Safety CAE Principal Engineer - Coventry (RGR-105180)

Apply now

Safety CAE Principal Engineer
Coventry, West Midlands, England

Based on a very attractive University campus, this Centre of Excellence is building on its growing reputation for Electric Vehicle (EV) development. It has plans to expand it operation and increase the number of talented Engineers and Specialists it employs, working on new projects incorporating cutting edge technologies. This growth has created an opportunity for a Safety CAE Principal Engineer to join the team. This role is based in Coventry commutable from Birmingham, Warwick, Leicester, Gaydon, Milton Keynes, Leamington, Northampton, may also interest candidates in the Crewe area. Ideally being offered as a permanent staff job, will also consider hourly contract.
As the Safety CAE Principal Engineer working on vehicle programmes within the structural and safety CAE team, the job will include the following responsibilities:

• Leadership of the safety CAE competency on vehicle projects
• Support all aspects of pre and post processing of LS-Dyna high speed load cases
• Project management of programmes, adopting a disciplined and methodical approach to their work
• Work across other CAE functions and code domains to gain a whole vehicle appreciation
• Primarily UK based, there will be the need to spend approximately one week in 12 overseas at the parent company
• Occasional travel to test facilities, suppliers and other world-wide locations will also be necessary on an adhoc basis
  Candidate requirements:
• Degree or similar qualification
• Strong numeracy and literacy
• A minimum of 5 years automotive industry experience
• Have evidence of achieving results through effective leadership of a team, being able to translate the business plan into individual objectives for staff
• A minimum of 5 years applied experience with LS-Dyna,, or similar, used for crash analysis
• Secondary competency in Durability and NVH analysis would be an advantage
• Have the ability to overcome cultural barriers

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Principal Vehicle Exteriors Designer - West Midlands (RGR-104696)

Apply now

Principal Vehicle Exteriors Designer
West Midlands, England

A long established Indian passenger car and commercial vehicle manufacturer with ambitious plans to increase its penetration into European and ROW markets. Now embarked on the design of new vehicles at its Coventry Design Studio and offering an opportunity for an energetic and talented Principal Design Engineer to join the team for an initial 12 month contract.

In this role you will be working on new vehicle Exterior concept designs leading a small team of designers. Utilising ICEM, ALIAS, RHINOS or similar you will also need to have excellent 2D digital presentation skills. Highly creative and with a good eye for detail you will be guiding physical and 3D teams in the development of your projects, developing the Exteriors of the future. You will be presenting future design concepts to Senior Management using state of the art presentation techniques. You`ll be guiding the digital modelling team in the development of your design project in Clay and Hard models and working with the CAD based surface development team in the refinement of design themes. Leading show car development including model build and assembly you will be working cross functionally with Engineering and Programme Control groups to ensure approved design themes are maintained throughout the engineering development phases. There will also be the requirement to travel extensively to India and other overseas destinations.

Candidates will need to be Degree qualified in product, industrial or automotive design and have a proven track record, having worked for at least 5 years in Design Studio environments. Must be bright, enthusiastic, creative, self motivated with the ability to overcome cultural barriers and inspire a team.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Battery Technology Engineer - - Coventry (RGR-104649)

Apply now

Battery Technology Engineer -
Coventry, West Midlands, England

Based on a very attractive University campus, this Centre of Excellence is building on its growing reputation for Electric Vehicle (EV) development. It has plans to expand it operation and increase the number of talented Engineers and Specialists it employs, working on new projects incorporating cutting edge technologies. This has created an opportunity for a Battery Technology Test Engineer to join the team. This role based in Coventry commutable from Birmingham, Warwick, Leicester, Gaydon, Milton Keynes, Leamington, Northampton.

A new battery development laboratory is being established at the Technical Centre. Part of the job will be to support bench work and conducting data analysis on the results of ageing, degradation, performance and thermal testing. Write reports detailing conclusions and recommendations. Another aspect of the role will be to assist in the development of a battery technology road map, contributing from a early stage offering the opportunity to influence the future direct of this technology. The job also offers the opportunity to work on collaborative projects with other enterprise, academic or research institutions, so any experience of making applications for grant aid from Government would be a particular advantage. This is a primarily Coventry based job with occasional overseas travel.

Candidates will need to have a first degree in Chemistry, Physics, Physical Sciences. A MSc or PhD would be preferred. One to 2 years industry experience would be ideal but recent graduates will also be considered. Must have some exposure to test or experimentation in Li-ion batteries or similar electro-chemical field with a good background in data analysis, development of theories and application of test data in new programmes.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Advanced Engineering - Senior Engineer - West Midlands - £20k - 35k per year + Dependent upon experience and qualifications (RGR-104756)

Apply now

Advanced Engineering - Senior Engineer
West Midlands, England
£20k - 35k per year + Dependent upon experience and qualifications

Based on a very attractive University campus, this Centre of Excellence is building on its growing reputation for Electric Vehicle (EV) development. It has plans to expand it operation and increase the number of talented Engineers and Specialists it employs, working on new projects incorporating cutting edge technologies. This growth has created an opportunity for an Engineer to join its Advanced Engineering Group, probably taking on more responsibility at an early stage in their career. Based in Coventry, this location is commutable from Birmingham, Leicester, Leamington, Milton Keynes, Northampton.

In this role you will have the opportunity to work as a design / development Engineer on cutting edge hybrid and EV technologies including fuel cells and regenerative braking. You will develop technologies to the point of implementation readiness and then support commercial introduction. This will involve design studies, supporting test work, data acquisition and analysis. Good project planning and management skills will be needed together with the ability to research and understand any legislative issues. You will also be working with tier 1 suppliers for part supply and test services.

The role will be attractive to hands-on, practical Engineers, early in their career who are seeking more responsibility and technical challenge. Ideally Masters Degree qualified, candidates with a minimum of a 2.1 Honours Degree will also be considered. A background in Mechatronics, Automotive Engineering, Electrical / Electronics or Physics will be most suited to this role. Proficiency in a CAD package such as Catia will be necessary. Candidates must be bright, energetic, enthusiastic, quick learners and keen to take on new challenges. Must be able to work in the UK without sponsorship.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Package Principal Engineer - West Midlands (RGR-103729)

Apply now

Mechanical Package Principal Engineer
West Midlands, England

Based on a very attractive University campus, this Centre of Excellence is building on its growing reputation for vehicle and powertrain development. It has plans to expand its operation and increase the number of talented Engineers and Specialists it employs, working on new projects incorporating cutting edge technologies. This growth has created an opportunity for a Mechanical Package specialist to join the Vehicle Package and Concepts team. This role is based in Coventry and there may be some occasional overseas travel required. Location commutable from Birmingham, Warwick, Leicester, Gaydon, Milton Keynes, Northampton, may also interest candidates in the Crewe area.
This is a Principal Engineer graded management role, the main activities and tasks will include:

• Identification of under-bonnet and under-body mechanical package issues through physical vehicle and DMU review
• Development of initial proposals for part design changes, clipping enhancements, protection requirements to resolve issues identified
• Co-ordination and leadership of cross-functional teams to confirm optimal solutions for issues
• Production of CAD layouts showing proposed changes and successful integration into vehicle DMU
• Support the build of physical demonstrator vehicle based on existing cars to demonstrate proposed changes
• Specification and initiation of appropriate test and verification methods to achieve robust engineering sign off of changes
• Tracking of issues from identification through to implementation of solution and engineering sign off
• Reporting of issues status as required, including management reviews
  Candidate requirements and essential experience:
• Degree, HND or HNC qualified with a minimum of 5 years experience of under-bonnet package design
• A good awareness of key design factors in the development of robust flexible component routings
• Have an understanding of the development and usage of dynamic engine roll models
• A firm understanding of mechanical package integrity assurance; modelling, test, engineering sign off and product launch
• A firm understanding of design for serviceability and manufacture
• Proficiency in the use of Catia V5 or Pro-E
• working in and leading cross functional teams
• Good communication and interpersonal skills
• Proficiency in Vismockup or similar DMU package
• Proficiency in MS Word, Excel and Powerpoint
• Experience in the use of Teamcentre would be useful

