Quality Compliance Analyst/Auditor-Utilities: £200/day - West Midlands - £200/day Ltd Co. rate (889812)

Apply now

Quality Compliance Analyst/Auditor-Utilities: £200/day
West Midlands, England
£200/day Ltd Co. rate

Quality Compliance Analyst/Auditor position on a 3 month contract for a major regional Water company. There are 3 roles available based in Derby, Stafford and Coventry.

The role focuses on the design and implemention of an Audit/Quality programme with which to manage commercial contracts between our client and the external companies that assist in managing the Sewerage network.

As Quality Compliance Analyst/Auditor, you will be responsible for the development and execution of a range of Quality Assurance activities directly supporting the Waste Water Service Delivery teams by the evaluation and quality auditing of suppliers. The job holder will oversee the development of the audit scope and criteria to produce a Quality Assurance programme.

Candidates must have experience of:

- Working within an operational service delivery environment
- Conducting QA process audits and the development of quality management processes
- Procurement processes is desirable
- Analysing data from multiple sources with the ability to synthesise this data and make structured decisions
- Distilling a complex range of data and responses into an accurate, structured and coherent report with clear definition of non-conformance and action plans
- Being strong and robust under pressure and able to make key decisions on the spot
- Exception handling within a managed service delivery environment.
- Developing policy/processes in a service delivery environment to overcome ongoing issues as they arise.
- Design, implement and manage a robust audit programme to continually monitor contractor compliance against contractual and KPI obligations
- Identify and create specific and appropriate audit criteria and documentation relevant to each schedule/job type
- Plan, conduct and manage audits for all contract partners, ensuring consistency and best practice throughout
- Compliance and satisfaction within contract partner agreements by creating and delivering comprehensive reports clearly defining deficiencies, concerns and other feedback identified during the audit process.
- Analyse and present audit findings and make recommendations to contract partners.
- Identify and justify key issues and improvement opportunities to ensure continuous improvement and process development

The contract rate for this position is £200/day depending on experience. If this role is of interest to you please forward your CV prior to 24th October 2012. Applicants must hold a Lead Auditor qualification or equivalent experience of Quality Management.

To discuss this position in more detail, please contact Alec Price at Jonathan Lee on 01384 446126.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principal Engineer, Electronics Design - Pitstone, Upto£43k - Pitstone (889804)

Apply now

Principal Engineer, Electronics Design - Pitstone, Upto£43k
Pitstone, Buckinghamshire, England

Our Client is designing systems for aircraft of the future, providing actuator drive and power control electronics that help our customers surpass the performance standards of the best aircraft flying today.

As a result of more new design wins, they are seeking to further expand their electronics hardware design team and require Principal Engineer - Electronics Design based in Buckinghamshire.

Applying industry leading design and management techniques, our Client is creating outstanding aircraft electronics, bringing reliability, high  performance, maintainability and enhanced fuel economy to our customers.

They are seeking experienced engineers to execute detailed design of high performance analogue and digital hardware, typically working in teams of two to five hardware engineers within a total team of up to 50 people at their modern engineering base.  The teams are responsible for carrying out all the tasks required to deliver a system or subsystem on time and to the required quality standards.

Engineers will bring good knowledge of modern SMT electronic components, an understanding of when custom components can be incorporated with advantage, and the ability to deploy appropriate software analysis tools as required.

The teams also need to bring sound EMC design skills and a good appreciation of the factors that need to be managed to deliver the size, weight and reliability goals our customers set. 
Engineers will deliver the documentation for professional or military systems that give customers and airworthiness authorities  appropriate assurance that the design has been professionally executed and proven.

Our senior engineers assist project managers with estimating work and ensure they follow through on programmes and ensure timely completion.  You should be prepared to share your expertise and help less experienced staff develop their skills.

Basic Qualifications:

• Strong Hardware Electronic Engineering skills

• A degree level or HND qualification in Engineering or equivalent experience.  Experience giving technical guidance to other team members and resources.

• A proactive style, team spirit, high energy level, and positive outlook.

• Demonstrable Time Management skills

• Ability to multi task and cope with a degree of pressure in a professional product development environment.

In addition;

• Work experience in a similar or related industry

• Knowledge of or experience with one or more of software tools: PSPICE (circuit simulation), Saber (circuit simulation), Mathcad, Simulink, Matlab.

• An understanding of electrical generator and brushless DC motor drive operation.

• Understanding of design for EMC.

• Knowledge of DO254 or related standards.

If interested, please let us know on an URGENT basis.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer-Auto-Leicester: Contract Rates - Leicester (887047)

Apply now

Design Engineer-Auto-Leicester: Contract Rates
Leicester, Leicestershire, England

We are recruiting for a Design Engineer on a 12-month contract based in Leicester.

As Design Engineer, you will have a varied and exciting role creating new designs from concept through to detailed design ensuring the parts are validated and meet the functional requirements.

You will be responsible for the production release of the parts and expected to work with suppliers to ensure the parts can be manufactured and meet the cost and quality targets.

The successful applicant will need to be flexible and be able to work on multiple areas of the machine i.e. structural fabrications, non-metallic components and cab interior.

Qualifications:
* Machine engineering design experience.
* Computer literate with Pro-E CAD engineering skills
* Experience in designing structural fabrications and non-metallic components.
* Knowledge and experience of problem solving analysis.
* Knowledge of Engineering process's, drawing standards, specifications, and Teamcentre workflow is desirable.
* Experience of Off highway equipment or other heavy machinery
* Ability to self direct but also work effectively in a diverse team environment.
* Engineering / Science Degree or equivalent industry experience

If you require further information regarding this position, please contact Alec Price on 01384 446126.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Chassis Damping Software Engineer - 23415 - £31.44 Ltd co - Coventry - £31.40 - 31.40 per hour (889810)

Apply now

Chassis Damping Software Engineer - 23415 - £31.44 Ltd co
Coventry, West Midlands, England
£31.40 - 31.40 per hour

A Chassis Damping Software Engineer with Chassis electronics knowledge is required to work within Electrical Engineering on contract for our Client, an OEM specialising in luxury and SUV/Off road vehicles.
The position will be based in the West Midlands.

Positions description:
-The Vehicle Dynamic Systems team, within Chassis electronics, delivers in-house controls and software for damping, air suspension, active roll bars and terrain response. The role is to coordinate work, relating to the delivery of software and hardware to the vehicle programmes.
-Working with system engineers to ensure timely delivery of software and hardware requirements and test plans.

Experience / education required:
-Software lifecycle knowledge.
-Previous experience in the automotive industry including project management , release, and validation / sign-off activities.
-Degree in Electronics, Software, Automotive / Aerospace engineering or similar subject.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Please contact Tina Field at Jonathan Lee Recruitment on 01268 889259 to discuss further.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Vehicle Dynamics Engineer - Motorsport - Oxfordshire (888886)

Apply now

Vehicle Dynamics Engineer - Motorsport
Oxfordshire, England

Motorsport F1 Vehicle Dynamics Engineer – Motorsport – Oxfordshire - £Neg

A Vehicle Dynamics Engineer is required to join one of the World’s most iconic F1 and Advanced Engineering brands.

