electrical/Mechatronics) and have proven experience of engineering project delivery ideally within a high technology, engineering focused company.

Knowledge of Motor Drives and power electronics is advantageous.

Design of controls/supervisory systems such as MATLAB/Simulink and/or LabVIEW is desirable as is C++ computer programming capability.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Model Designer - Oxfordshire (PBA-104978)

Apply now

Model Designer
Oxfordshire, England

An outstanding opportunity to join one of the world s most iconic brands within motorsport.

A Senior Model Designer is required to support their Aerodynamic development programme for the current racing car and future projects.

As the Senior Model Designer you will be responsible for the team`s design output, influencing the design process and direction from initial concept to release of model components, ensuring that projects are developed on schedule and to the highest quality.

The successful applicant will hold an appropriate degree and be able to demonstrate extensive experience of free form surface/solid modelling using CAD software (preferably NX).


Must have excellent personal organisational and communication skills with a proven ability to work under pressure and to the highest levels of accuracy.


Formula One/Motorsport design experience is essential.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electronic Controls Engineer - Oxfordshire (PBA-105250)

Apply now

Electronic Controls Engineer
Oxfordshire, England

An outstanding opportunity to join one of the world s most iconic brands within motorsport.

They are now looking for an engineer to be responsible for the control of systems and/or third party equipment.

Applications requiring control include, but are not limited to, gearbox, differential, and KERS. The test locations range from rig and dyno testing, either at Grove or external sites, to track operations.

As the Electronic Controls Engineer you will provide control system support for overseas dyno tests with gearbox, differential, or KERS units under test.

Provide control system support for rig tests.

Manage and maintain the plant and control elements of various real-time simulation systems.

As the Electronic Controls Engineer you will be qualified to degree level or equivalent (2:1 or better preferred) in control, electronic or systems engineering, or a related, appropriate discipline.



Must have proven experience in a similar role and a demonstrable understanding of control systems and their implementation on digital electronics.

The successful candidate must also have an understanding of electrical and electronic systems including sensors, wiring and serial communications

Experience with real-time HIL emulation tools.

A clear practical knowledge of the behaviour and limitations of mechanical systems.

A willingness to work flexibly within a small team.



This role requires travel therefore you must be able and willing to travel, mostly within Europe, as and when required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Engineer - Didcot (PBA-105251)

Apply now

Mechanical Engineer
Didcot, Oxfordshire, England

An outstanding opportunity to join one of the world s most iconic brands within motorsport.

We are looking for a Mechanical Engineer to be responsible for mechanical engineering within the electronics department.

This would include design of extremely robust, lightweight enclosures for housing equipment on a car, and the design of special purpose fixtures for design and production test.

As the Mechanical Engineer you will have experience of working with electronics engineers on the design enclosures on electronic equipment.

Attend hardware design reviews.

Devise and oversee mechanical tests to prove the finished equipment is appropriate for use on the car.

To design fixtures for design and production test of electronics, sensors, and actuators.

The successful candidate will hold a degree or equivalent (2:1 or better preferred) in mechanical engineering, or a related, appropriate discipline.



Experience using 3D CAD systems, NX or CATIA is also desirable



The Mechanical Engineer must have a willingness to work flexibly within a small team.


Previous experience in F1 would be ideal.



This role requires travel, mainly within the UK therefore you must be able and willing to travel as and when required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Test Engineer - Oxfordshire (PBA-105254)

Apply now

Test Engineer
Oxfordshire, England

An outstanding opportunity to join one of the world s most iconic brands within motorsport.

They are now looking for a Test Engineer to take responisbility for test systems and to ensure that the equipment fitted to the car is robust in every respect, both hardware and software.
As the Test Engineer your responsibilities will include but are not limited to:
Work with design engineers to ensure new designs, both hardware and software, are testable.

Attend hardware design reviews.

Devise test methods in accordance with industry practice and our own requirements.

Liaise with external suppliers for the procurement of test equipment or services.

Management of the specification of externally supplied sensors used on the car, and implementation of measures to ensure their reliability.

Development and maintenance of measures to allow complete testing of sensors prior to car fitment.

As the Test Engineer you will be qualified to degree level or equivalent (2:1 or better preferred) in electronics or mechanical engineering, or a related, appropriate discipline.