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Dimensional Management Principal Engineer - West Midlands (RGR-103727)

Apply now

Dimensional Management Principal Engineer
West Midlands, England

Based on a very attractive University campus, this Centre of Excellence is building on its growing reputation for vehicle and powertrain development. It has plans to expand it operation and increase the number of talented Engineers and Specialists it employs, working on new projects incorporating cutting edge technologies. This growth has created an opportunity for a Dimensional Management Principal Engineer to support its Craftsmanship function. This role based in Coventry also offers the opportunity to spend time working with colleagues at the parent company based in India. Location commutable from Birmingham, Warwick, Leicester, Gaydon, Milton Keynes, Northampton, may interest candidates from Oxford, Crewe areas.
Main tasks and activities will include the following:

• Carry out 3D tolerance analysis utilising Vis VSA
• Develop coordinated PLP, GDandT and process direction toward meeting the dimensional targets and functional objectives.
• Introduce best practice DM activities into new vehicle programmes
• Lead dimensional improvements on vehicle geometry through part, tooling or design actions in responsible systems
• Assure all PLP`s are coordinated between supplier, assembly equipment and gauging
• Establish measurement plans
• Maintain matrix of all dimensional issues in respective area and drive root cause and problem
• Perform data management, root cause analysis and comprehensive reporting
• Provide technical support for delivering and commissioning of checking fixtures (single parts and combined fixturing)
• Assist stamping and supplier engineering activities with Part buyoff and prioritization matrices for part improvements and final buyoff all subsystem parts on gauges through, Part Qualification and Blue Buck evaluations.
• Depending upon project demands, it may be necessary to spend up to one week in four in India.
  Candidate requirements:
• Ideally Degree qualified, will consider HND, HNC
• Vis VSA trained and proficient in GDandT
• Catia v5 CAD skills
• Comprehensive knowledge of statistics and SPC techniques
• Experience of BIW tooling and assembly
• Minimum of 3 years Automotive industry experience
• Must be willing to travel to travel to launch locations and review new model progress, providing leadership for team members where necessary
• Good knowledge of general engineering fundamentals
• Be familiar with the vehicle product development process, supplier quality management, manufacturing process and the Pilot process in a production environment
• Experience with sheet metal stamping / assembly quality, inspection and processing
• Familiar with appropriate metrology equipment for root cause diagnostics (Scanning, CMM, Leica, Perception, Blue Buck, component gauges)
• Dimensional control, manufacturing process engineering, plant quality control, body engineering, body shop production and sheet metal product launch
• Knowledge of gauges and inspection techniques
• Experience solving dimensional issues, wind noise, water leak, squeak and rattle

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

EMC Test Engineer - West Midlands (KYU-105157)

Apply now

EMC Test Engineer
West Midlands, England

The Product Validation Group provides industry leading expertise for the validation of Automotive products and a range of products from the Aerospace industry.The facilities include EMC, Vibration, Climatics and a range of Mechanical and Electronic Prototyping support services. The EMC team has become the Aerospace Centre of Excellence for Product Validation in the UK which, along with the comprehensive Environmental facilities, range of Vibration systems and number of Climatic chambers, provides the total solution to both the client and its external customers for Product Validation.
This position exists within a dedicated team providing EMC validation and design services for a range of electronic products and systems within Tier 1 automotive and aerospace businesses. It will involve working closely with internal and external customers to ensure that products comply with various customer specifications and, where applicable, legal requirements.

What you ll do

Set up and conduct all types of EMC test within the scope of the laboratory
Follow test specifications and plans, and take responsibility for the accurate recording of results
Check and calibrate equipment and test chambers
Supervise and assist customers in operating their equipment in the laboratory
Maintain log books, collate test data and produce technical reports.
What we are looking for

Degree or HNC/HND in electronics or physics, or equivalent experience
Experience in setting up and conducting EMC tests
EMC/RF experience in the context of testing
A good understanding of RF measurement principles and modern test and control instrumentation
Evidence of automotive or aerospace products/systems, preferably from working within one of those industries.
Knowledge/experience of quality systems, preferably UKAS
Evidence of excellent written and verbal communication skills
Ability to work effectively and accurately under pressure
Ability to produce clear and accurate reports
Willingness to work overtime and shift patterns when necessary

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principal Mechanical Systems Engineer - West Midlands (KYU-105047)

Apply now

Principal Mechanical Systems Engineer
West Midlands, England

The Role
We are looking for a Mechanical Systems Engineer to deliver systems for a number of high profile and challenging global applications with European vehicle manufacturers. You will work alongside the Electrical Systems Engineer and lead our design teams in achieving outstanding results. The role is ideally suited to an engineer with a drive to exceed customer expectation and who is willing to take ownership for a significant part of the system by driving the design teams to deliver correct, safe and robust designs to time, to budget and to the highest quality
What you ll do
Capture customer requirements documents, generate system requirements and flow down to sub-system requirements. Review and agree requirements with customer and sub-system design teams as necessary
Lead design teams to ensure timely delivery and effective integration of each sub-system into a complete system that meets system level targets
*Includes coordination of tolerance studies, updates to interface drawings and build pedigrees and management of the BOM
Generate test procedures, review test specifications, results and test activities as required to ensure requirements at all levels are verified
Support and lead issue resolution activities as necessary
Support dFMEA, PFMEA and other necessary analyses both at a system level and ensuring continuity at a sub-system level
Evaluate and approve product change requests from internal and external sources including packaging studies
What we are looking for
Essential:
2.1 or better degree in a relevant engineering discipline
Excellent understanding of mechanical design principles in both 2D and 3D CAD
Rigorous and positive approach to issue resolution
Demonstrated ability to work proactively
Knowledge of a range of engineering disciplines

Desirable:
A working knowledge of electronics
Experience of mechanical design for a high volume product

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Manufacturing Engineer - Chichester (KYU-104939)

Apply now

Manufacturing Engineer
Chichester, West Sussex, England

Our client is a presitigious Automotive manufacturer who require two experienced Process Manufacturing Engineers to carry out a complete system audit within a vehicle assembly area for a 12-month fixed term contract.
Responsibilities -As an experienced Process Engineer you will be required to play a first line active role in the process optimisation of existing production lines.
You will utilise lean methodologies and manfucturing process techniques to analysis process flow.
Skills and Experience -Candidates should be educated to degree or HND/HNC level in related engineering disciplines.
Previous experience with working in vehicle assembly is preferential or related engineering field. Applicants must have a strong knowledge of lean tools (Kaizan, 5S, Ishikawa, Kanban etc) and standard process improvement techniques.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Quality Systems Auditor (TS16949) - Chichester - £45k per year + Competitive market rate (KYU-104940)

Apply now

Quality Systems Auditor (TS16949)
Chichester, West Sussex, England
£45k per year + Competitive market rate

We are recruitng an excting role for a leading pretigious Automotive company based in Chichester.

