Integration and Systems Validation Engineer - Bristol (888022)

Apply now

Integration and Systems Validation Engineer
Bristol, Bath, Swindon, Weston Super Mare, Chippenham, Trowbridge, Frome, Cirencester

We require an Integration and Systems Validation Engineer to undertake a full range of Integration and System Validation activities within the ISV skill area, supplying specialist advice and support across the department and projects as appropriate.

Duties include:
Trials Planning: Designing and planning trials including Air Carry Trials and Live Firing Trials to ensure that data is obtained from the trial
Trials Conduct: the conduct of trials activities such as Environmental trials, EMC/EMP trials, HWIL, Safety trials on live ordnance, Flight Trials and Live Firing Trials in both UK and overseas locations.
Trials data gathering, analysis and reporting.
Platform Integration: Integration of products onto the candidate platform including aircraft, ships and land vehicles
The design of specialist instrumentation, special to type Test Equipment, facility modification and facilities.
The conduct of lab based compatibility activities.
Missile preparation and test including live build activities.
Design Certification. Production of Design Verification Plans and Certificates of Design.
Lead engineering activities in the field for various products for customers to demonstrate system operability.
Leading demonstrations and customer acceptance trials on complex weapon systems.
Prepare trials and integration documentation at all stages of a project life cycle.
Carry out investigations into a full range of engineering problems and develop and prepare solutions, individually or as part of a team
Define testing approaches and specify tests in assigned / specialist areas

An appropriate Engineering Degree or Masters (or equivalent) OR HNC/HND level (or equivalent).
Experience of working in one of the following environments:
System Integration, Design Proving and Trials, Aircraft Integration, Naval Integration, Ground/Land Integration, Missile Test, Interface Design, System assessment and acceptance, Design Verification, Electrical / mechanical construction and interfacing, Electronic design/test.

You will able to communicate with a wide range of internal customers at both engineering and management levels. Able to communicate with sub contractors / partners/ suppliers at both engineering and management levels. Ability to and experience of generation of data and planning from a mixed set of data sources. Have good planning capabilities. Have good verbal, presentation and written communication skills. Have practical knowledge of basic systems engineering principles and processes. Be pro-active and be capable of working on their own initiative with a minimum of supervision.

The role is based in Bristol and is commutable from Bath, Swindon, Weston super Mare, Chippenham, Trowbridge, Frome, Cirencester.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Powertrain Thermal Systems Integration Engineer - Coventry (RGR-102304)

Apply now

Powertrain Thermal Systems Integration Engineer
Coventry, West Midlands, England

Based on a very attractive university campus, this centre of excellence for the development of electric vehicles offers tremendous opportunities for career development. This is a great opportunity to gain experience working in a multi-cultural environment in the UK and other locations world wide on a regular basis. This role will appeal to candidates located in Coventry, Leamington, Crewe, London, Birmingham, Warwick, Milton Keynes.

As an Integration Engineer you will be working on vehicle programmes in the area of Powertrain Thermal systems development (cooling, intake and exhaust). The job includes the following responsibilities:

• Support the programme design team in the system specification definition for the powertrain thermal systems
• Supervise cooling system flow and thermal analysis using appropriate CAE tools such as KULI or Radtherm in order to aid in the design of the cooling systems and heat management components
• Develop and manage vehicle targets, DVP and programme status documents
• Conduct testing in environmental test facilities and on development hot climate trips; this will include management of vehicle instrumentation and data acquisition as well as processing, analysing and reporting of test data.
  Candidates will need to be Degree, HND or HNC qualified, able to demonstrate strong numeracy and literacy skills and have significant experience in Powertrain Thermal systems development. Applications from more junior Engineers with relevant experience seeking a career development opportunity are also welcome.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Controls Systems Engineer MATLAB - West Midlands (887961)

Apply now

Controls Systems Engineer MATLAB
West Midlands, England

Based on a very attractive University campus, this Technical Centre was established in 2005  bringing together the best of European talent and expertise  in whole vehicle development . Employing 250 Engineers and Specialists it is now regarded as an engineering centre of excellence.  Over £85 million has been invested in the Centre since its foundation with plans for further with headcount growing to 350 this year and into next. Engaged in conventional IC engine and electric powered vehicle development, the Centre is located in Coventry, commutable from Birmingham, Leicester, Warwick, Milton Keynes, Northampton.