Must have a willingness to work flexibly within a small team.

Previous experience in F1 would be ideal.



This role requires travel, mainly within the UK therefore you must be able and willing to travel as and when required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Project Manager - Hybrid Systems - Oxfordshire (PBA-106094)

Apply now

Project Manager - Hybrid Systems
Oxfordshire, England

This is an outstanding opportunity to provide services to one of the world s most iconic brands.

Williams Advanced Engineering, located at Williams F1 Headquarters in Oxfordshire, will provide Jaguar with a direct technology transfer of their engineering expertise for the new Jaguar C-X75 hybrid supercar.

They require a Project Manager to manage the design and release of hybrid components for the C-X75 Programme including:

Support component requirement definition, including capturing cascaded requirements from vehicle attribute and systems teams.

Supplier selection and management.

Project management through prototype builds to production, ensuring on time delivery according to programme milestones.

Manage quality documentations, including boundary diagram, FMEA, etc.

Support hazard analysis and functional safety analysis.

Manage packaging of components, including related EDS, cooling etc.

Report out status to project leaders.

Ensure timely communication of issues to project team.

Ensure alignment with core hybrid projects.

Leverage support from hybrid team members to support development.

Ideally degree qualified candidates will possess experience in component delivery, ideally related to Hybrid Systems components.

Excellent Interpersonal and communication skills.

A determination to succeed regardless of the roadblocks encountered during the Programme and flexibility to perform in a demanding environment.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Project Engineer - Product Line - Gillingham (PBA-105866)

Apply now

Project Engineer - Product Line
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Project Engineer - Product Line to work on either a permanent or contract basis and represent the purchasing function within the project team. Plan, coordinate and track purchasing activities to support attributed programs profit/loss, value stream, flawless launches objectives, in line with Lean Transformation objectives and strategies.

The Project Engineer will be responsible for tracking company global supply management`s performance to product development process timing, including sourcing and PPAP as well as to business case (new and current parts) on new programs. Provide input to project management system that tracks program timing. Complete purchased part risk assessment with Engineering and Supplier Quality input. Organize and lead Kick-off and Key-Stakeholders meetings. Conduct segmentation process on purchased material for all new programs. Develop readiness, quality, and sourcing strategies for each purchased component, including carry-over parts, in collaboration with project teams, supplier quality, and category buyers. Represent the purchasing function to all assigned project and product teams. Utilise all available tools (value stream mapping, VA/VE, etc.) early in product development to influence design and sourcing to reduce cost and improve quality. Responsible to communicate engineering changes on current parts to category buyers.

Candidates should be degree qualified in Engineering or Business and be a strong relationship builder with high integrity. Candidates will possess strong organisational, leadership, analytical and communication skills together with commitment to quality and flawless launch, lean and cost/profit planning .

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Analyst Technical - 22566 - £16.85 ph Ltd Co Rate - Coventry - 12 month contract (887085)

Apply now

Analyst Technical - 22566 - £16.85 ph Ltd Co Rate
Coventry, West Midlands, England
12 month contract

Analyst Technical - 22566
Whitley
Package: £16.85/hr (Ltd)

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

Require someone to support and work with engineers to interpret engineering intent into a manufacturing specification. To be the custodian of the product information for the business.

Skills Required:
- WERS
- BOM
- Able to read engineering drawings
- Engineering background
- Ford / JLR systems knowledge
- Degree preferred

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

BOM Target Analyst-22553-£15.52/hr Ltd Co - Liverpool - £15.52/hr Ltd Co. rate (887067)

Apply now

BOM Target Analyst-22553-£15.52/hr Ltd Co
Liverpool, Merseyside, England
£15.52/hr Ltd Co. rate

We are recruiting for a BOM Target Analyst on a 12-month contract based in Liverpool.

As BOM Target Analyst, you will be responsible for Inventory Management and Engineering Change Control. This will involve Bill of Material Management, Annual Inventory Control and associated processes. To develop and implement a standard cycle count process to correct stock records with the associated transactions in the MRP (Materials Requirement Planning) system. Identify root cause of stock discrepancies and work across functionally to develop and implement processes to eliminate them. To continually drive improvements in the accuracy and efficiency of the inventory management system. The ability to create and maintain and manipulate data efficiently and use 8D, DMAIC or other problem solving tools as appropriate. Engineering change will require introduction of new level parts and continuous management and reduction of surplus and obsolescent stocks.