As Process auditor you will complete an in depth risk analysis of all online assembly processes and provide training on quality and auditing tools and techniques.
Risk Analysis - conduct and record project team list of points for consideration or risk minimisation or removal
Establish consequence of failure and record
Proposed actions for risk removal
Experience:
Experienced auditor qualified to TS16949-2002
Extensive knowledge of automotive manufacturing processes
Knowledge of process FMEA
Able to teach quality tools and SPC
Good communication and presentation skills
Competent PC skills
Qualified to audit to ISO TS16949:2009

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Catia V5 Design Engineer (Upper Structures CAD) - Warwick (KYU-101023)

Apply now

Catia V5 Design Engineer (Upper Structures CAD)
Warwick, Warwickshire, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

We are recruiting for a Principal Engineer (Upper Structures CAD) on a 6-month contract based in Coventry with some travel to Europe and possibly India.
As Principal Engineer (Upper Structurs CAD), you will:
* Be responsible for feasibility and details layout design (3D Modelling) engineering of Body components.
* Maintain master section book
* Develop concepts to solve issues proir to engineering release.
* Perform DMU checks using Catia
* Carry out all design work on Catia V5, release 19.
Applicants must be:
* Degree qualified or have a similar qualification.
* Strong numeracy and literacy skills
* Have experience of the automotive industry.
* Capable of leading a project element with support from more senior staff when necessary.
* Effective team member, contributing to improvements and high customer services.
* Demonstrate depth of knowledge in a relevant technical speciality.
* Chartered or working toward chartered status.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Catia V5 Design Engineer (BIW Closures CAD) - Warwick (KYU-101022)

Apply now

Catia V5 Design Engineer (BIW Closures CAD)
Warwick, Warwickshire, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

We are recruiting for a Principal Engineer (BIW Closures CAD) on a 6-month contract based in Coventry with some travel to Europe and possibly India.
As Principal Engineer (BIW Closures CAD) you will:
* Be responsible for feasibility and detail layout design (3D modelling) engineering of Closures BIW components.
* Maintain master section book
* Develop concepts to solve issues prior to engineering release.
* Perform DMU checks using Catia.
* Carry out all design work on Catia V5, release 19.
Applicants must be:
* Degree qualified or have a similar qualification.
* Strong numeracy and literacy skills
* Have experience of the automotive industry.
* Capable of leading a project element with support from more senior staff when necessary.
* Effective team member, contributing to improvements and high customer services.
* Demonstrate depth of knowledge in a relevant technical speciality.
* Chartered or working toward chartered status.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Product Administrator - Middlesex (BST-105367)

Apply now

Product Administrator
Middlesex, England

A World Leader in diesel applications technologies are now looking for a Product Administrator to be based at their site in Middlesex.

As the Product Administrator your responsibilities include but are not limited to:

Coordination of trial parts orders to ensure on-time delivery with the customer.

Liaison with customer contacts and relevant sales engineers and the companies plants.

Team administration, including organisation and minuting of team meetings and presentations.

Administration of customer portal and environmental systems
Monitoring of receivables with credit control.

You will be able to demonstrate excellent administrative skills
Practical knowledge of Microsoft Office including Word, Excel, PowerPoint and Access Good communication skills (written and oral) Team player.

Well organised with good attention to detail.

Experience of logistics systems (incl. SAP) an advantage.

Working knowledge of German or other foreign language would be advantageous.

Experience within administration in automotive industry an advantage.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Project Manager - DFP Pump - Gillingham (BST-105335)

Apply now

Project Manager - DFP Pump
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a DFP Pump Project Manager to be accountable for the overall project management of multi projects involving cross functional teams responsible for the development and industrialisation of common rail pumps.

The Project Manager will report to the Diesel Program Management Director.
Main duties wfor the Project Manager will be drawn from the following:


Overall responsibility to deliver flawless project launches to meet the committed objectives and flawless launch metrics

Ownership of the projects from kick off to product launch in the plant, using the companies processes to assure the project meets both customer and business objectives for cost, quality, delivery and performance.

Develop project plans (project scope, timelines, cost, resources, risk, quality, communications and procurement) then lead and deploy overall project timing to the team.

Coordinate the cross functional teams to develop and implement plans to fit within timelines and key dates.

Conduct regular project team meetings and ensure teams are accountable for their deliverables and timelines, and manage risk escalation and resolution.

Lead and apply PDP process, PDP Gate reviews and support Engineering to run PDP Design reviews.

Support divisional initiative for tracking flawless launch of all new product programs

Prepare minutes/action plans following meetings to ensure all parties are appraised of progress at all times

Ideally the Project Manager will be fluent in German, speaking, reading and writing.

Must have excellent organisational skills, be an organised and disciplined team player who pays attention to detail.


Travel will be required to ensure customer meetings are supported and key deliverables/launches at the plant are prepared for. Therefore the successful applicant must be willing and able to travel at short notice.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electronics Project Manager - Gillingham (BST-105337)

Apply now

Electronics Project Manager
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for an Electronics Project Manager to work at either their site in Kent or London.
As the Electronics Project Manager responsibilities include:


Key customer interface for the ECU. Management of the customer to ensure that the ECU project is bound by the terms of the contract. Identify all customer recoveries.

Project manage multidisciplinary teams, acting as the key interface to customers and responsible for ensuring all customer deliverables meet their cost, time and quality targets

Definition, planning, management and co-ordination of the ECU electronic hardware and software development and validation.

Meet targets for quality, cost and delivery dates.

Work with electronics hardware PM to ensure PPAP and SOP dates and quality requirements are met.

Work with internal electronics component teams and PMs for FIE and platform.

Work with HDB electronics system and s/w architects to deliver optimum solutions reusing s/w where possible.

Ownership/management of the project budget.

Management/Electronic Systems Workpackage

Bid management. Ensure all aspects of project activity are documented, estimated and quoted to the customer.

As the Electronics Project Manager you will be degree qualified in a suitable engineering or scientific discipline.

Ideally you will have an in-depth relevant industrial experience, preferably in the automotive environment.

Project management experience along with strong IT capability using MS Word, Excel, Power Point required plus MS Project would be a benefit.



Personal strengths:-
Leadership
Team building
Interpersonal effectiveness
Communication
Presentation
Results Orientation
Planning and Organising


Understanding of diesel application and associated fuel injection equipment

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electronics Systems/Software Engineers - Gillingham (BST-105340)

Apply now

Electronics Systems/Software Engineers
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for an Electronics Systems Engineer to develop real-time electronic control systems for diesel fuel injection equipment and other integrated engine and vehicle electronic systems.

The main role of the Electronics Systems Engineer will be drawn from the following:

Ability to independently, plan and develop a product or engineering component

Experience of control strategies development in Matlab

Drive reuse and commonality where possible
Awareness and integration of Industry trends

Provide expertise for investigations and problem solving activities

Capturing and analysing customer requirements, designing control algorithms (using Simulink), designing system diagnostics and CAN communication specifications

Developing validation tests for dSpace HiL

Calibrating sensor interfaces and diagnostic strategies

Calibrating servo controls and regulators

Supporting customer s engine and vehicle testing

Supporting system and hardware FMEA


Experience in the following tools:
SPICE, Simulink, Mathworks, Engine Control, dSpace, HiL (hardware in the loop), diagnostics, CAN,
FMEA, Algorithm Development, Validation, Calibration, OBD, Requirements Analysis, Stateflow,
eCoder, MISRA, EGAS, Autocode
The Electronics Systems Engineers will be educated to degree level in electronic, electromechanical or mechanical engineering

Experience of developing real time embedded control systems with an Automotive background with solid experience of defining control strategies in Simulink.

Awareness of the SPICE assessment model and experience of a production intent auto-coding environment.

Previous experience in a customer facing technical position

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Quality Engineer - Gillingham (BST-105341)

Apply now

Quality Engineer
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Quality Engineer (AQE - SCR - Selective Catalytic Reduction) to ensure that projects fully satisfy the requirements of TS16949 and APQP.

As the Quality Engineer you will project manager on steps necessary to comply with the companies system.

To advise the project team on best practices and their application so that our target of 95% FTQ is achieved at start of production.