The Motorsport F1 Vehicle Dynamics Engineer will be responsible for chassis development from suspension design concept to attribute sign-off including:

Vehicle dynamics subjective evaluation, benchmarking and target setting
Component / geometry optimization (spring, dampers, anti-roll bars, bushes, tyres, steering system) to achieve dynamics attribute targets for steering, ride and handling
Calibration of electronically controlled chassis systems: e.g. steering, active dampers
Liaison with design engineers / suppliers and other development engineer within Chassis Systems
Vehicle development planning / management to ensure successful delivery
Test activity coordination
Vehicle dynamics problem resolution
Technical report writing

Skills / Experience Required
Proven capability of successfully developing chassis specifications to meet / exceed project expectations
Good understanding of vehicle dynamics theory
Formal driver training qualifications from Industry recognized organization / OEM
Extensive limit handling driving experience
Ability to clearly report, present and, generally, communicate results
Ability to adapt and overcome setbacks in development environment
Ability to self-motivate to achieve the best possible result with minimum supervision
Flexible attitude to working hours when required meeting project deliverables

If you’re interested in applying for the role please send you’re CV to joe.wadman@jonlee.co.uk or Call 01268 889 263 for more details.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electrical Test Verification Planner - 23366 - £30.20 Ltd Co - Coventry - £30.20 - 30.20 per hour (889807)

Apply now

Electrical Test Verification Planner - 23366 - £30.20 Ltd Co
Coventry, West Midlands, England
£30.20 - 30.20 per hour

A Electrical Test Verification Planner with Vehicle engineering is required to work within Electrical Engineering on contract for our Client, an OEM specialising in luxury and SUV/Off road vehicles.

The position will be based in the West Midlands.

Positions description:
-Working with Vehicle engineering to manage the vehicle allocation plans according to the requirement specified by the electrical engineers. The plans will need to be defined also and the vehicle specification to support the DV requirements.
-Working with program module leaders, integration leaders and program leaders to report on the usage and reviewing plans weekly and escalation of any issues.
-Monitoring the Vehicle utilisation tracker.

Experience / education required:
-Project Management skills
-Working in a challenging environment and working to deadlines to achieve objectives Planning and basic technical understanding of vehicle operations and functions.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Please contact Tina Field at Jonathan Lee Recruitment on 01268 889259 to discuss further.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Brakes Development Engineer - Motorsport - Oxford (888803)

Apply now

Brakes Development Engineer - Motorsport
Oxford, Oxfordshire, England

Motorsport and Advanced Engineering Brakes Development Engineer  – Oxfordshire - £Neg

Brakes Development Engineer required to join one of the Worlds most iconic brands initially on a 6 month contract basis before the
opportunity of an extension or permanent contract can be negotiated.

Advanced Engineering will provide direct technology transfer of their engineering expertise for the new hybrid supercar; they are seeking a Brakes Development Engineer to support this project and those that follow. This is a great opportunity to be part of the future and put your mark
on the new era of supercar.

The successful applicant will have experience of:

Proven capability of successfully developing high performance vehicle braking systems in terms of performance and refinement.

High level of driving ability and subjective assessment skills.

Formal driver training qualifications from Industry
recognized organization / OEM.

Familiarity with chassis system test instrumentation, data-logging and data-processing

Ability to adapt and overcome setbacks in development environment

Ability to self-motivate to achieve the best possible result with minimum supervision

CAE brake development (performance and thermal modelling)

Brake performance / refinement rig test / optimization

Carbon ceramic brake development

Regenerative brake integration / development

Slip control system development

Must have a flexible attitude to working hours when required to meet project deliverables. If you would like to be put forward then
please send your CV to joe.wadman@jonlee.co.uk or give Joe a call on 01268 889263

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Quality Engineer - Merseyside (106208-2)

Apply now

Quality Engineer
Merseyside, England

Quality Engineer – Automotive – North West – excellent salary plus benefits

A Quality Engineer with proven experience in a relevant industry is required to work for a market leader in luxury high volume vehicles.  This role is part of an exciting expansion of the team in order to meet an increase in demand.

As Quality Engineer you will

* Be instrumental in driving forward the quality of the vehicles

* Help to manage any quality issues around the quality of parts supplied during the build process or fitted prior to sale.

* Work with the manufacturing and engineering departments, and directly with suppliers, to identify root causes of problems, and ensure solutions are implemented.

The salary for this role is negotiable, depending on experience, plus benefits.  You will have a Degree level qualification and proven experience of lean / continuous improvement tools and practical problem solving in a quality focussed environment. You will be expected to utilise problem solving documents and technical tools such as SPC, FMEAs and control plans.

To discuss the Quality Engineer role please contact Sarah Gilbert at Jonathan Lee Recruitment on 01384 397555.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Production Engineer - Merseyside (106208)

Apply now

Production Engineer
Merseyside, England

Production / Manufacturing Engineer – Automotive – North West – excellent salary plus benefits

A Production / Manufacturing Engineer with proven experience in a relevant industry is required to work for a market leader in luxury and
high-volume vehicles.  This role is part of an exciting expansion of the team in order to meet an increase in demand.

You will be involved with designing, developing and implementing manufacturing solutions, and will have experience with:

* Vehicle manufacturing and launch experience

* Process authoring Tool simulation and virtual toolsets

* Catia V5

The salary for this role is circa £35k, depending on experience, plus a benefits package.  You will be educated to degree level and have proven experience of lean / continuous improvement tools and problem solving skills.

To discuss the Production / Manufacturing Engineer role, please contact Sarah Gilbert at Jonathan Lee Recruitment on 01384 397555.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Maintenance Engineer - Birmingham (887453)

Apply now

Maintenance Engineer
Birmingham, West Midlands, England

Maintenance Engineer – Automotive – West Midlands – Excellent salary plus benefits

A Maintenance Engineer with working knowledge of plant engineering and body construction activities is required to work for a market
leader in luxury and high end vehicles based in the West Midlands.  This role is part of an expansion of the team to meet an increase in demand.

You must have experience with:

* ABB S4 robots and PLCs

* Knowledge of COSHH and ergonomics

* Lean manufacturing techniques, and knowledge of six sigma would be advantageous

 

The salary for this role is negotiable, depending on experience, plus benefits.  You will be educated to degree level, and willing to be flexible with working hours.

To discuss the Maintenance Engineer role, please contact Sarah Gilbert at Jonathan Lee Recruitment on 01384 397555.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Industrial Engineer - Coventry - £32k per year (888790)

Apply now

Industrial Engineer
Coventry, West Midlands, England
£32k per year

Industrial Engineer – Automotive – West Midlands – Circa £32k

An Industrial Engineer is required to work for a world class manufacturer and supplier to the global automotive industry. 
The role has come about because of expansion of the team in response to an increase in demand.

You will have experience of:

* Statistical methods to determine manufacturing processes, staff requirements and production standards

* Draft and design layout of equipment, materials and workspace to illustrate maximum efficiency

* Review production schedules, engineering specifications, orders and related information to obtain knowledge if manufacturing methods, procedures and activities

* Knowledge of raw materials, production processes, quality control and costs

* Good knowledge of lean manufacturing techniques

 

The salary for this role is flexible for the right candidate and dependent on experience.  If you would like to discuss this role in more detail, please contact Sarah Gilbert at Jonathan Lee Recruitment on 01384 397555

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer - CATIA / CAD - Motorport - £Rate Neg - Oxfordshire (889136)

Apply now

Design Engineer - CATIA / CAD - Motorport - £Rate Neg
Oxfordshire, England

Design Engineer - CATIAand CAD - Advanced Engineering / Motorsport - Contract - £Rate Negotiable

A Contract Design Engineer with a background in Automotive, Aerospace and/or Motorsport is required for an initial 6 month period for this advanced engineering motorsport company based in Oxfordshire.

As the Design Engineer you will work on various production designs for high performance vehicle projects using CATIA V5. Must be capable of freeform surfacing, 3D modelling, drafting, teamcentre cad data management. PowerPoint presentations might be required. Jig & Fixture design using rapid prototypes.

Must be proactive in liaising with the build technicians and ensuring that you are efficient in solving problems which may lead up to complete redesigns – this needs to be done quickly and efficiently to meet strict deadlines.

Regular contact with suppliers is required regarding the design and manufacturing process of the project.

Need to be able to integrate into the team quickly and have a friendly nature.
Flexibility is required on working hours depending on the project deadlines.

This is an excellent opportunity to work for an iconic motorsport company.