Experience Required: Material Planning/Inventory Management/Engineering Change Control

Education Required: Degree Preferred

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Mechancial Technician 176603 - Cambridge - £20 per hour + 20/hr to 20/hr (NDE-106140)

Apply now

Mechancial Technician 176603
Cambridge, Cambridgeshire, England
£20 per hour + 20/hr to 20/hr

One of the worlds largest utilities, focused on delivering energy safely, reliably and efficiently.

They are currently recruiting for a Mechanical Technician for a contract role to work in a mobile capacity in the East Anglia area. The role is primarily responsible for the maintenance of several sites but will also involve installation works.
You will need to have prior industrial experience in a similar role and be comfortable working safely under your own initiative and under control of Permit systems. You will need to be able to assess your own work and complete written Risk Assements to support this.

Ideally you will have high pressure oil and gas experience along with high speed rotating machinery experience. The role requires someone with a good fault diagnostic capability and a minimum of ONC or CandG qualifications in Mechanical Engineering. You will need to have experience of working from drawings with little instruction and be a good team worker who is willing to assist staff from other trades as required.

The role is a contract position covering sites primarily at Cambridge and Kings Lynn, but also Bacton, Chelmsford and Diss. The position is paying up to 20 per hour and has an immediate start date.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Contract Automotive Electrical Engineer - Swindon - £30 - 35 per hour + Competitive market rate (KYU-105891)

Apply now

Contract Automotive Electrical Engineer
Swindon, Wiltshire, England
£30 - 35 per hour + Competitive market rate

Our client, one of the most successful vehicle manufacturers in the UK and is looking for 2 electrical engineers to provide technical capability for development, production and quality of automotive parts/systems.
* Design and development of electrical parts including electrical distribution, lighting, ICE, Navigation, Security systems, safety systems
*Cost, weight and technical feasibility analysis
*Drawing creation, modification, check and release
*Localised parts development and maturation
*Competitor parts analysis
*Confirmation of SPEC test reports and analysis of internal test results
*Market quality concern investigation and countermeasure instigation
*Monitor and research, industry trends of new electrical and IT technology
Ability to direct and oversee electrical system and part development
Research skills with ability to report information relating to electrical
Knowledge of telematics and connectivity useful
CAD experience (CATIA V5 usage) preferable
previous automotive OEM or Tier-1 experience is desirable
Competence in Japanese or a European language is desirable but not essential
Occasional overseas travel will be required

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Senior Software Engineer - Birmingham (KYU-103905)

Apply now

Senior Software Engineer
Birmingham, West Midlands, England

Our client is a major supplier of advanced electronic controls, wiring and body electrical systems to the automotive industry.
Electric steering systems are allowing significant advances to be made in vehicle functionality and driver comfort. You will make a major contribution to the development of high quality, robust software solutions using state of the art techniques to meet the stringent safety and performance demands of this rapidly expanding market.
As part of this team, you will develop your expertise in:

Control software development: Real time control of vehicle steering controls
Software Architecture development: Design and development software architecture and components in an Autosar environment
System Application: Tailoring software components to meet the needs of a global customer base and to ensure that legal, customer and company performance and safety standards are achieved
Safety Systems: Design and implementation of software to meet all relevant safety standards, including ISO26262
Customer management: To ensure that the development process runs smoothly, regular direct contact with the customer is essential, from defining system requirements to final performance sign-of
Essential:
Degree or equivalent qualification in an engineering discipline
Proven experience as a software design engineer
Real-time, embedded C skills with hands-on debugging experience
Good practical knowledge of embedded software development methods and tools
Understanding of the software development process for real-time, low cost, high volume systems

Desirable:
Automotive embedded software experience
UML Design experience
TargetLink experience
Experience of Autosar architectures
An appreciation of digital electronic hardwar

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Quality Systems Manager - West Sussex (KYU-106666)