Supporting divisional Flawless Launch initiative

To advise the project team on all aspects of quality management
Promote excellence in Advanced Product Quality Planning (APQP).

Integrate APQP into product and process development and assist in changing the quality planning culture.

Facilitate fast and accurate two-way communication of new information and lessons learned.

Be positive, encourage, coach, lead, teach, facilitate, etc.

Help develop solutions, not just point out problems (be a coach, not a cop)

Assist project teams in the development of APQP project plans

Participate in technical reviews and design reviews

Review corrective action data, monitor status and capture lessons learned

Provide input for APQP checklists and APQP open issues list

Facilitate and support development of FMEA s

Ideally the the Quality Engineer will hold a Mechanical Engineering Degree plus industry experience.

Experience in a Quality role and knowledge of TS 16949 and APQP would be an advantage.

Project Management Skills (Preferred) Training to be provided to fill gaps.



Personal strengths should include:

Customer focused, attention to detail, self confidence, goal orientated, personal initiative and team working.

Must be able to constructively deal with conflict situations.

Ability to develop and present technical presentations to customers and others.


Must be willing to travel for training, work with customers and for problem resolution on projects as necessary

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Technical Lead Engineer - Gillingham (BST-105343)

Apply now

Technical Lead Engineer
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Lead Engineer.

As the Lead Engineer you will be responsible for a team of Engineers in the Core Engineering team who are responsible for defining the engineering content of four families of Common Rail Diesel Fuel pumps (DFP1, DFP3, DFP4 and DFP6).

This position will be responsible for the Drive Trains of all DFP products and as such will ensure synergies and commonalities between pump families will be applied, whilst functional performance, design to cost and manufacturability and quality will be achieved.

Diesel Common Rail Fuel Pumps and possible other pump related components as required.

Manage a team of engineers to ensure that clear targets are defined and tracked.

Direct the team to meet task timing using a systematic and logical Engineering approach.

Interact with critical suppliers to understand key processes and assess and approve changes to these processes as required.

Ensure that Engineering tasks are carried out to give a satisfactory level of confidence and consistency and that the results are suitably reported.

Develop/present presentations to senior management addressing the progress of key tasks.

Use failure rate analysis and statistics (e.g. Weibull) to assess risk of in-field failure.

Apply ICIM methods using DOE, 6 Sigma, Shainin and other statistical tools to achieve product robustness. (Training will be provided to fill current gaps in experience level.)

As the Lead Engineer you will hold a Masters degree in Mechanical engineering or equivalent in Physics etc. Solid experience in a leadership/management role.

Personal strengths should include: Confidence, self-directed, goal oriented, with strong team interaction skills that facilitate cross-functional involvement. DOE and statistical analysis knowledge. Must be able to constructively deal with conflict situations. Ability to develop and present technical presentations.


Must be willing to travel for training or work with plants and suppliers abroad as necessary.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Development Engineer - Gillingham (BST-105351)

Apply now

Development Engineer
Gillingham, Kent, England

A World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment and are now looking to recruit a Development Engineer to work on either a permanent or contract basis.
The Development Engineer will design, develop tests and perform tests, write test reports and analyse and present results associated with the development of a low cost common rail diesel pump for the automotive market based on a current design. Therefore they will be involved in the conceptual phase. The position will require balanced decision making and good analytical skills. Must be able to work other members of the cross-functional project team responsible for overall pump competitive success.
The Development Engineer responsibilities include but are not limited to:
In charge of the development of technical features for new common rail High pressure pump.
Developing full proofed solution to ensure that the pumps, and its components properties, are in line with the final application requirements.
Working with a multi functional team to ensure solution meets technical specification, customer requirements and compatible with DDS manufacturing and purchasing standards
Respecting overall customer project timing and cost targets
The mission will comprise of short term actions and long term development where robust design and flawless launch objectives have to be kept in line
Statistical tools and methodologies (6 Sigma, Green Y, Red X, DOE) to be applied during the development of the product.
Participate in Program Project reviews and design reviews as required.
The successful applicant will hold a degree in Engineering in mechanical engineering or equivalent with proven development engineering experience.
Experience with diesel engines and full cycle engineering design projects and effective leadership and analytical skills is required along with the ability to develop and present technical presentations to customers and others.
Previous experience/training in 6 Sigma and experience of applying Shainin would be an advantageous.

Must be confident, self-directed, focussed, innovative and visionary in developing design options and able to travel to manufacturing sites (France, Spain, and Romania).

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Software Engineer - Quality - Gillingham (BST-105353)

Apply now

Software Engineer - Quality
Gillingham, Kent, England

Delphi Diesel Systems are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Software Engineer



As the Software Engineer - Quality you will identify, drive and manage improvements in the Quality aspects of TCG Electronics activities, including Systems, Software, Hardware and Project Management. Software Process Assurance Management, Software Product Quality Management and Process Assurance.

The Software Engineer will be responsible for:

Use of problem solving techniques to satisfy quality issues/concerns.

Participation in design and project reviews.

A working knowledge of ISO 16949 and ISO 15504.

Facilitate problem solving sessions and leading process improvement initiatives.

Ensure the needs of the site Quality Organisation are met.

Perform and report local site and project audits.

Ensure that all customer identified quality issues undergo a formal problem analysis process (such as Five why).

Lead and document all formal problem solving analyses.

Manage all quality driven actions to a satisfactory conclusion.

Ensure measures of performance are defined for project and functional process performance.

Collect, collate, analyse project and functional process measures of performance and present at the monthly management meeting.

Member of the review team for formal project and technical reviews as required by Delphi processes

Must be degree qualified in Software or Electronic Engineering with experience of a similar role within the automotive sector.

The successful candidate must be comfortable working within a Software engineering environment across a number of customer project teams, leading problem solving.


Experience of Process/Software Quality, APQP, PDP, PPAP, problem solving techniques including 8D and 5WHY, CMM/CMMi, SPICE


This role offers a competitive salary + excellent benefits along with a relocation package if required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Validation Manager - Gillingham (JUM-105347)

Apply now

Validation Manager
Gillingham, Kent, England

Delphi Diesel Systems is a world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment. With many years of experience in the Fuel Injection Market. They are now looking for a Validation Manager to lead a team of validation engineers responsible for ensuring that medium duty diesel fuel injection systems released for production meet their reliability and durability objectives.

As the Validation Manager responsibility encompasses all FIE and related components to be delivered to MD customers by DDS including common rail systems and mechanical pumps and injectors.

The individual will be required to define the project system validation requirements and the validation requirements for specific products, ensuring that the agreed validation plans are executed and reported in a timely manner. In addition the customer validation activities must be monitored and recorded.


The position requires a methodical individual with attributes in planning, analytical techniques, documentation and communication skills.
The position will directly report to the Medium Duty System team manager.
As the Validation Manager you will hold an engineering degree in mechanical engineering or equivalent in physics with solid experience in development engineering or equivalent area.



DOE and statistical analysis knowledge.

Must be able to constructively deal with conflict situations.

Able to develop and present technical presentations to team members.


Personal strengths should include: people management skills, self-directed, goal oriented, with strong team interaction skills that facilitate cross-functional involvement.


Must be able to travel to global sites and customers, when required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer - Fuel Pump - Gillingham (JUM-105352)

Apply now

Design Engineer - Fuel Pump
Gillingham, Kent, England

Delphi Diesel Systems are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment and are now looking for a Design Engineer to work on either a permanent or contract basis.


As the Design Engineer you will develop concepts and detailed drawings for components used in developing a low cost CR pump for the automotive market based on a current design.

Therefore they will be involved in the conceptual phase and will be responsible for design content on components for the pump in conjunction with the Lead Designer for that pump.

The Design Engineer will also be responsible for FEA analysis and other modelling either directly or through the utilisation of other department or organisation resources.