Please contact Bev Strawford for more information on 01268 889254 as soon as possible.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

CAD Engineer - SOLIDWORKS - Automotive - £Neg - Gillingham (889792)

Apply now

CAD Engineer - SOLIDWORKS - Automotive - £Neg
Gillingham, Kent, England

An exciting opportunity has arisen for a CAD Engineer within a world leading automotive company, to produce Solidworks models and detailed drawings for components used in next generation common rail [CR] pumps and injectors. This includes both ‘clean sheet’ solutions as well as the re-use of features from existing designs.    

You will be responsible for:
•Detailing and checking of component drawings for current and future applications of fuel pumps/injectors for the automotive market
•Assure GD&T and other drafting standards are applied to new component drawings
•Assist the Principal Design Engineer with design changes that assure the programme meets cost, design for manufacture, performance and timing goals
•Assist the building / maintenance of parts lists (BOMs) for intended products
•Assist the flawless Launch for all new product programmes
•Facilitate fast and accurate two-way communication with development, purchasing and process engineers to assure robust design and flawless launch objectives

The successful candidate will hold a minimum HNC in mechanical engineering or equivalent and must understand basic physics.
SOLIDWORKS (or similar) modelling and draughting experience.
Knowledge of Teamcenter PDM an advantage (but training will be provided).
Proven experience in design draughting in a production-type environment with good knowledge of GD&T and other drafting standards.     

Must be able and willing to travel as some short travel for training may be required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electrical Engineering Programme Planner - 23432 - £30.20 Ltd Co - Gaydon - £30.20 - 30.20 per hour (889782)

Apply now

Electrical Engineering Programme Planner - 23432 - £30.20 Ltd Co
Gaydon, Warwickshire, England
£30.20 - 30.20 per hour

A Electrical Engineering Programme Planner is required to work within Electrical Engineering on contract for our Client, an OEM specialising in luxury and SUV/Off road vehicles.
The position will be based in the West Midlands.

Positions description:
-Develop high level and detailed project timing plan in line with GPDS which can be used to track progress of the programme from early concept through to the Gateway.
-Identify areas of risk within plans, and develop contingency actions.
-Assist in the co-ordination of the projects including setting up the agendas of weekly Senior management and department reviews.
-Compile management reports and associated metrics to support senior management reviews.
-Co-ordinate and drive the team to manage the completion for the programme milestones.

Experience / education required:
-Coordinate the Electrical Product definition work with other Centres of Competences, Vehicle Engineering, Advanced Manufacturing Engineering and OEM core Electrical design teams.
-Coordinate with the EE Systems Strategy and Business case development team for programme competitor benchmarking and gain a good understanding of competitor best practice.
-Facilitate the transition of the programme from Advanced Electrical Engineering to the core Electrical department.
-Consider whole lifecycle including bill of process, bill of design, service (diagnostics, upgradeable systems etc)
-Good analytical / reconciliation skills with particular attention to the detail.
-Educated to degree level in an Engineering or Business related subject.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Please contact Tina Field at Jonathan Lee Recruitment on 01268 889259 to discuss further.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Harness Launch Engineer - 23414 - £30.20 Ltd Co - Solihull - £30.20 - 30.20 per hour (889773)

Apply now

Harness Launch Engineer - 23414 - £30.20 Ltd Co
Solihull, West Midlands, England
£30.20 - 30.20 per hour

Harness Launch Engineer - Automotive - West Midlands - £30.20 - 23414
A launch engineer is required for a leading manufacturer of luxury and off-road vehicles based in Solihull in the West Midlands. You will have proven capabilities as a launch engineer with significant experience of wire harnessing. It is also essential that you hold a degree , and have a solid engineering background ideally with knowledge of:

-Launch and line support.
-Wire harnessing.
-Line support and build issue resolution.

In return for your experience, this role offers an attractive contract rate of £30.20 per hour.

If you are a launch engineer with an interest in this role and skills within harnessing then please contact Tina Field at Jonathan Lee Recruitment as soon as possible on 01268 889266

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Electrical Circuit Design Engineer - 23355 - £30.19 Ltd Co - Coventry - £30.20 - 30.20 per hour (889730)

Apply now

Electrical Circuit Design Engineer - 23355 - £30.19 Ltd Co
Coventry, West Midlands, England
£30.20 - 30.20 per hour

A Electrical Circuit Design Engineer who is proficient in the VeSys circuit design is required to work within electrical engineering on contract for our Client, an OEM specialising in luxury and SUV/Off road vehicles.

The position will be based in the West Midlands.

Positions description:
To produce an accurate set of vehicle circuits, with the correct wire attributes and connector pin outs in time for release and incorporation into the harnesses, using VeSys and EDS Enterprise CAD tools. Reviewing component DT"s and applying circuit design rules to deliver a quality design. Run circuit audits to validate information supplied and perform circuit analysis techniques for DC characteristic (Short circuit/Voltdrop) also fusing and grounding architecture, and involved in resolving system issues, using design rule checking and SDS"s. Create physical test plans and release schematics for downstream testing and validation.

Experience / education required:
-Proven project and time management skills and able to work to a high standard with minimum supervision.
-Knowledge of EFDVS and circuit SDS requirements.
-Proficient in the VeSys circuit design.
-Proficient in the VeSys circuit analysis tools and techniques.
-Tools process and modelling knowledge of spice or equivalent.
-Detailed experience and Knowledge of circuit analysis principles.
-Degree in an Engineering or related discipline preferred.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Please contact Tina Field at Jonathan Lee Recruitment on 01268 889259 to discuss further.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Senior Automotive In-Sourcing Manager - 23417 - £45.60 Ltd Co - Coventry - £45.60 - 45.60 per year (889761)

Apply now

Senior Automotive In-Sourcing Manager - 23417 - £45.60 Ltd Co
Coventry, West Midlands, England
£45.60 - 45.60 per year

An "In-sourcing" Special Vehicle project manager is required to support a major new development within a market leading design/manufacture of high end luxury/off-road vehicles based in the West Midlands.br
This role is part of an exciting new expansion of the team to meet increasing demands with the launch of future models within the Special Vehicle division.

You will assume Lead Project Management responsibility for the entire in-sourcing project including designing and executing the transfer plan from our current outsource organisation to in-house operation and will have:

-Responsibility for IT/systems development.
Procurement and Purchasing.
-Team induction, including training, guidance and development of team.
-Responsibility for IT/systems development Procurement and Purchasing.

You must have the following experience:
-Deep knowledge of the principles and processes involved in logistics management.
-Proven and successful Project Management experience in an Aftersales environment.
-High personal motivation and desire to succeed.
-Self-starter: takes the initiative and does not need to be led Is pro-active:
-Able to drive positive change in the team and department operations for maximum impac.
- Highly numerate - understands and utilises mathematical formulas,
-Able to think laterally and solve complex problems.
-Strong personal presence - possesses a natural authority that is not simply a function of age. 
-Have an established network of industry contacts to ensure alertness to new concepts and strategies.
-Understanding of current economic, technological and political factors that drive change in the automotive design and Aftersales environment.
-Ability to interpret these factors to create strategies for Parts and Accessories Inventory to deliver a competitive edge for our Client.
-Fluent English (written and spoken)
-Degree educated with further postgraduate qualifications an advantage:

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this "In-sourcing" Special Vehicle project manager role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Production Controller - Coleshill - £25k - 30.5k per year + Bonus + Car Scheme + Final Salary Pension + Healthcare (KYU-Prod-111012)

Apply now

Production Controller
Commutable from Birmingham, Coventry, Leicester
£25k - 30.5k per year + Bonus + Car Scheme + Final Salary Pension + Healthcare

PRODUCTION CONTROLLER – AUTOMOTIVE – COLESHILL – 25,000pa - £30,500pa + BENEFITS

 

A Production Controller is required with experience of planning and co-ordinating an automotive manufacturing facility to meet the dispatch requirements of their customer requirements.  The Production Controller will be responsible for ensuring that all KPIs are met for planned dispatch, and schedules and build data are up-to-date and accurate. We are recruiting this role for a leading automotive organisation based in Coleshill, West Midlands. We are recruiting the position due to increased production demands and investment that has been made to the plant to support new model builds.