Apply now

Quality Systems Manager
West Sussex, England

Client is a prestigious automotive manufacturer who is looking for a Quality Systems Manager to ensure they retain accreditation to ISO 9001:2008
To implement, maintain and improve a quality management system
Ensure legal and process requirements for the conformity of production
Control, plan and define requirements for conformity of production
Executive, plan track system/process audit
3 years Lead Auditor qualified to TS16949:2002
Extensive knowledge of business processes
Extensive knowledge of relevant standards (ISO TS 16949:2002, ISO 9001:2008, ISO 14001:2004)
Audit experience across the automotive industry
Basic German language an advantage
Competent PC Skills
Any particular qualifications required to do the job (if applicable):
Qualified to audit the relevant standards
Minimum 2 years auditing experience (24 days in 3 years)


Qualified to audit the relevant standards; Knowledge of BMW systems, Minimum 2 years auditing experience (24 days in 3 years)

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Maintenance Manager - Oxford (KYU-106661)

Apply now

Maintenance Manager
Oxford, Oxfordshire, England

This client offers a wide range of special products and services including security and authority vehicles and are looking for an experienced and proven Maintenance Manager to take on the following role:
Management of a multi skilled Maintenance Engineering team and Maintenance Planning organisation of 50+
Management of Maintenance strategies for new and existing facilities
Management of external maintenance and cleaning contracts
Support and lead problem solving activities with Maintenance engineering teams
Represent the assemble function in all issues pertaining to maintenance and technical engineering
Responsible for control on Budget, Availability , Energy usage, health and safety and environment
Key Accountabilities
To Manage Budget and Availability targets in-line with those defined within the corporate TMS ( target management system) process
To Achieve Problem resolution within established time frames and agreed criteria
To Define specific targets for individuals within the Maintenance organisation to ensure the overall achievement of departmental objectives
To develop and implement Maintenance tools and strategies to meet the increasing demands of production output
To have pro-active involvement with facility and product development to enhance volume achievement
Responsible for decision making associated with parts acquisition, planned maintenance activities, unplanned breakdown issues, health and safety and environment issues
Responsible for ensuring decisions reached are in-line with business objectives, budget constraints, and limit, where possible, impact on volume output
Qualifications and Skills
At least 3 years experience in a maintenance role in manufacturing/industrial environment.
leadership experience
Analytical and financial skills (budget responsibility) required.
Experience with a union workforce.
Strong communication and leadership skills are an absolute must. Ability to present ideas, work with various levels of the organisation and develop key strategies, key performance indices for the area of responsibility is essential.
Experience in Root Cause Failure Analysis (RCFA), Failure Modes and Effects Analysis (FMEA)
Degree in an Engineering discipline (i.e. mechanical and/or electronics, controls...)

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior CAD Interior Trim Engineer - BT190 - Coventry (KYU-102494)

Apply now

Senior CAD Interior Trim Engineer - BT190
Coventry, West Midlands, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

We are recruiting for Senior CAD Interior Trim Engineer, initially on a 6-month contract based in Coventry.
As Senior CAD Interior Trim Engineer, you will design and develop Catia V5 models for the Interior / Exterior Trim Department, this includes headlining, pillar trim, quarter trim and load space models on current / new projects.
* Store working models into structured database to support project reviews and DMU processes.
Applicants are required to be degree qualified or hold a similar qualification, plus:
* Strong numeracy and literacy skills
* Automotive experience is essential
* Good logic reasoning
* Be an effective team member contributing to improvements and high customer service.
* Demonstrates depth of knowledge in a relevant techical specialisty
* Experience in the `Team Centre` data management systems would be benefit.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Graduate Engineer - West Sussex - £14 per hour + �14 per hour (KYU-106556)

Apply now

Graduate Engineer
West Sussex, England
£14 per hour + ?14 per hour

Our client is a prestigious Automotive manufacturer who require two experienced Process Manufacturing Engineers to carry out a complete system audit within a vehicle assembly area for a 12-month fixed term contract.
Responsibilities -As an experienced Process Engineer you will be required to play a first line active role in the process optimisation of existing production lines.
You will utilise lean methodologies and manufacturing process techniques to analysis process flow.
Skills and Experience -Candidates should be educated to degree or HND/HNC level in related engineering disciplines.
Previous experience with working in vehicle assembly is preferential or related engineering field. Applicants must have a strong knowledge of lean tools (Kaizan, 5S, Ishikawa, Kanban etc) and standard process improvement techniques.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Quality Engineer - West Sussex (KYU-106110)