Design and detailing of components for developing a low cost CR diesel fuel pump for the automotive market.

Apply FEA and other numerical analysis tools for the design and optimisation of the product.

Conduct competitive analysis and bench marking of competitors components for function and cost.

Conduct analysis of other leverage product areas for new ideas to advance the art in pumps (new stretch ideas)

Apply ICIM methods using DOE s, 6 Sigma, Green Y and other statistical tools to achieve design robustness. (Training will be provided to fill current gaps in experience level)

Assure GDandT and other drafting standards are applied to new component drawings.

Recommend design changes that assure the program meets cost, DFM, performance and timing goals.

Drive appropriate balancing of product performance and cost requirements with input from Lead Designer.
The Design Engineer will hold an engineering degree in mechanical engineering or equivalent with Solidworks experience including FEA analysis.

Experience of HP pump and/or fuel systems is required along with proven experience in design and/or development engineering.

Must understand and apply physics to the design.


The successful applicant must be willing to travel for training, work with customers and for problem resolution on projects as necessary.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer - Senior (Nozzles) - Gillingham (JUM-105338)

Apply now

Design Engineer - Senior (Nozzles)
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Senior Design Engineer - Nozzles to generate nozzle design solutions to meet anticipated future customers demands.

As the Senior Design Engineer you will provide innovative and competitive new nozzle design solutions to ensure that our next generation injector products are compliant with future emissions legislation and anticipated customer requirements.

Engage cross-functional support between the following groups/ resources for successful project execution:

- Design

- Simulation

- Prototype manufacture

- Hydraulic test and validation

- Engine test

- Manufacturing



Responsible for the initial feasibility phase up to proof-of-concept . Ensure efficient handover to product teams once proof of concept has been completed.



Use IandCIM methodologies to ensure that robust designs are developed.



Ensure competitive solutions are developed Collate competitor data, benchmark and formulate a competitive development roadmap.



Anticipate evolutionary and revolutionary developments and initiate plans to realise solutions.



Build-on existing competencies within advanced engineering, and to grow the team.

As the Senior Designer you will have good experience in a role where you have exercised significant influence and independent judgement on the design of precision automotive component/s from a senior decision making position.



Whilst experience with diesel fuel injection technology will be an advantage, applicants will also be considered from related technologies.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Manufacturing Engineer - Gillingham (JUM-105339)

Apply now

Manufacturing Engineer
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for an Manufacturing Engineer - Program Leader to take responsibility for the planning and coordination of the Pump Manufacturing Engineering Phase 0-2 team activities to ensure that each program launch meets the key target dates with all the ME key deliverables completed correctly ( MQ2, Capabilities, Cycle Times, Documentation etc..)

Main responsibilities of the Manufacturing Engineer will include:


Customer Programs, collect the information from within Product Engineering and Project Management , build a specification package, set a plan with Manufacturing Engineering Leaders to ensure Process readiness in due time to match customer milestone.

To set up regular meetings with the ME Leaders to review progress and to issue a regular report.

Prepare Drawing and Model packages as requested by ME Leaders to provide to suppliers.

Follow all ME Prototype and Sample Requirements to carry out the necessary trails and Machine Qualifications via DDP System.

To co-ordinate with the MEAQEs to ensure the correct level of documentation (PFD, PFMEA, CP, Standards Cell and EOP) are completed.

As the Manufacturing Engineer - Program Leader you will have strong experience as ME 0-2 Process Engineer and/or ME PH3 engineer in APU with the ability and experience to manage and participate in teamwork, plus right interpersonal communications skills


Must be self motivated with good English spoken and written.


Must be able and flexible to travel in Europe (Spain, Romania) and willing to work in an international environment.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Technician - Calibration - Gillingham (JUM-105346)

Apply now

Technician - Calibration
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment. With many years of experience in the Fuel Injection Market are now looking for a Calibration Technician

The goals of the Calibration Technician will include but are not limited to:

Assemble, strip and calibrate Rotary DI pumps (DPS/200/210/310)

Maintenance of PE1060 and Hartridge 780 test machines

Carry out other test procedures as required e.g. flow tests

Problem solving - apply a methodical and logical approach to problem solving on production and customer rejects.

Participate in production yield improvement activities.

Analyze performance data to assess suitability for production

Cross functional communication.

Participate in team orientated activities

Operate Mainframe and PC based computer systems

As the Calibration Technician you will be able to communicate effectively and present data in a clear and comprehensive manner.


Must have proven experience of running and maintaining test machines, and knowledge and experience of calibration procedures on Rotary DI Pumps.



Must have the ability to operate computer systems including Mainframe and PC based applications.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Development Engineer - Gillingham (JUM-105350)

Apply now

Senior Development Engineer
Gillingham, Kent, England

Delphi Diesel Systems are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Senior Development Engineer to work on a permanent or contract basis.

As the DSenior Development Engineer the main duties will be drawn from the following:

Plan, organise and execute performance optimisation and performance validation tests, on rig, engine and vehicle determine design improvements to develop performance.

Development of prototype assembly processes / tools

Problem solving - apply a methodical and logical approach to problem solving based on fundamental engineering principals.

Debug unexpected product behaviour and root cause analysis of failures. Devise product changes to resolve performance issues.

Reporting prepare formal written reports, summary reports and presentations to keep the team informed of status.

Contribution towards formal gate reviews.

Participate in design reviews, DFM, DFMEA workshops, product specification definition.

Specify and develop performance test facilities including test protocols

Participate in team orientated activities engage support from outside of the team where necessary to ensure team objectives are met.

Cross functional communication

As the Development Engineer you will be degree qualified in Mechanical Engineering or related discipline.

Post graduate experience in one of the following areas:

automotive component engineering, design and development, or engine calibration


Excellent communication skills are essential.

As the Development Engineer you will need to be able to communicate via reports, memos and presentations for which the applicant will need to be proficient in use of MS Word, Excel and Powerpoint.

Must be data driven not just opinion based.


Personal strengths should include:

Confidence, self-reliance, goal oriented approach, with strong team interaction skills.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Development Engineer - Gillingham (JUM-105350)

Apply now

Senior Development Engineer
Gillingham, Kent, England

Delphi Diesel Systems are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Senior Development Engineer to work on a permanent or contract basis.

As the DSenior Development Engineer the main duties will be drawn from the following:

Plan, organise and execute performance optimisation and performance validation tests, on rig, engine and vehicle determine design improvements to develop performance.

Development of prototype assembly processes / tools

Problem solving - apply a methodical and logical approach to problem solving based on fundamental engineering principals.

Debug unexpected product behaviour and root cause analysis of failures. Devise product changes to resolve performance issues.

Reporting prepare formal written reports, summary reports and presentations to keep the team informed of status.

Contribution towards formal gate reviews.

Participate in design reviews, DFM, DFMEA workshops, product specification definition.

Specify and develop performance test facilities including test protocols

Participate in team orientated activities engage support from outside of the team where necessary to ensure team objectives are met.

Cross functional communication

As the Development Engineer you will be degree qualified in Mechanical Engineering or related discipline.

Post graduate experience in one of the following areas:

automotive component engineering, design and development, or engine calibration


Excellent communication skills are essential.

As the Development Engineer you will need to be able to communicate via reports, memos and presentations for which the applicant will need to be proficient in use of MS Word, Excel and Powerpoint.

Must be data driven not just opinion based.


Personal strengths should include:

Confidence, self-reliance, goal oriented approach, with strong team interaction skills.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Applications Engineer (Rotary Fuel Systems) - Gillingham (JUM-105356)

Apply now

Applications Engineer (Rotary Fuel Systems)
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for an Applications Engineer (Rotary Fuel Systems) to work on the application and development of rotary FIE specifications from initial samples right through to production release.