A great opportunity now exists for a  Control System Engineer to develop their career in a small team environment, working on challenging vehicle  thermal control system development utilising MATLAB/Simulink. The initial project is for a brand new small car platform with a range of new vehicles to follow. The work is autonomous and independent and offers the opportunity to develop the next generation of thermal / passenger comfort control technologies. Based in the UK there will also be the opportunity to work at the parent company in India for 10% of the time. You will be developing control algorithm models in MATLAB Simulink and Stateflow to meet functional specifications within the project timescale, designing and carrying out mode- based tests and developing processes for code generation and software version maintenance.

The remuneration package offered for this job is likely to appeal to Control System Engineers with 3 to 5 years experience in the Automotive or Aerospace industry.  To apply, candidates must be a minimum of Degree Qualified in Controls, Electronics or  Mechanical Engineering  with experience of system modeling using MATLAB/Simulink, together with knowledge of Embedded Systems and CAN. Experience of thermal systems isn't a mandatory requirement but a good understanding  of mechanical and thermodynamics principles would be a distinct advantage. For candidates that are able to work under their own steam, are team players with a positive can-do attitude the prospects for career development are excellent.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Aerodynamicist - West Midlands (887699)

Apply now

Aerodynamicist
West Midlands, England

We're an innovative company focused on creating the future of advanced vehicle and systems technology. Our customer focused, fully integrated approach and industry experience, together with our facilities, give us the pioneering edge to deliver ground breaking, market solutions. Based in Warwickshire, commutable from Birmingham, Solihull, Northampton, Crewe, Leicester, Northampton, Milton Keynes.

The main purpose of the job is Project Engineering Support in Aerodynamics. Promotion prospects are excellent dependent upon individual performance and business growth.
Key functions will include:
- Working alongside and supporting Senior Aerodynamicists.
- Model preparation, meshing, CFD analysis and post processing of results using commercial and in-house tools.
- Raising the profile of the business" Aerodynamics capability and helping to generate new opportunities.
- Work to strict timescale and budget constraints including close interaction with customer engineers and managers.
- Provide engineering support during wind tunnel test including design recommendations.
- Data analysis and preparation of technical reports.
Candidate requirements:
- Good first degree, a minimum of 2:1.
- Minimum of 3 years in Automotive Aerodynamics.
- Experience of organising and running wind tunnel tests.
- Three years experience with the use of CFD codes for external aerodynamics simulations.
- Proficiency in CFD model creation for complex geometries. FLUENT and OPEN FOAM CFD code experience would be an advantage.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Craftmanship Lead Engineer - West Midlands (887676)

Apply now

Craftmanship Lead Engineer
West Midlands, England

Based on a very attractive University campus, the Technical Centre was established in 2005 and now employs 250 Engineers engaged in whole vehicle development (IC and EV powered) and the manufacture of Electric Vehicles.

An opportunity for a Craftsmanship Lead Engineer reporting to the Group Chief Engineer has now arisen. Leading a team of 10, the role will have responsibility for several significant Craftsmanship projects across a range of vehicles. Candidates with a background in Craftsmanship / Perceived Quality with experience of leading teams engaged in Cubing, Dimensional Management and Benchmarking are encouraged to apply. An excellent salary, car allowance and benefits package is on offer.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Junior or Senior Engineers - Worcestershire (888252)

Apply now

Junior or Senior Engineers
Malvern, Birmingham, Redditch and Telford

A new opportunity exists for a Mechanical Project Design Engineer.This company manufactures a range of unique products and assemblies for the defence market. This new Mechanical Project Design Engineer opportunity exist in Worcestershire. It is commutable of Malvern, Birmingham, Redditch and Telford.This role could also be called Design Engineer , Senior Design Engineer or Project Engineer. Either a Junior Graduate Engineer or a more experienced Senior Engineer is required.