Apply now

Quality Engineer
West Sussex, England

Our client is a prestigious automotive manufacturer and is looking to recruit a Quality Engineer to develop and approve supplier`s processes and quality systems.
As Quality Engineer you will be responsible for closure of all supplier quality problems from pre series, production and after sales. You will have responsibility for delivering all project milestones as defined by the project timing plan using the systems and resources provided. You will be actively involved with the suppliers to deliver quality components and represent the client at the suppliers and defining quality and performance requirements
Experience in a parts quality or supplier development role, preferably in an automotive field. The ideal candidate will have knowledge of quality systems such as QS9000 or DIN/ISO 9001/ISO TS16949 and have the capability to audit manufacturing process and engineering experience to accurately asses and predict supplier conformance. Applicants will have the capacity to understand and relate to technical drawings and communicate effectively. You will be qualified to HNC/HND/Degree level or equivalent.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Dimensional Control Manager/Specialist - Oxford (KYU-106165)

Apply now

Dimensional Control Manager/Specialist
Oxford, Oxfordshire, England

Our client is a leading prestige automotive manufacture who is looking for a Dimensional Control Manager/Specialist. The role is to predict and challenge theoretical engineering concepts, through linear tolerance chains. Based in Oxford, you will be reponsible for complex analysis of geometric analysis problems within body interior and exterior trim environment with significant focus on gaps and profiles between panels. Liaising with cross-functional team of engineering, supplier quality and production.
Responsibility:
*Involvement with central projects
* Fully understand part and car alignments (3,2,1), together with RPS (Reference Point System)
* Organise data, in terms of theoretical analysis and actual data (Q-DAS which is a large storage database)
* Work cross functionally to control complete vehicle tolerance management including suppliers
* Have a strategic viewpoint of tolerance management
* Measurement planning for BIW and Trim and Final parts - particularly TandF where we need to maintain plant control via the suppliers
* FMK concept confirmation project phase
* Analyse theoretical tolerance chains with actual data
* Monitor project phases for gaps and profile achievement to group target
* 3DCS analysis (software tool that predicts tolerances extremes, and visualises the CAD models
An enthusiastic person with an Engineering background preferably educated to degree level. - A practical, hands-on person who enjoys working with cars. - Proficient in geometric integration processes including understanding of CMM reports, cubing processes and dimensional tolerance analysis. - Preferable (though not essential) to have good understanding of manufacturing processes in BIW and plastic injection moulding. - Good analytical skills applied to hardware and data. Proficient in the use of quality tools e.g. 5 Whys, Ishikawa, SPC.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Systems Engineer - West Midlands (KYU-106155)

Apply now

Systems Engineer
West Midlands, England

The Role
Recent business wins have generated a requirement for a systems engineer to support the systems engineering activities in core development, as well as global application projects. This is a relatively new discipline , so you will have opportunities to contribute to the development of systems engineering processes. You will work at different levels in the development cycle from capturing customer manufacturing, safety, and legislative requirements; performing system design and managing system testing activities to ensure compliance with requirements.
What you ll do

Assist with the elicitation of customer requirements documents including appropriate reviews, linking to TRW documents and identifying appropriate sub-system teams for dissemination
Support the generation of system design documents and requirements, including supporting reviews with appropriate sub-system teams
Assist with the generation of test procedures and review test results and test activities as required to ensure requirements at all levels are verified
Develop compliance matrices for application projects
Support Systems Engineering leads on application and core projects as required
Support and lead issue resolution activities as necessary
Support dFMEA and other safety analyses at a system level and ensuring continuity at a sub-system level
Evaluate product change requests from internal and external sources
What we are looking for

Essential:
2.1 or better degree in a relevant engineering discipline
Rigorous and positive approach to issue resolution
Demonstrated ability to work proactively
Knowledge of a range of engineering disciplines

Desirable:
Knowledge of design for safety critical systems
Knowledge of requirements management tools such as DOORS
Six-Sigma Green Belt certified

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Control Systems Engineer - West Midlands (KYU-106154)