As the Applications Engineer your skills required include a thorough knowledge and understanding of diesel engine performance and mechanical rotary FIE systems, combined with a practical aptitude to cope with the hands on aspects of this job.
The Applications Engineer will take responsibility for / or providing support to (depending on skills) all aspects of the mechanical rotary FIE system development on a range of off-highway engine applications.

Organise the procurement, testing and supply of sample FIE that meets the customers performance targets and project timing requirements.

Liaise with customers (including short periods at their premises) providing support to the development programmes, and give training on rotary FIE systems.

Assist with performance and production quality troubleshooting, engage with the customer and manufacturing to devise and carry out test work on rig, engine or vehicles as required.

Work with the pump / injector development teams, and Project Managers to deliver cost effective, capable products that meet the customers expectations.

The successful applicant will hold a degree (or equivalent) in mechanical engineering or related subject.

Required experience:

Experience of diesel engines and mechanical rotary fuel injection systems.

Must be self-motivated, team player with good interpersonal skills, and able to work in a multi-disciplinary group with limited supervision.

Must have the ability to work under pressure and manage several tasks at once.

Our client is also looking for a good communicator, with presentation skills, to enable liaison with internal design and development teams as well as good written and spoken fluency in English .



This position will involve some travel therefore the successful applicant must be able and willing to work away from home, and overseas for short periods.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer (Draughting/Modelling) - Gillingham (JUM-105363)

Apply now

Design Engineer (Draughting/Modelling)
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Design Engineer (draughting/modelling) to produce Solidworks models/detailed drawings for components used in Common Rail Pumps for the automotive market, which will be based on current designs in most cases.

Diesel Common Rail Fuel Pump related components as required.


Detailing of components for current and future applications of CR diesel fuel pumps for the automotive market.

Assure GDandT and other drafting standards are applied to new component drawings.

Assist the Technical Lead/Principal Design Engineer with design changes that assure the program meets cost, design for manufacture, performance and timing goals.

Assist the flawless Launch for all new product programs

Facilitate fast and accurate two-way communication with development, purchasing and process engineers to assure robust design and flawless launch objectives.

Be positive, encourage, and share knowledge with all CR pump cross-functional team members.

Participate in design reviews if required.

Ability to produce and present technical presentations at design reviews is desirable.

The successful applicant will hold an HND in mechanical engineering or equivalent and must understand and apply physics to design work.

Solid Works modelling and draughting experience.

Industry experience in design draughting in a production type environment with good knowledge of GDandT and other drafting standards.



Personal strengths should include:

Confidence, self-directed, customer focused, with good team interaction skills


This role may involve some travel for training, working with customers and for problem resolution on projects as necessary.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Validation Engineer - Gillingham (JUM-105364)

Apply now

Validation Engineer
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Validation Engineer.

As the Validation Engineer you will create, co-ordinate and maintain customer validation plans ensuring the pump is at the right place right time.

Ensure validation tests are completed to plan with optimum efficiency.

Ensure all lessons learnt / technical concerns are captured and documented and professionally tracked through to a satisfactory timely resolution.

Co-ordinate all validation activities that best evaluate product robustness to design and manufacturing process variation.

Establish analytically product life design margin, using degradation models for key pump components.

Diesel Common Rail Fuel Pumps and possible other pump related components as required.



Create/co-ordinate/maintain all pump validation plans for all customers.

Ensure pumps are on time and available for system validation tests.

Co-ordinate DV PV pump sample requirements to project managers ensuring pump delivery on time to plan.

Ensure all validation tests are continually monitored assessing rig efficiency



Communicate validation plans with validation facilities enabling rig capacity plans to be generated.

Manage and co-ordinate document design limit / process limit parts into validation tests.

Be focal point for all customer validation pumps returning to site.

Co-ordinate and document within a systematic approach pumps requiring analysis,
Be positive, encourage, and share knowledge with all CR pump cross-functional team members.

Participate in Program Project reviews and design reviews as required.

Develop and present technical presentations to Delphi team members on new or current pump tests.

As the Validation Engineer you will hold a Masters degree in mechanical engineering or equivalent in physics etc.

Must understand and apply physics to the development process.

Must be data driven not just opinion based.

Solid Engineering Experience.

DOE and statistical analysis knowledge is a plus. (Training to be provided if this is a gap).

Must be able to constructively deal with conflict situations.

Ability to develop and present technical presentations to Delphi team members.



Must be willing to travel for training, work with customers and for problem resolution on projects as necessary.

Personal strengths should include: Confidence, self-directed, goal oriented, with strong team interaction skills that facilitate cross-functional involvement.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Project / Design Engineer - South Yorkshire - £30k - 40k per year (JDW-105259)

Apply now

Mechanical Project / Design Engineer
South Yorkshire, England
£30k - 40k per year

My client part of an International Group, with a very strong engineering reputation globally, they have achieved a record order book in the previous year, and projections for the same and higher for 2012
-Offer comprehensive design and manufacturing facilities
-Specialise in the bespoke project and manufacture of large heavy plant for various indsutry sectors, including Power Generation, Nuclear and Utilities-

Job Description
-Will be working on a range of Projects across a variety of industry sectors, primarily with medium to heavy engineering projects
-The successful candidate will be primarily working on large scale bespoke Engineering projects
-Responsible for running projects from concept and design through to final commissioning and installation
-Involvement in the contract tendering and bid process working with the sales team and the external client
-Responsible for working with the design engineers to ensure all design work meets criteria from the client
-Building and developing strong relationships with external customers
-Ensuring all Projects all progressed in accordance with company standards
-Working to complete projects to both financial deadlines and financial controls

Key skills and experience
-Educated to HND level in Mechanical Engineering or relevant experience
-Strong knowledge and levels of ability on Solidworks design package
-Previous experience of Mechanical Handling equipment, lifting equipment, conveyor systems or bespoke engineering project work
-Knowledge of MathCAD would be an advantage but not essential

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Database Administrator - engine test - Rugby - £25K prorata hourly ( 100-125/day Ltd (KH-105365)

Apply now

Database Administrator - engine test
Rugby, Warwickshire, England
£25K prorata hourly ( 100-125/day Ltd

Our client is a precision low volume high performance vehicle manufacturer based East midlands, South Warks border. They are seeking a contractor for an initial 6 months to work as a database administrator
You will be responsible for creating and maintaining several engineering databases in the engine test area - databases are excel and bespoke. You will liaise with engineering depts and be proactive with data. You will upkeep test duartions, parts being used, failures etc.
GCSE in English plus A level or equivalent in maths or statistics. Experience on Excel and/or other databases PLUS knowledge of engine components is essential.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Design Engineer Agricultural Machinery - Herefordshire (RB-105359)

Apply now

Design Engineer Agricultural Machinery
Herefordshire, England

Our Client is a leading manufacturer of specialist spraying equipment for a wide range of applications worldwide. They currently export 90% of products produced at two sites in the UK. To support the continueed success the company are looking to recruit a Design Engineer preferably with experience of agricultural machinery.
The successful applicant will be responsible for

* Creation of new product designs from concept stage
* Development and testing of prototypes possibly overseas
* Specification and sourcing of materials and components
* Preparation of technical drawings for manufacturing
* Transfer of designs through to production stage
* Preparation of technical manuals and documents
* Compliance of products to international standards
* Preparation of technical files to support CE compliance
* Working as part of a design team
Ideally the successful applicant will be a degree level graduate in a relevant engineering discipline (e.g. Mechanical Engineering)

Skills and experience required include:-

* Agricultural Engineering background
* In depth knowledge of 3D CAD Design preferably Solidworks
* Should be competent in use of MS Word, Excel and Power point.
* Knowledge of manufacturing process, fabrication and techniques
* Experience of fabrication and hydraulics
* Experience in electronics and electrical engineering an advantage
* Competent communicator with good interpersonal skills

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Database Administrator - Excel User - Gaydon - £11-14/hr PAYE (KH-105362)

Apply now

Database Administrator - Excel User
Gaydon, Warwickshire, England
£11-14/hr PAYE

A new ongoing contract opportunity has arisen for a database Administrator to work at JLR Gaydon for a supplier.