You will work in a team and the role will span the full project life cycle including design, development , production and customer support. You will liaise with Design, Analysis, Materials , Trials and Production Engineering as well as the customer.
Details

The Junior Engineer will be a recent graduate in mechanical or similar engineering. The Senior Engineer will be qualified to at least an HNC in Mechanical Engineering or similar. As the Senior Engineer you will ideally have knowledge of fluid dynamics, stress, metals and polymers or weapon systems or pressure vessels.. For either level of role, due to the defence nature of the business you will be a British national.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Design Engineer - Runcorn (888279)

Apply now

Senior Design Engineer
Warrington/Runcorn/Manchester

A specialist supplier to the Aerospace sector are looking for senior design engineers with conceptual design experience. The person will need tobe Degree qualified in a mechanical engineering discipline and have experience within the  design of hydraulic and actuation systems and familiar with a 3D design package.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Buyer - Loughborough - £25k - 27k per year (888062)

Apply now

Buyer
Loughborough, Leicestershire, England
£25k - 27k per year

Client Information
My client is part of a leading Multi-National Manufacturing company. The company has an established reputation as a supplier of high integrity products across it's sectors. They specialise in products for a variety of industry including aerospace, defence and energy markets

Main Duties
Will be responsible for determining demand, maintaining system data integrity and management of ordering and expediting activities in support of non-production requirements.
Will manage relationships with all suppliers, including resolving any day to day issues and support wider supply chain performance objectives


Job description
-Ensure scheduling timely deliveries from appropriate sources of supply for non-production related products and services whilst satisfying business requirements
-Manage supplier relationships to increase highly efficient performance and maintain professional working relationships internally and externally with suppliers
-Drive supplier performance and work with suppliers to improve performance and agree appropriate actions and improvement plans
-Develop methods of supply to ensure products and services are delivered in timely manner to point of use
-Work with the Strategic Procurement teams to optimise total cost of acquisition and support strategic development of our Supply Chain
-Administer purchasing requisitions, requests for quotation, purchase orders and expediting activity to ensure timely delivery of products and services at desired quality levels.


Key skills and experience
-Previous experience in Procurement/Supply Chain role
-Experience of managing supply within an Aerospace or other complex manufacturing industry
-Good negotiating and influencing skills
-Candidates should have strong problem solving skills
-Ideally CIPS qualified or US equivalent or working towards qualification
-Computer literacy including competence in Microsoft Excel, PowerPoint Word and appropriate ERP Systems

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Design Engineer-Automotive-3D Modelling-1st Tier Supplier - Oxfordshire (888262)

Apply now

Mechanical Design Engineer-Automotive-3D Modelling-1st Tier Supplier
Oxfordshire, England

This firm is a market leader in the automotive sector and provide specialist trim solutions across the world working with major automotive clients.

Their offices cover the UK and Europe and operate on projects from prototype, test, design, manufacture and production, located in rural Oxfordshire and accessible from many different locations.

We are looking for a Mechanical Design Engineer who has a high level of experience designing mechanical assemblies, ideally from the pressing industry. The role is based in an automotive supplier so automotive experience is essential (TS16949) with exposure to both clients and customers. It's an all encompassing role from initial design onwards (3D CAD capability is essential), through BOM stage, quotations, design, test and production, you'll be responsible for overall design of the product and looking after the budget for said product. FMEA/PPAP experience is essential (to include documentation) as is having worked to a "right first time" philosophy.

There is no direct management of staff involved but you will be expected to chair design and projects meetings and provide updates to other staff in relation to your project, a varied role that will offer complete design autonomy with a firm that are established and having a great 2012 so far. A permanent role with an immediate start, great salary and benefits to include 33 days holiday plus phone and laptop

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Engineer (Development) - 1630386 - Shrewsbury - 330-£35/hr Ltd Co. (887003)

Apply now

Senior Engineer (Development) - 1630386
Shrewsbury, Shropshire, England
330-£35/hr Ltd Co.

We seek a Senior Development Engineer (Drivetrain) for an initial 12 month contract based in Shrewsbury.