Apply now

Control Systems Engineer
West Midlands, England

The Role

We are looking for a Control Systems Engineer to develop, specify and implement EPS control algorithms to deliver system level performance requirements. The role is ideally suited to an engineer with detailed understanding of control theory and application backed up with a sound knowledge of a range of engineering disciplines covering the electronics and mechanics, the sensing elements and the electrical actuation of the system. You will work closely with other team members on all aspects of control-related activities.
What you ll do
Develop robust control solutions for elements of the EPS system. Including the design of controller dynamics, specification of the controller design, supervision and sign-off of the controller implementation, verification of the controller function and documentation of the controller performance and the method of tune at vehicle level.
Review customer requirements, elicit or capture explanation information and generate necessary software requirements documents or specification analysis documents.
Define and issue software requirements specifications for control functions.
Develop implementations of control functions using embedded C and/or automatic code generation from controller models using tools such as Target link.
Investigate control performance issues, establish root cause and issue fault reports.
Support existing activities to produce, document and maintain Simulink Model Specification Documents of the EPS system and sub-systems. Generate test vectors for software analysis and validation. Monitor and review test results, and assist with performing system-level software testing and integration.
What we are looking for

Essential:
2.1 or better degree in a relevant engineering discipline
Excellent understanding of control techniques and methods
Either a higher degree in control engineering or lengthy experience in a range of control techniques and methods coupled with a pragmatic approach to real-world control engineering.
Broad experience with Matlab and Simulink. Experience of automatic code generation from models using tools such as Targetlink.
Experience of real-time embedded software (using C) and system engineering.
Practical experience in the fields of simulation, modelling of dynamic systems, controller design, discrete-time systems and fixed-point implementations.
Able to work flexibly in a multi-disciplinary team and on own initiative.
Experience in automotive control and vehicle-based electronically controlled systems. Vehicle chassis dynamics, electric drives or electro-mechanical systems will be an advantage.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Senior Software Systems Engineer - West Midlands (KYU-106153)

Apply now

Senior Software Systems Engineer
West Midlands, England

The Functional Integration team is responsible for the development and release of application software. This role will support this development, striving for customer delight with timely deliveries, novel system functions and high quality software. You will support the generation of software design document to appropriate software quality and safety standards, review software implementation and perform system level testing and issue resolution. As the post covers the interaction between software and hardware a broad understanding of a range of engineering disciplines, such as electronic hardware and control and software development for embedded systems, will be an advantage.
What you ll do

Assist with all aspects of the function development, testing and release for a specific application throughout the product lifecycle both internally and with customers and suppliers. (Overseas travel will be required from time to time)
Translation of customer specifications into software requirements documents for implementation by the software team
Working with the Control Team to develop, simulate, prototype and evaluate new algorithms
Working with the software implementers to ensure that all software deliverables meet requirements and standards
Provide support for system integration and testing, requiring development work on bench rigs and in vehicle
To contribute in the relevant areas of ECU and software safety analysis (e.g. dFMEA, FTA)
What we are looking for

Essential:
Able to work effectively within a team and with a strong positive attitude
2.1 or better degree in Electrical / Electronic Engineering or a related discipline
Understanding of software/systems design and experience of tools/methods
Knowledge of real-time embedded software (C language)

Desirable:
Self motivated and able to work without direct supervision
An understanding of analogue and digital electronic hardware
Matlab and/or Simulink experience, preferably with automatic target code generation
Knowledge of safety-critical applications and/or automotive component development and industrialization
Familiarity with SPICE or equivalent
Understanding of CAN-bus communications and diagnostics over CAN
Six-Sigma Green Belt certified

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Electrical Development Engineer - West Sussex (KYU-106085)

Apply now

Electrical Development Engineer
West Sussex, England

Our client is a leading prestigious automotive manufacturer based in the South and they are looking to recruit a Electrical Development Engineer to support the current engineering of production vehicles new vehicle feature/system development.
Primary responsibilities:
*Lead the electrical design/development process
*Knowledge of automotive bus communication systems (i.e. CAN, MOST)
*Troubleshooting problems
*Verification and steering of engineering change
* Line trial support
*Re-work co-ordination
* Interface with process partners
Qualifications and Skills
*Minimum of HND/Degree in an Electrical/Electronic discipline
*Automotive engineering experience
*Harness design and development knowledge a benefit
*IT competence essential* Good communication skills
*German language (verbal and written) would be useful but not essential
*Foreign travel would be required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Sourcing Leader / Buyer - Halifax - Benefits (887011)

Apply now

Sourcing Leader / Buyer
Halifax, West Yorkshire, England
Benefits

Our client is a leader in design, manufacture and support of world leading turbo chargers and associated equipment.