You must have experience with:

* Production Planning in a manufacturing environment.

* Good working  knowledge of MRP & IT systems, ideally SAP.

* Excellent analytical skills coupled with project/process development skills.

* Effective communication and an excellent initiative.

* Candidates should possess ad Engineering/Logistics related qualification to HNC level.

The salary for this role is £25,000pa - £30,500pa + Bonus + Pension + Company Car Scheme + Healthcare. The client is looking to interview candidates as soon as possible for a January 2013 start.

Please contact Katharine Bignell at Jonathan Lee Recruitment on 01384 397 555 to discuss further

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Materials analyst - Gloucestershire - £20k - 30k per year (900000)

Apply now

Materials analyst
Gloucestershire, England
£20k - 30k per year

6 Month + Contract 

Manage and take full responsibility for the stockholding of a range of parts and suppliers in accordance with the Company’s budgets, Logistics, supply chain, warehousing and customer service requirements.

Operate Stock Cover system, verifying and prioritising stock against percentage cover, usage and Customer Back Order Requirements.
Escalate parts using the following guidelines against Safety Stock requirements. The safety stock refers to stock in the warehouse. Lineside stock is not part of the safety stock. Failure to escalate supply issues in line with this procedure could cause a significant risk to the company.

General Requirements:
• Worked in a Materials analyst / Logistics or Supply chain environment 

• Develop and maintain the Company stock management policies and procedures in strict accordance with the Company’s quality, environment, health and safety policies and procedures.

• Lead the resolution of Logistics and supply chain Queries for your suppliers.

• Administer supplier returns, supplier queries and the supplier recharge procedure.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Test Engineer - Automotive - Kent - £Neg - Kent (889787)

Apply now

Test Engineer - Automotive - Kent - £Neg
Kent, England

A degree qualified Test Engineer is required for an excellent opporrtunity with this leading automotive company based in Kent.

As the Test Engineer you will interpret test programmes and perform specified tests on engines and vehicles, using computerised engine test dynamometers, chassis dynamometers, cold rooms and emissions equipment.

Responsibilities will be drawn from the following:
-Specifying engine installation.
-Instrumentation requirements - undertaking tests, preparing test data and graphs.
-Calibrating and maintaining test equipment.
-Instrumentation and to diagnose and rectify faults with engine test equipment

The successful applicant will hold a degree in a relevant engineering discipline, or served a recognised engineering apprenticeship with a high level of relevant experience

Must have sound knowledge of engines, fuel injection systems and test procedures and the ability to work in a flexible manner.
Must be computer literate, with MS office experience.
The ability to systematically work through problems on your own initiative.

Existing hours of work comprise a weekly total of 37 hours on either day shift or a double day shift.
Day Shift: 08:00 - 16:30hrs Mon to Thurs and 08:00 - 13:00hrs Fri
Early Shift: 06:00 - 14:00hrs Mon to Thurs and 06:00 - 13:30hrs Fri
Late Shift: 14:00 - 22:00hrs Mon to Thurs and 13:00 - 20:30hrs Fri

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

STOREMAN - Leicester (889780)

Apply now

STOREMAN
Leicester, Leicestershire, England

STOREMAN - ENGINEERING - AEROSPACE - HINCKLEY - LEICESTERSHIRE

I"m looking for an experienced Storeman to join an organisation who produce machined components for the aero-engine and aerospace Industries and is commutable from Nuneaton, Tamworth and Leicester.

The role will initially begin on a 3 month contract evolving into a permanent role.

 
Skills required:

                       - A basic understanding of Engineering
                       - Knowledge of Tooling
                       - Good organisational skills

 
Interviews will commence with immediate effect with a view to begin ASAP.

 
This is a fantastic opportunity to be part of company who holds the highest levels of Aerospace approval, including AS9100, as well as national ISO approvals for Environmental Control and Health and Safety

 
For more information on the role of Storeman please contact Neil Cayley at Jonathan Lee Recruitment on 01384 446114

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

CNC Millers/Turners - Contract or Perm - Herts - £Rate Neg - Hertfordshire (889463)

Apply now

CNC Millers/Turners - Contract or Perm - Herts - £Rate Neg
Hitchin Hertfordshire

Do you have CNC experience using FANUC or HEIDENHEIN working on BRIDGEPORT machines then this could be your next role!! 

Due to continued expansion of this Hertfordshire based engineering company, there are a number of requirements for CNC Millers/Turners to work on either a permanent or contract or temp to perm basis.

As the CNC Miller/Turner you must have experience of:

• Using HEIDENHEIN or FANUC Controls
• Operating CNC mills and lathes using FANUC controls

This is an excellent opportunity for experienced CNC professionals to work for a forward thinking company.

A Referral Scheme is in place for candidates that are recommended and placed.  Terms and conditions apply. For more information on these exciting opportunities please contact Justin Wainwright on 01268 889267

 

 

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Application Engineer - Basildon (888511)

Apply now

Application Engineer
Basildon, Essex, England

Application Engineer - Automotive - Basildon, Essex - £salary Excellent + benefits

A degree qualified Application Engineer is required for the first automotive supplier to offer its customers a range of electric superchargers. Unlike exhaust-driven turbochargers, electric superchargers are driven by an electric motor. This Basildon based company are looking for an enthusiastic Engineer with recent relevant industrial experience in high speed electric machine design and operation and experience of powertrain development and control.

Responsibilities include:
First level support to the customer regarding all questions regarding component and systems integration
Capture and document customer requirements, plan and execute application specific activities.
On-site customer engineering support
Delivery of customer programme deliverables
Testing and measurement of system parameters
Application of adjustable system parameters to achieve optimal system performance
Presentation of system performance to customer and management
Mind-set of continuous improvement

Skills include:
Fundamental knowledge of internal combustion engine
Project planning and coordination (preferably using MS Project)
Mechanical and electrical fabrication and installation
Excellent general computer skills (automotive specific e.g. CAN desirable)
Experience in use of CCP compliant calibration tools (e.g. ATI Vision)
Working knowledge of Requirements Management tools (e.g. DOORS)
Problem diagnosis and resolution
Powertrain and vehicle system simulation desirable

For further information please contact Bev Strawford at Jonthan Lee Recritment email bev.strawford@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Project Manager-Defence-6 Month fixed term contract - Essex - up to £41,000 (889784)

Apply now

Project Manager-Defence-6 Month fixed term contract
Essex, England
up to £41,000

Are you a project manager with experience of the defence electronics sector? Do you have a proven track record within imaging including electro-optics and sensors?

An Essex based leader in the electronics market is seeking a project manager - ideally PRINCE 2 qualified - to help define, plan and deliver a number of cutting edge projects. Amongst other duties, you will be responsible for managing,

Engagement with stakeholders - including customers
Project planning
Budget Control
Work BreakdownStructure
You should have experience with electo-optics and sensors

You will be responsible for multiple projects supplying imaging technology into high performance low volume applications, liaising with the customer on a day-to-day basis and co-ordinating activities to meet project requirements, ensuring delivery to timescale and budget. You will manage the projects from bid to delivery, preparing project plans, reducing risks and providing effective leadership to the team. The ideal candidate will be qualified to APMP or PRINCE 2 level and have experience of MS Project. You must be Security Cleared or eligible to gain UK Security Clearance.

This role comes with an attractive salary of up to £41,000 pa, based in Essex it is easily commutable from Brentwood, Harlow, Chelmsford, Braintree, Rayleigh and Basildon. If you think you can add value to this defence client by utilising your previous experience as a project manager working within imaging, electro-optics, sensors, radar or similar please contact Katherine Love as soon as possible on 01727 818720 or email your CV to katherine.love@jonlee.co.uk.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Systems Engineer - Basildon (888515)

Apply now

Systems Engineer
Basildon, Essex, England

Systems Engineer - Automotive - Basildon, Essex - £Neg + Bens

A Systems Engineer is required for this Essex based company who are the first automotive supplier to offer its customers a range of electric superchargers.