- Assist in the creation and maintenance of a large Excel database containing multiple records.
- Upkeep the database with relevant data; costs, activity, budgets
- Produce whatif reports, cubed data reports for management
- create and update formulae for status reports
- reconcile invoices against activity

Role Requirements:

- Excellent Excel skills (advanced or intermediate as a minimum)
- Accounting and numeracy skills
- Business and commercial acumen
- Full Driving licence

£11-14/hr PAYE (to 16Ltd)

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Strategic Pricing Analyst - Royal Leamington Spa - £20k - 30k per year + 20K to 30K (PBU-105360)

Apply now

Strategic Pricing Analyst
Royal Leamington Spa, Warwickshire, England
£20k - 30k per year + 20K to 30K

Our client is Global manufacturer and supplier of Pneumatic components, associated equipment and assemblies.

Due to rapid growth, they have an immediate requirement for a Strategic Pricing Analyst

As such, if you feel you have the presence, background, ambition to meet and surpass the requirements below, please send your CV for consideration: Collection, analysis and evaluation of data to support the site s price strategy and route cause analysis to assist in identifying improvements and current pricing effectiveness.
Making pricing recommendations, taking into account customer value, competitive markets and production costs on Quotations and Annual reviews through Pricing Cell activity.
Support projects and business development initiatives.
Follow corporate guidelines and initiative.
Assist in the Planning and Implement of any new pricing system specified by corporate.
Produce reports for Management use including journey assessment data.
Work alongside Field sales to optimize selling prices.
Work with Internal Technical team to develop enquiry to quotation processes.
Participate in all relevant lean activity driving continuous improvement.
Travel and work from any location as and when required within the UK.
Undertake additional duties and special projects as required.

• BTEC qualification or similar in Business, Engineering, Marketing, Accounting or related field with a minimum of 2 years business experience within a related field of expertise.
• Excellent communication skills both written and verbal.
• Strong analytical and quantitative skills. Excellent P.C. skills with proficiency with Microsoft Excel, Access and formula s / Database Queries.
• Mainframe computer skills -J.D. Edwards skills desirable.
• General understand of manufacturing processes, practices and cost accounting a benefit.
• Must be able to maintain customer confidence and protect operations by keeping pricing information confidential.
• Be prepared to work from other locations on a temporary basis.
• Effective planner and organiser
• Must be able to drive

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Robot Programmer - Welding - Wednesbury - £35 - 39 per hour (KH-105127)

Apply now

Robot Programmer - Welding
Wednesbury, West Midlands, England
£35 - 39 per hour

A successful and expanding automotive tier 1 supplier of suspension and steering components is growing its technical capability and winning major new business.

They currently have an ongoing contract requirement for a specialist Robotic Programmer with experience of welding is required to improve the stability of an existing station as well as bring a new station on line.

The stations are ABB controlled MIGs (butt and fillet). You will programme for non-collision, clamping pressures, weld times, head movements, weld rod feed etc.

Note you will work in conjunction with the Welding Institute to improve the integrity of welds, but your expertise will be on the process control and programming.


Role Requirements:

- Experience of robotic control/programming for welding applications is essential (ideally ABB but will cross train)

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Component Engineer / Project Manager / PMST L405 - Banbury - £28 - 35 per hour + d.o.e (KH-105173)

Apply now

Component Engineer / Project Manager / PMST L405
Banbury, Oxfordshire, England
£28 - 35 per hour + d.o.e

A successful and expanding automotive consultancy and tier 1 supplier of chassis systems is seeking a component oriented PMST/Project Manager to manage the release, timing and delivery of chassis components. This is an ongoing contract.

An experienced Project Manager / Component Engineer from an automotive or allied sector is required to project manage the technical and commercial delivery of chassis components within the framework of the whole chassis system.

Please note, due to the nature of the project, unfortunately existing JLR workers cannot be considered.


Role Requirements:

- Good Engineering expertise either through education or experience ideally but not necessarily within automotive chassis sectors (braking, suspensions, steering, knuckles).
- Experience of working on component release within an OEM to achieve design and development technical and commercial milestones.
- Be able to compile timing plans, complete status reports
- An ideal candidate would be a Component Engineer with previous JLR systems experience.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Manufacturing/Production Engineer - CNC Machining Centres - Wednesbury - + relocation (KH-104954)

Apply now

Manufacturing/Production Engineer - CNC Machining Centres
Wednesbury, West Midlands, England
+ relocation

A successful and expanding automotive tier 1 supplier of chassis systems based North Birmingham is growing its technical capability and winning major new business.

They are now seeking to recruit an additional permanent (or will consider contract) Production/ Manufacturing Engineers that has extensive experience in 5 axis and 4 axis machining centres. A technical specialist is required for this role.

You will be responsible for

- maximising efficiency of current 4 and 5 axis machining centres
- specifying new machining centres and commissioning such
- defining process flows and cycles, tooling, fixtures, visual aids, process FMEA.
- programming Siemens controls (training will be given)

You will already have experience in a similar role within the automotive industry or perhaps be a specialist for a machine tool company, and be interested in joining a large blue chip organisation.

Role Requirements

* Excellent metal cutting expertise on CNC machining centres
* Good cutting tool expertise
* Good Fixturing and Clamping experience
* programming experience and able to cross train on Siemens controls systems
* Good gauging experience
* Has worked on PFMEAs
* Has produced process documentation
* Prepared to be Hands On (Not a desk engineer)

Desirable Attributes:

* Some assembly experience
* Good communication/project experience
* Ability to also lead small projects and/or work unsupervised to a
standard project management process

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Software Engineer - Cambridge - £30k - 40k per year + Benefits (PBU-105358)

Apply now

Senior Software Engineer
Cambridge, Cambridgeshire, England
£30k - 40k per year + Benefits

Our Client is a leading global manufacturer of innovative high-tech precision optical and image processing systems

An opportunity has arisen for a Senior Software Developer and as such we invite applications from candidates who meet the criteria below: Design and implement code for Windows applications to support auttomation, image capture from digital cameras, image processing and measurement, data storage and the linking of data and images to Microsoft Office applications.

• Strong C# is essential, along with the ability to write effective unit tests.
• Competences in C++ and SQL are highly desirable.
• Knowledge of image processing algorithms is also desirable
  
  Candidates should be able to demonstrate the ability and skills required to develop Windows applications and should have been doing this for at least three years.
  
  C# should be the principle coding language. In return the cleint offers a generous basic package, along with flexi-time, pension, private health care and Bonus

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

CNC Setter - Birmingham - 10.43/hr + 1.08 shift (£15 Ltd) (KH-105357)

Apply now

CNC Setter
Birmingham, Walsall, Wednesbury
10.43/hr + 1.08 shift (£15 Ltd)

A successful and expanding automotive tier 1 supplier of suspension and steering components is growing its technical capability and winning major new business. It is seeking a machining centre setter (not operator)on a permanent basis.

An experienced setter is required to work mornings/late shifts (6-2; 2-10) on the set up of a number of 4 and 5 axis machining centres. This is not an operator position but a true section setter position. You will set up new tooling, alter program parameters, rectify error codes and resets.
Previous experience in a setter capacity on machining centres is essential. Siemens controls are used but training will be given for Fanuc, Heidenhain or other users.