 
Due to growth plans a position of Sourcing Manager to cover maternity leave (6-9months), and as such we welcome applicants who want a fresh challenge, and meet the requirements below

 

• Primary contact for supplier interaction and negotiation.
• Manage product costs and lead times.
• Maintain effective measures and support improvement initiatives.
• Develop supplier relationships.
• Drive 100% on time delivery.
• Ensure adequate and flexible capacity in place to support business needs.
• Work towards zero defects with supply base.
• Identify Supplier risk.
• Maintain appropriate plant interaction. 

 

• Clear understanding of Supply chain functions.
• Ability to communicate at all levels.
• Analytical competence (cost models, data analysis etc).

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechancial Technician 176603 - Cambridge - £20 per hour + 20/hr to 20/hr (NDE-106140)

Apply now

Mechancial Technician 176603
Cambridge, Cambridgeshire, England
£20 per hour + 20/hr to 20/hr

One of the worlds largest utilities, focused on delivering energy safely, reliably and efficiently.

They are currently recruiting for a Mechanical Technician for a contract role to work in a mobile capacity in the East Anglia area. The role is primarily responsible for the maintenance of several sites but will also involve installation works.
You will need to have prior industrial experience in a similar role and be comfortable working safely under your own initiative and under control of Permit systems. You will need to be able to assess your own work and complete written Risk Assements to support this.

Ideally you will have high pressure oil and gas experience along with high speed rotating machinery experience. The role requires someone with a good fault diagnostic capability and a minimum of ONC or CandG qualifications in Mechanical Engineering. You will need to have experience of working from drawings with little instruction and be a good team worker who is willing to assist staff from other trades as required.

The role is a contract position covering sites primarily at Cambridge and Kings Lynn, but also Bacton, Chelmsford and Diss. The position is paying up to 20 per hour and has an immediate start date.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Metallurgist - Barnsley - £30k - 40k per year (JDW-103092)

Apply now

Metallurgist
Barnsley, South Yorkshire, England
£30k - 40k per year

My client a market leading manufacturing with a global customer base require an experienced Metallurgist to join their established management team.

The post holder will become part of the senior management team will help make strategic decisions within the business

Job Description
-Will be responsible for all Metallurgical and technical matters within the company
-Work with production team to maximise efficiencies within the manufacturing process and also look at new processes to development product base.
-Prepare detailed technical reports
-Enquiry and contract review to determine manufacturing processes and capabilities
-Responsible for both quality and Health and Safety
-Customer liaison to resolve any issues, including visits to customer sites

Required Experience
-Candidates should be degree educated in Metallurgy or Materials Science, or relevant industry experience.
-Ideally background would include both weld procedures and machined components.
-Understanding of quality procedures in a manufacturing environment
-Candidates should have experience working with a variety of metals
-Candidates should have understanding of quality systems within a manufacturing environment
-Understanding of inspection procedures
-Be able to work as part of a team and also lead teams on technical projects

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Junior Quality Engineer - West Midlands - £18K-£20K d.o.e (LHI-106770)

Apply now

Junior Quality Engineer
West Midlands, England
£18K-£20K d.o.e

Junior Quality Engineer required in Wolverhampton for a leading lamination manufacturing facility. Reporting to the Technical Manager this role will be developing quality system applications to include; Drawing Control, Measurement techniques (including CMM) and KPI report writing. You will also co-ordinate quality activities around scrap recoding and improvement.
The key responsibilities for this role will include:

Data, entry, scrap recording and analysis.
Coordinating organisations drawing revison control.
Supporting effective contract reveiw.
KPI report writting.
CMM prgramming and measurement, IRIS and FAIR
Improve the present production processes.
Qualifications and Experience:

Ideally our client is looking for an applicant with either a Quality or Engineering related qualification. You will have good analytical skills and should be detail-oriented with ability to deal with complex information. Experience of all or some of the following would be viewed advantageously:
Writing technical reports
Knowledge of CMM Operation/Programming
Understanding ISO 9001
AutoCAD

In return our client can offer on-going training and career development within this exciting time of growth.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.