The successful applicant will be degree qualified with experience of systems engineering or electronic product development within a multifunctional environment.
A mind set of continuous improvement together with working to a structured product development methodology in the Automotive (or similar) sector is required.

Responsibilities include:
Review of Customer Requirements and subsequent translation into internal Systems / Requirements Specification.
Coordinate with the Hardware, Mechanical, Software and Test engineer to ensure full implementation and traceability of requirements.
Manage requirements baseline. Perform engineering assessment of all subsequent internal and external Change Requests made to the project and translation of same into specific systems requirements updates.
System Requirement Engineering, geometrical / mechanical integration of system components.
Specification, planning and execution of system and simulations.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

CDM Co-ordinator - Peterborough (888661)

Apply now

CDM Co-ordinator
Peterborough, Cambridgeshire, England

Our client is a global Project Management and Construction Company, they require a CDM Coordinator for a major civil engineering project based in  Peterborough.

The CDM Co-ordinator will be responsible for providing suitable and sufficient advice, and assistance, to ensure adequate arrangements are in place for managing the project.

Coordination of design work, planning and other preparation work for construction with a focus on health and safety.

Management of the flow of health and safety information between clients, designers and contractors.

The successful CDM Co-ordinator will have an expert knowledge of CDM and construction related health and safety issues and regulations together with suitable academic and/or professional qualification.

 

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and technical recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Project Engineer, Mechanical Engineering - Stoke - £28k - 37k per year (889786)

Apply now

Project Engineer, Mechanical Engineering
Stoke, West Midlands, England
£28k - 37k per year

Project Engineer, Mechanical & Production Engineering, Stoke, c.£35k + Benefits

Our client is pioneering the commercial engineering development within the Ceramics Industry

Working as part of a multi-disciplinary team of exceptional scientists and engineers the Project Engineer will play a central role in the installation and commissioning of this equipment and in developing the technology for full scale commercial application.

This will require close integration with the broader aspects of this exciting and challenging project to develop the technology for full scale commercial application.

The main objectives for the role will be

• design and develop mechanical/electro-mechanical energy delivery devices in high temperature environments and within DC
  electrical fields
• specify/design material handling and other ancillary equipment
• prepare technical documentation and reports
• contribute engineering skills and knowledge to other aspects of the project

Demonstrable experience with the design and specification of capital projects is essential.

Ideal educated to Degree level in a relevant Mechanical Engineerin

If you feel you can fulfil thisProject Engineer position, please apply or call Phil Burton on 0116 299 4482

Jonathan Lee Recruitment – Technical and Professional people contributing to your success

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Project Engineer, Electrical Design - Stoke - £28k - 37k per year (889785)

Apply now

Project Engineer, Electrical Design
Stoke, West Midlands, England
£28k - 37k per year

Project Engineer, Electrical & Electronic Design, Stoke, c.£35k + Benefits

Our client is pioneering the commercial engineering development within the Ceramics Industry.

Working as part of a multi-disciplinary team of exceptional scientists and engineers the Project Engineer will play a central role in the installation and commissioning of this equipment.  A key responsibility will be the design of electronics for the application of DC fields in high temperature environments. This will require close integration with the broader aspects of this exciting and challenging project to develop the technology for full scale commercial application.

The main objectives for the role will be:

• Working with the team to complete facility installation to time and budget
• Design electrical and electronic hardware for the application of DC electric fields in high temperature environments
• Work with the Project Scientific Leader to source equipment and electrical/electronic engineering works
• Prepare technical documentation and reports
• Establish close working relationships with our commercial clients and gain a detailed understanding of their needs across a variety of disciplines
• Integrate and share knowledge as part of a multi-disciplinary team

Demonstrable experience with the design and specification of electronics in capital projects is essential.

Ideal educated to Degree level in a relevant Electrical / Electronic Engineering

If you feel you can fulfil this Project Engineer position, please apply or call Phil Burton on 0116 299 4482

Jonathan LeeRecruitment – Technical and Professional people contributing to your success

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Maintenance Technician-Permanent-OEM - Coleshill - + Shift Allowance + bonus + benefits (KYU-Main-111012)

Apply now

Maintenance Technician-Permanent-OEM
Commutable from Birmingham, Coventry, Leicester
+ Shift Allowance + bonus + benefits

MAINTENANCE TECHNICIANS–
AUTOMOTIVE – COLESHILL – £25,000pa + Shift Allowance + Benefits

We are recruiting 3 Maintenance Technicians (not necessarily multi-skilled) to provide hands on technical support to resolve any machinery or equipment problems to minimise downtime and ensure production efficiency within a high production automotive OEM manufacturing environment.

You will be working on the TPM/PPM maintenance of robots who are working on the production of new engines for the leading OEM based in Coleshill.  An excellent opportunity with a firm that have very low turnover in staff, excellent purpose built manufacturing facility and genuine career options.

You must have:

• Experience with working in an automotive manufacturing environment with PLC's (Siemens S7/Allen Bradley); programming experience is not required.
• Qualifications to NVQ Level 3 or equivalent in electrical/mechanical discipline or a four year apprenticeship.

They react well to people with a keen attitude with intentions to learn and develop within the organisation; if you are electrically bias, then you must feel
comfortable with being put on courses to enhance your mechanical skills and vice versa.

The salary for this role is paying just under £25,000 per annum (rising by 15% after 2 years) + Shift + Pension + Healthcare + Bonus; the shift pattern is to be confirmed.  The client is looking to interview candidates as soon as possible for a January 2013 start.

Please contact Gareth Simpson at Jonathan Lee Recruitment on 01384 397 555 to discuss further or send your CV direct to using gareth.simpson@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Graduate Business Manager - Reading (889506)

Apply now

Graduate Business Manager
berkshire

Graduate Business Manager - Automotive - Berkshire - £Neg

A world leading supplier of high performance transmissions based in Berkshire are now looking for a Graduate Business Manager to manage designated Automotive and Engineering customer orders and projects.
This is an excellent opportunity to join a company specialising in Transmission Technology, supplying the Aerospace, Automotive, Defence, Marine and Motor Sports Sectors.

Responsibilities:
Establish, maintain and manage a strong working relationship with new and existing customers.
Manage inventory for project, to ensure customer requirements and commercial needs.
Build and develop relationships internally with other members of the Project Team, in particular Manufacturing Project Managers and Design and Engineering
Liaise with the Stores Department to despatch assemblies and components, to include the method of despatch.
Liaise with the Accounts Department and the Customer to ensure that the account is kept up to date, and within agreed credit limits

The successful applicant will be a student of Aeronautical, Automotive, Mechanical Engineering or similar degree, currently in their final year of study or recently graduated. Ideally with experience of customer management, commercial and project management you must have excellent organisational skills, able to work to tight deadlines and be able to build strong working relationships with a flexible approach to work.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Vehicle Protection Project Engineer - 22770 - £23.94 Ltd Co - Castle Bromwich - £23.90 - 23.90 per hour (889447)

Apply now

Vehicle Protection Project Engineer - 22770 - £23.94 Ltd Co
Castle Bromwich, West Midlands, England
£23.90 - 23.90 per hour

Position Description:
Project Engineer within Body Engineering. Primary activity will be to develop and deliver damage protection solutions for a number of BE commodities. Analysis and resolution of quality issues identified by internal and external indicators including Warranty, JD Powers, PCPA, RFT, TGW. Co-ordination of plant quality, production and supplier issues Report out at sub-system team reviews. VQR"s and PQR"s to schedule in support of the VRT Leader. Robust delivery of Quality driven projects utilising standard reporting methods such as 8D, 6 panels, A3s. Management of engineering change in WERS through CMM as required.