£10.43/hr + £1.08 shift allowance PAYE (£15 Ltd)

 

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

General Buyer - Gaydon - £15.80 - 15.80 per hour (GWOC-104824)

Apply now

General Buyer
Gaydon, Warwickshire, England
£15.80 - 15.80 per hour

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.

They are currently seeking to recruit 2 General Buyers, starting in January 2012.

The individuals will provide a project support role to scope out and implement the operational and contractual changes required to purchasing documentation (e.g. contracts, purchase orders) and processes for proposed changes to migrate the legal entities

The first role will be consist of a maximum of 4 weeks scoping and assisting on the implementation for a further 12 weeks (total 16 weeks).

The second role will be for 12 weeks, assisting with the implementation period.


Role Requirements:

- Understanding of potential different types of purchasing contracts and orders across a diverse company
- Good interpersonal skills to interview key purchasing staff to understand work to be done and to work with same colleagues in implementation tasks
- Familiarity with contract / purchase order documents and on how the order-placing / contract cycle works
- Ideally worked in a large purchasing / procurement / contracts department for minimum 2 years
- Educated to at least A level.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Quality Manager - Alfreton - £40k - 55k per year + Benefits (PBU-102343)

Apply now

Quality Manager
Alfreton, Derbyshire, England
£40k - 55k per year + Benefits

Our client is a world leader in the manufacture and repair of gas turbine components, and due to it`s on-going growth in the UK market is seeking to appoint an experienced Quality Manager. If you feel you meet the criteria below, please apply along with your CV for consideration

• As Quality Manager you`ll have full responsibility for the all quality activity established within the Company to include the development, update and maintenance of all documented systems and procedures, to include the Maintenance Organisation Exposition.
• Ensure that, at all times, the Quality requirements established in the Company meet defined customer approval and Airworthiness regulations are maintained and actively controlled.
• Overall authority to develop and introduce such systems and procedures necessary in order to maintain continued Airworthiness compliance, and shall be afforded the power to veto, as necessary.
• The Quality Manager will report on day to day activities to the Deputy Managing Director of the Company but as a tradition in the Company, will also continue to liaise with the Managing Director of the Company on all major quality issues and systems for final authorisation.
• Must be Degree Qualified
  
  Must have Aerospace background, Quality Experience, FAA / EASA / CAA

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Business Development Manager - Aberdeen - £35 - 42 per year + Pen + Bonus (PBU-104969)

Apply now

Business Development Manager
Aberdeen, Aberdeen City, Scotland
£35 - 42 per year + Pen + Bonus

Based at one of our clients distrubition and service centres we are looking to recruit a Business Development Manager and as such we welcome applications who meet the criteria below:

Reporting to the Sales and Marketing (UK and Eire) General Manager. Required to Identify and develop new sustainable business opportunities and develop new and existing aftermarket revenue and profitability through the management of customer relationships in the Onshore and Offshore Oil and Gas industry and its support infrastructure.

• Participate in the business planning forecast process.
• Meet / exceed Sales and Profit targets
• Assist with the development and lead the implementation of initiatives to meet the busijness object
• Provide monthly sales forecasts, activity reporting and market input.
• Maximise sales revenue and profitability of our Aftermarket Parts, Service and Equipment offerings to ensure targets are met on a monthly basis.
• Deliver customer satisfaction through effective running of accounts, communication and developing first class customer relationships.
• Review existing customer base and seek new business for allocated region and proactively seek opportunities to develop business including introducing Customer Support Plans.
• In conjunction with Service Centre Managers, develop account plans to ensure profitable business growth and deliver customer satisfaction including the delivery of planned service profitability and operational efficiency.
• Plan and manage customer visits to maximize efficiency and results.
• Introduce and co-ordinate promotional activities within given territory as required.
• Direct sales experience including the management and development of long-term, repeat-spend customer relationships.
• General business acumen and people management experience
• Strong computer skills including the use of standard office software
• Higher education in engineering discipline
• Diesel engine technical background
• Proven track record in sales and can demonstrate above average sales performance, commercial awareness and negotiation skills preferably within an engineering based industry.
• Communication / People skills.
• Working knowledge of diesel engines and their application into the relevant market place.
• Formal sales training relating to account management
• Full driving license

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Lab Engineer - Rugby - £30 - 43k per year + Bonus + Pen (PBU-104968)

Apply now

Senior Lab Engineer
Rugby, Warwickshire, England
£30 - 43k per year + Bonus + Pen

Based at our clients major manufacturing facility and the lead plant for worldwide sales of high horsepower engines, supplying international markets in the electricity generating, mining, marine and locomotive sectors.

Due to growth plans they are now looking for a Senior Lab Operations Engineer and as such we welcome applications who meet the criteria below:

In this role you are responsible for driving major test cell technology projects in the Lab Operations environment and provide effective support to minimise test cell downtime. Some level of instrumentation and controls support would also be part of the role

• Support new projects and schemes in the test environment
• Provide instrumentation and Controls support when required
• Manage and drive implementation of related technology projects in the test cell environment
• Manage new projects in the lab environment to improve capability, data quality and utilisation
• Develop improved test cell processes and methods that improve data quality
• Network with performance and mechanical development engineering to provide and receive feedback to advance the development cycle
• Write and implement capable processes for the emissions and test cell environments to capture good working practice
• Train others in the use of key test processes
• Drive troubleshooting strategy through the appropriate use of analysis tools Require highly technical background in engine test facility environment
• Experience in managing major test facility projects from concept to implementation
• Well developed experience in implementing measurement instrumentation

 Background experience:

• Experience in working in a test cell environment essential
• Controls experience an advantage
• Experience working with emissions measurement equipment an advantage
• Knowledge of emissions regulations an advantage
• Experience in engine troubleshooting and data quality management
• Previous experience in working with a test cell data acquisition system an advantage

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Product Engineer - Alfreton - £25k - 32k per year + Benefits (PBU-104766)

Apply now

Product Engineer
Alfreton, Derbyshire, England
£25k - 32k per year + Benefits

Our client is a world leader in the manufacture and repair of gas turbine components, and due to it`s on-going growth in the UK market is seeking to appoint an experienced Product Engineer. If you feel you meet the criteria below, please apply along with your CV for consideration:

. Lead New Product Introduction Projects coordinating Process Trials and reporting directly to the customer on timescale project requirements.
Ensure accurate costing estimations are provided for the development activities and production operations

• To liaise directly with customers to fully establish project requirements.
• To assist and support the commercial teams with coating and pricing activity for development trial work and final production activity.
• To work on multiple projects at any given time and to work closely with the operations and engineering teams to prioritise engineering projects in line with ever changing business / customer priorities
• To communicate directly with customers regarding project work status and associated action plans.
• Attend production meetings and liaise with Production Management to ensure planning of development trial work is effectively managed.
• To maintain familiarity with customer specification updates and support resolution of any issues that affect qualified processes.
• To accurately review customer drawings and specifications and ensure compliance when creating work instructions.
• Attend Engineering Meetings and provide input regarding status of projects and business critical priorities.
• Liaise with customer to Identify Component Specification Issues and support resolution to ensure workable process is established.
• Support and direct Laboratory regarding engineering process development trials and associated trial results.
• Manage and complete component FAIR / Source Substantiation activities, clearly identifying completion work for qualification of production processes.
• To prepare relevant process control documentation to maintain production activity.
• Effectively communicate with process operatives to ensure route cards and data cards are fully understood and workable.
• To design and procure tooling in aid of production activity or improvement work. Liaise as required with Tooling Vendors.
• To communicate and report to customers problems of a technical nature supporting Customer Services as required.
• Plan and scope project work within set time scales and liaise directly with customers reporting on status and actions.
• Produce technical reports as required during interim phases and at completion of project work.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.