Skills Required:
Proven project management capability, ideally encompassing work with suppliers. General Engineering knowledge of Body components, design, function, performance, production and manufacturing requirements. Logical and methodical approach to component applications, verification and validation. An understanding of Engineering Standards. Effective communicator with strong organisational, presentation and numerical skills. PC Literacy in Microsoft PowerPoint, Excel, Word etc. Working knowledge of change management processes: AIMS, WERS, PACN.

Skills Preferred:
CAD literacy, ability to manipulate and interrogate CAD data and use of associated visualisation tools would be an advantage. Working knowledge project delivery processes, PCS/GPDS/PPAP. Experience in the use of engineering tools, FMEA, Six Sigma, problem resolution (8D) etc.

Experience Required:
Successful history of delivery within the automotive sector at an OEM or tier #1 supplier.

Experience Preferred:
Ideally within the automotive sector or adjacent industries, e.g. rail, aerospace, defence, energy etc.

Education Required:
Ideally degree educated, in a relevant field or subject.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Safety Component Specialst Engineer - 23280 - £25.66 Ltd Co - Gaydon - £25.70 - 25.70 per hour (889434)

Apply now

Safety Component Specialst Engineer - 23280 - £25.66 Ltd Co
Gaydon, Warwickshire, England
£25.70 - 25.70 per hour

Position Description:
Specialist Engineer for Safety Components Systems for forward model programmes, Engineering knowledge of Safety Component system design, function, performance, production and manufacturing requirements.

Skills Required:
Proven Project management capability, demonstrated by recent delivery on time and budget. Excellent communications skills. Demonstrated ability to communicate at all levels, PC Literacy, Microsoft Project, Power Point, Excel, Word etc.

Skills Preferred:
CAD Literacy, ability to manipulate and interrogate CAD data and use associated visualisation tools. Ability to generate CAD data in Catia v5 would be an advantage. Significant experience in use of engineering tools, FMEA, Six Sigma, problem resolution etc. Working knowledge of project delivery processes, GPDS / FPDS / PRINCE2 or similar Working knowledge of change management processes.

Experience Required:
Successful history of project management delivery.

Experience Preferred:
Ideally within the automotive sector or adjacent industries, e.g. rail, aerospace, defence, energy etc.

Education Required:
Ideally degree educated.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

New and Modified Features Project Managers - 23430 - £29.85 Ltd Co - Gaydon - £29.90 - 29.90 per hour (889776)

Apply now

New and Modified Features Project Managers - 23430 - £29.85 Ltd Co
Gaydon, Warwickshire, England
£29.90 - 29.90 per hour

New and Modified features Project Managers 23430 £29.85

New and Modified Features Project Managers are required to support a major new development within a market leading design/manufacture of high end luxury/off-road vehicles based in the West Midlands.
This role is part of an exciting new expansion of the team to meet increasing demands with the launch of future models within the Special Vehicle division.

As a Project / PMST manager you'll introduce and develop new and modified components for Interior Trim enhancements requested by Project Teams and end user.
The job entails Structuring Release packages and liaison with suppliers. You must be capable authoring robust plans to ensure company test procedures are deployed. Your will possess both strong project management skills and business skills .

Skills Required:
-Formal training and be able to provide accredited training certificates to support this.
-Engineering Design/ Development background within Automotive Trim or similar for Interior components, ideally having worked within both OEM and Tier 1 trim suppliers .
-Working knowledge of Key manufacturing processes for interior trim components and capable of leading designs at the outset to ensure components are feasible for manufacturing purposes chosen.
-Experience of design / development and validation for a range of components / assemblies encompassing materials selection and covering processes including, plastics / fabrications plus veneers, leather, foils and paints for interior trim.

It would be a distinct advantage to have the following:
-WERS training.
-Preparation and ownership of engineering release packs.
-Capable user of MS Office software packages.
-Have worked within or had exposure to STA roles and responsibilities experience Required:
HND / Degree level with considerable post training experience.
Where not all requirements are met we reserve the option to offer jobs at lower levels.


Due to the nature of the role, you may be required to work on other site locations within the group for periods of time. Existing sites within the UK are base within the West Midlands and Halewood areas. 1-off role will be based primarily at Solihull , Birmingham other roles will be based at Gaydon.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss these New and Modified Features Project Managers role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principal Digital Modeller - Automotive - West Midlands - Warwick (889749TW)

Apply now

Principal Digital Modeller - Automotive - West Midlands
Warwick, Warwickshire, England

Are you a digital modeller with excellent 3D modelling skills using Alias Studio Tools with OEM studio support? Do you have a working knowledge of Adobe PhotoShop and skills with 2D presentation and animation in addition to Class A surfacing expertise? This position may be perfect for you.

A 6 month contract has arisen for a Principal Digital Modeller within the Automotive industry with a market leader in commercial vehicles – among the top three in passenger vehicles – with winning products in the compact, mid-size and utility vehicle range. Knowledge of RPT/Milling and clay model support would be a serious advantage.

You should have experience of the following;

• Excellent 3D digital modelling skills
• Alias Studio Tools
• OEM studio support
• 2D presentation and animation ability and Class A surfacing expertise
• Component manufacturing tooling requirements
• Adobe PhotoShop
• RPT/Milling plus clay model support

This is an excellent opportunity to gain experience with a market leading automotive client based in the West Midlands with a 6 month contract attracting a very competitive contract rate – call for further information. This role will close as soon as a suitable candidate is found so please don’t delay in contacting Nick Jones at Jonathan Lee Recruitment on 01384 446 106.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Senior Systems Control Engineer - Motorsport - Oxfordshire - Oxfordshire (889628)

Apply now

Senior Systems Control Engineer - Motorsport - Oxfordshire
Oxfordshire, England

Senior Systems Control Engineer - High Performance Vehicles - £Neg + Benefits - Oxfordshire

A Senior Systems Control Engineer is required for this iconic motorsport company based in Oxfordshire, to work within their Advanced Engineering team for High Performance Vehicles and other projects.

The successful candidate will be responsible for the development of automotive real-time software using both auto coded and traditional tools.

Ideally you will have experience in generating specifications for software coding from requirements capture along with knowledge of the standards and methods applicable to automotive real-time software engineering such as MISRA C guidelines.

Must have demonstrable experience of real-time software design as part of a team that includes the use of version control software.

Experience of building models for a real time platform and an understanding of mechanical engineering would be advantageous.

To discuss this role further please contact Joe Wadman on 01268 88963 or email your details and requirements to joe.wadman@jonlee.co.uk. Alternatively visit our website www.jonlee.co.uk to view all our current vacancies.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electrical Control Systems Engineer - E Mids - £35-40k DOE - Leicestershire - £35k - 40k per year + flexible benefits (889775)

Apply now

Electrical Control Systems Engineer - E Mids - £35-40k DOE
Leicestershire, England
£35k - 40k per year + flexible benefits

Electrical Control Systems Engineer - E Mids - £35-40k

A electrical control systems engineer with a solid background in PLC programming and control systems installation is required to join a market leading design/manufacturer of conveyors and storage systems based in the East Midlands.

You must have experience with:
- Design safe and reliable control systems that comply with all relevant regulations.
- Design Controls to meet project timing plans and delivered within budget.
- PLC Programming experience (writing code).
- Project managing new installations from cradle to grave.
- Customer training on newly installed equipment.
- Working with live electrics.
- Knowledge of networking technologies eg serial, ASI, Profibus and Ethernet.

The salary range for this role is £35-40,000pa depending on experience with flexible benefits to be negotiated at interview stage. Interviews are due to take place within the next 10 days with a view to starting ASAP. Holding relevant electrical qualifications (min HNC) is a must.
To discuss the electrical control systems engineer role please contact Glenn Clark at Jonathan Lee Recruitment on 01162994492.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Composite Manufacturing / Facilities Engineer - Southampton - Up to £35/hr Ltd Co. (889763)

Apply now

Composite Manufacturing / Facilities Engineer
Southampton, Hampshire, England
Up to £35/hr Ltd Co.

Our client is a world leader in the design and manufacturing of Aerostructures for both civil and military Aerospace markets, and they are currently looking to appoint a new Composites Manufacturing / Facilities Engineer to work on Composite Production / Tooling / Test Facilities development on their A350XWB Trailing Edge Secondary Structure program.

Reporting to the Engineering Technical Lead and in conjunction with the Manufacturing Engineering Team, work will include capital equipment specification, selection, installation and commissioning for manufacture for both in-autoclave and out-autoclave panels. They will also develop capacity plans for rate manufacture and plan capital equipment purchases and installation to coincide with rate increases.

Candidates must be educated to Degree-level in Aerospace or a related Engineering discipline, and possess a strong working knowledge of composite manufacturing, testing equipment and processes. They will need to interpret and develop project plans, capacity plans, and have a good understanding of factory simulation techniques and the implementation of new equipment into an existing and / or new facility. They will have excellent communication skills and be able to think clearly and creatively under pressure to solve complex problems. They must also be PC literate, with proficiency in MS Project and AutoCad.

If you require further information regarding this positon, please contact Alec Price on 01384 446126.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Business Manager - Berkshire (889279)

Apply now

Business Manager
Berkshire, England

Business Manager - Motorsport - Berkshire - £Neg

A world leader in the supply of high performance transmissions, specialising in transmission technology require a Business Manager to provide support for various motorsport formulae.
Ideally degree qualified in an engineering related discipline, with substantial experience in an engineering environment along with commercial astuteness and awareness of confidentiality.

Responsible for managing designated customers to achieve agreed objectives for customer retention and business development you will also manage batch sizes and acceptance of repeat order frequency in consultation with the Manufacturing Project Managers, ensuring customer and the company commercial needs are met.
Must have project management experience, including preparation of proposals and budgetary control.

The Business Manager will be responsible for producing sales plans for the formulas and the market place on an annual basis, proposing marketing campaign ideas, proactively pursuing generation of leads and subsequent quotations and co-ordinating business development activity.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Program Manager - Durham - £40k - 50k per year + package (889774)

Apply now

Program Manager
Durham, County Durham, England
£40k - 50k per year + package

Program / Project Manager - Automotive -- £40,000 - £50,000 - North East

My client part of a market leading international group dedicated to the design, development and manufacture of metal components and structural systems for the automotive industry. Reporting to the UK Program Manager, an exciting opportunity has arisen for a highly professional person to manage and introduce new chassis products through the use of a cross functional team principles

Main Duties
In line with the demands of global Customers for a global supply network, my client have an international business, and based within a growing Business Unit that will effectively support the introduction of new products manufacturing bases across the globe.

Job description
-A key element of the role is to develop a culture of continuous improvement and build strong customer relationship as well as motivating all staff involved in the program and to ensure their individual performance is reviewed and in line with company and program objectives.
-Take a lead in global quotation activities during the customer enquiry stage and continue to provide on going support during this process.
Required to manage program's QCD from concept stage to divisional launch, including all prototype phases and support divisional global product implementation teams.
-The post holder will have responsibility for defining program timing and milestone targets to ensure customer and company requirements.
-Take the lead and co-ordinate regular reviews in order to establish progress against program plans and ensure any corrective action is implemented as necessary to ensure that QCD is achieved.


Key skills and experience
-Experience in providing a fully integrated service to the customer within a Vehicle Development environment and ability to travel and work at customer / division sites when required
-Candidates will be qualified to degree or equivalent level in Engineering or related subject.
-The successful candidate will require strong people management skills and ability to lead, manage and motivate a team across global locations.
-You will have a proven track record of delivering major engineering / capital programs on time and within budget constraints.
-Commercial awareness and business acumen will be needed along with the ability to translate customer requirements and specification into a concise work plan achievable and clear to those in internal functional areas.

If you are interested in this Program Manager role please contact Joe Worthington on 01924 211120 as soon as possible.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Head of New Product Development - Lincolnshire - £60k + bens - Grantham - £55k - 60k per year + Contributory Pension + Private Medical (889766TW)

Apply now

Head of New Product Development - Lincolnshire - £60k + bens
East Midlands
£55k - 60k per year + Contributory Pension + Private Medical

"Best in class" is never easy to achieve but are you up for the challenge? 

If you have senior-level product engineering experience, rich exposure to 'design for manufacture' and a solid history of new product introduction then this is the opportunity for you. 

A new role, Head of Product Engineering has been created reporting to the Chief Executive, with an attractive package of £60,000 plus benefits. Your challenge is to orchestrate the complete product design and development process through to production for one of the largest manufacturers of high quality furniture in the UK, supplying to most high-end retailers including Laura Ashley, DFS and Next. 

In addition to a design or engineering related degree, you will have experience in the following: 

• Significant experience at senior level in a product design and/or development function 
• Design for manufacture (DFM), and new product introduction (NPI) experience 
• Working as part of an integrated site management team 
• Resource planning to meet customer demands 
• Leading and managing a product team of up to 20 people 
• Providing a design interface with key customers 

The Head of Product Engineering's role will be to oversee the whole process, and through a team of around 20 people, ensure that all gateways are met including design, development, validation and production handover through to providing complete bill of materials to production. It's likely that you have previously worked at a level giving you an overall awareness of all product design or product development processes involved in successfully launching over 30 new designs per year within very short lead times, however the industries you have worked in is less important. 

This is an ambitious, forward-thinking organisation and this role represents an excellent opportunity for the right person. The salary for the Head of Product Engineering is up to £60,000 plus contributory pension scheme and private medical cover, reflecting the experience and calibre of person needed. Interviews will be scheduled in late October/November so don't hesitate in applying today. 

If you would like to know more about this exciting product design management opportunity, contact Henry Noteman at Jonathan Lee Recruitment on 07813 814716.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Special Vehicles Wheels Project Engineer - 23404 - £25.64 Ltd Co - Gaydon - £25.60 - 25.60 per hour (889764)

Apply now

Special Vehicles Wheels Project Engineer - 23404 - £25.64 Ltd Co
Gaydon, Warwickshire, England
£25.60 - 25.60 per hour

An ETO (Special Vehicle) Chassis project Engineer is required to support a major new development within a market leading design/manufacture of high end luxury/SUV/off-road vehicles based in the West Midlands.
This role is part of an exciting new expansion of the Engineering to Order team to meet increasing demands with the launch of future models within the Special Vehicle division, Wheels section.

Your role will be to :
-Project Manage engineering delivery from concept to production of wheels and related products, within a team of 17 engineers.
-Project managing and engineering wheels for a given programme for the full life of a vehicle delivery programme.
-Understand the product development process including FMEA"S, DVP.
-Tracking and managing suppliers ensuring testing is completed.
-Organising tests and be the single point contact for a given programme for the Engineered to order (Special Vehicles) chassis engineering tea.
You must:
-Have Chassis engineering experience, esp. wheel engineering.
-Be able to read engineering drawing data and understand and use engineering standards and specifications.
And preferably experience of:
-Wheel engineering delivery a major advantage (some training can be given)
-Catia V5 knowledge useful, Digi-buck.
Ideally Engineering degree level although other engineering qualifications are applicable based on experience .City and Guilds min.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this ETO (Special Vehicle) Chassis project Engineer role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk br

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Special Edition Vehicle Wheels Project Engineer - 23403 - £25.64 Ltd co - Gaydon - £25.60 - 25.60 per hour (889767)

Apply now

Special Edition Vehicle Wheels Project Engineer - 23403 - £25.64 Ltd co
Gaydon, Warwickshire, England
£25.60 - 25.60 per hour

An ETO (Special Vehicle) Chassis project Engineer is required to support a major new development within a market leading design/manufacture of high end luxury/SUV/off-road vehicles based in the West Midlands.
This role is part of an exciting new expansion of the Engineering to Order team to meet increasing demands with the launch of future models within the Special Vehicle division, Wheels section.

Your role will be to :
-Project Manage engineering delivery from concept to production of wheels and related products, within a team of 17 engineers.
-Project managing and engineering wheels for a given programme for the full life of a vehicle delivery programme.
-Understand the product development process including FMEA"S, DVP.
-Tracking and managing suppliers ensuring testing is completed.
-Organising tests and be the single point contact for a given programme for the Engineered to order (Special Vehicles) chassis engineering tea.
You must:
-Have Chassis engineering experience, esp. wheel engineering.
-Be able to read engineering drawing data and understand and use engineering standards and specifications.
And preferably experience of:
-Wheel engineering delivery a major advantage (some training can be given)
-Catia V5 knowledge useful, Digi-buck.
Ideally Engineering degree level although other engineering qualifications are applicable based on experience .City and Guilds min.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this ETO (Special Vehicle) Chassis project Engineer role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Advanced Engineering Technical Support Analyst - 23426 - £18.14 ltd Co - Gaydon - £18.10 - 18.10 per hour (889768)

Apply now

Advanced Engineering Technical Support Analyst - 23426 - £18.14 ltd Co
Gaydon, Warwickshire, England
£18.10 - 18.10 per hour

A Technical Support Analyst - Advanced Engineering is required to support a major new development within a market leading design/manufacture of high end luxury/SUV/off-road vehicles based in the West Midlands
This role is part of an exciting new expansion of the Advanced Engineering team to meet increasing demands with the launch of future models.

Your role will be to Provide Technical support for Architecture Leader
You will have:
-Awareness of project time line management.
-An ability to work with financial information and combine business skills with technical decision-making.
-Analysis of data, compiling reports.
-Ability to organise events and collate information post these events for processing.
-Ability to understand and record processes.
-Data collection and processing.
-Good PC skills.
You would be expected to be at least qualified to A Levels, or equivalent higher level education.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this Technical Support Analyst - Advanced Engineering role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Automotive Safety Engineer - Gaydon (888903)

Apply now

Automotive Safety Engineer
Gaydon, Warwickshire, England

A Vehicle Safety Engineer - Hybrid Engineering is required to support a major new development within a market leading design/manufacture of high end luxury/SUV/off-road vehicles based in the West Midlands
This role is part of an exciting new expansion of the Hybrid Engineering Electric Vehicle team to meet increasing demands with the launch of future models

As Safety engineer you'll have knowledge of hybrid systems, especially HV batteries, power electronics and control systems and be responsible for the following:
- Production of the system safety case.
- System Hazard analysis and risk estimation.
- Production of safety test plan.
- Liaison with system supplier to ensure safety requirements are met and documented.
- Liaison with any 3rd party safety assessors to ensure 3rd part sign-off.
- Liaison with the System team to translate safety requirements into system requirements.
- Support of system safety reviews.
- Support/training of System team to carry out safety related tasks.

You will meet the IEE guidelines for competency with respect to safety related systems.
This should include the following:
- Strong experience with safety related systems, particularly complex electronic systems.
- Actual involvement in safety case production and 3rd party assessment.
- Safety critical software techniques and methods.
- Design for safety related systems.
- Safety system analysis
- Experience with the various safety standards (IEC91508, ISO26262, Def-Stan etc).

The candidate should be qualified to degree level or be able to demonstrate equivalent levels of training and experience

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this Vehicle Safety Engineer - Hybrid Engineering role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

HV EDS PMST Support Engineer - 23306 - £20.56 Ltd Co - Gaydon - £20.60 - 20.60 per hour (889480)

Apply now

HV EDS PMST Support Engineer - 23306 - £20.56 Ltd Co
Gaydon, Warwickshire, England
£20.60 - 20.60 per hour

A Hybrid Electrical Vehicle Engineer is required to support a major new development within a market leading design/manufacture of high end luxury/SUV/off-road vehicles based in the West Midlands
This role is part of an exciting new expansion of the Electric Vehicles Division to meet increasing demands with the launch of future models within the Hybrid Vehicles division.

Your role will be to :

- Develop the Hybrid Vehicle Electrical Distribution System including charging cable for new Electrical Vehicles (xEV).
- Key tasks for the team include: - programme delivery and supplier management
- Requirements definition, including capturing and agreeing cascaded requirements from the industry
- Work with the tier 1 supplier partner in the development and validation of the xEV HV EDS according to programme technical, cost and timing targets.
- Complete the quality deliverables, robustness checklist and derive critical design and manufacturing actions from them
- Complete the hazard analysis and support the functional safety analysis
- ork with tier 1 harness supplier to develop the HV EDS package that balances the cost and vehicle attributes targets.
- Support the report out project status to project leaders and senior managements at key milestones."

Skills Required:

- Proven track record of developing EDS systems and/or components
- Strong appreciation of vehicle systems and architectures.
- Experience in component engineering for automotive application with EDS background
- Demonstrable ability to resolve technical and process issues within a Project Team environment.
- Experience in robust component engineering development essential.
- Systems Engineering or Safety Engineering Skills. 6 Sigma green belt or black belt experience.
You will be Degree level qualified in Systems, Mechanical, Electrical or Electronic engineering or closely related subject

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this Hybrid Electrical Vehicle Engineer role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

ETO Chassis Project Engineer - 23325 - £22.35 Ltd Co - Gaydon - £22.40 - 22.40 per hour (889510)

Apply now

ETO Chassis Project Engineer - 23325 - £22.35 Ltd Co
Gaydon, Warwickshire, England
£22.40 - 22.40 per hour

An ETO (Special Vehicle) Chassis project Engineer is required to support a major new development within a market leading design/manufacture of high end luxury/SUV/off-road vehicles based in the West Midlands
This role is part of an exciting new expansion of the Engineering to Order team to meet increasing demands with the launch of future models within the Special Vehicle division, Wheels section.

Your role will be to :
- Project Manage engineering delivery from concept to production of wheels and related products, within a team of 17 engineers
- Project managing and engineering wheels for a given programme for the full life of a vehicle delivery programme
- Understand the product development process including FMEA"S, DVP
- Tracking and managing suppliers ensuring testing is completed,
- Organising tests and be the single point contact for a given programme for the Engineered to order (Special Vehicles) chassis engineering team
You must:
- Have Chassis engineering experience, esp. wheel engineering
- Be able to read engineering drawing data and understand and use engineering standards and specifications.
And preferably experience of: Automotive chassis projects - Brakes ,wheels, tyres, chassis components and exhaust


Ideally Engineering degree level although other engineering qualifications are applicable based on experience .City and Guilds min

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this ETO (Special Vehicle) Chassis project Engineer role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Hybrid Procject Engineer - 23390 - £22.35 Ltd Co - Gaydon - £22.40 - 22.40 per hour (889708)

Apply now

Hybrid Procject Engineer - 23390 - £22.35 Ltd Co
Gaydon, Warwickshire, England
£22.40 - 22.40 per hour

A Hybrid Vehicle Project Engineer is required to support a major new development within a market leading design/manufacture of high end luxury/off-road vehicles based in the West Midlands.

 
This role is part of an exciting new expansion of the team to meet increasing demands with the launch of future models
The role will be working in in a team developments appropriate test/verification in support of electric propulsion technology projects to deliver customer satisfaction.

You will have knowledge and experience with,
- Project Management
- Vehicle/Component Engineering systems
- Data/statistical analysis
- Creation of vehicle level usage patterns for a variety of customers and markets
- Preferably experience of IBM Rational DOORS
- Vehicle evaluation Electrified vehicle experience (e.g. Hybrids, Battery EV"s)
- Off load vehicle knowledge
- Hot/cold) test experience
- Ergonomics/Human Factors.
You will preferably be Degree qualified

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

To discuss this Hybrid Vehicle Project Engineer role please call John Williams at Jonathan Lee Contracts on 01268 889250 john.williams@jonlee.co.uk

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.