THE COMPANY:

Caterpillar Remanufacturing Services is located in Shrewsbury (Shropshire). Using a host of remanufacturing technologies, the facility receives engines and a range of other components from customers and cleans, refurbishes, reassembles and updates them in line with the exacting standards set by Caterpillar.

THE ROLE:

An exciting opportunity has arisen to become part of a team of engineers responsible for the development of engines and powertrains for military applications The Senior Development Engineer will be responsible for overseeing and coordinating engine development work, including pre-test planning, detailed specification and writing of testing instructions, reviewing test data to ensure quality and post-test data analysis. Roles will vary by project but could include engine calibration, system performance analysis, component development as well as paper based studies investigating new and innovative technology.

THE PERSON:

Our client is looking for an Engineer with a minimum 5 years Drivetrain Development experience.
Accredited Engineering Degree or relevant experience and demonstrated competency.
Strong understanding of engine component development.
Performance calibration experience in off-highway diesel engine components.
FMEA and 8D problem solving awareness.
Working with technologies to contribute and support development of new and legacy engines for military applications would be beneficial.
Lead technical discussions and to understand the interactions which influence powertrain performance
Present updates and information to senior levels of managements within multiple functions of the business.

THE BENEFITS:

This is a contracting position with a pay rate between £30 to £35 Ltd Co, dependent on experience.

APPLY NOW:

Your CV will be forwarded to Les Hines at Jonathan Lee Recruitment, who will treat it in the strictest confidence and keep you closely informed on the progress of your application.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Maintenance Technician - Automotive Injection Moulding - Coventry (887851)

Apply now

Maintenance Technician - Automotive Injection Moulding
Coventry, West Midlands

We are looking for a team of 2 maintenance engineers for a leading 1st Tier automotive supplier based in Coventry. The permanent roles are starting over the next couples of months and you must have experience of performing a maintenance engineer role (mechanical or electrical) with PLC (Siemens S7) knowledge.

This role is working in the injection moulding area so it is essential you have this type of experience, ideally from an apprentice or NVQ route.

TPM and PPM experience is essential. Currently, the roles are on a day pattern (0700-1530 with an early finish on Friday), however there could be a movement to shifts in the future (double days). Ideally apprentice trained or NVQ educated but this is not a pre requisite, attitude is key as the firm are very busy and need people to muck in. A very good salary on offer with great benefits including 33 days holiday and paid overtime.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Manufacturing Engineer - Turning - NX Based - Aerospace - Lincolnshire (105978)

Apply now

Manufacturing Engineer - Turning - NX Based - Aerospace
Lincolnshire, England

 

Our client acquires, develops and applies new ideas and improved components to support their customer’s products. They also offer design, development, manufacture and software services and products to the aerospace, space, energy and transport industries. 

 

The firm is very busy at the moment and this is set to continue over the year.  Having recently acquired 100% in their Revision C audit, they are a proud firm and one that is rooted in success where Quality is concerned. We are looking for a Manufacturing Engineer with a proficiency using NX and a background in Turning; ideally from the aerospace sector or a high precision automotive background.

 

You'll be turning complex parts for engines to very tight tolerances based in the manufacturing facility of the European firm. Joining the 60 or so staff, this is a pivotal position for the firm as they are extremely busy with current orders from major aerospace firms. NX proficiency is a pre requisite (version 7 ideally) to be considered for the role as is either an NVQ Level 3 or apprentice background.

 

A permanent role with an immediate start with a very friendly and busy firm that are set for 2012 and 2013 to be their busiest yet.

 

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Principal Engineer - Lancashire (887411)

Apply now

Principal Engineer
Preston/Blackburn/Manchester/Liverpool

The person will need to deliver systems engineering activities and manage engineering/manufacturing feasibility sign off for key projects. You will need to follow a structured and best practice approach to project management.
Degree qualified with a proven track record of delivering engineering projects to cost, against techncal objectives and on time.
Must have experience in practical application of systems engineering and governance processes (deliverables, milestones,gateways etc.)
Experienced in an engineering manufacturing environment within a technical sector.
Need to have excellent communication skills with strong data analysis,test planning and technical report writing.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Commodity Leader (Indirect spend) - Nottingham - £35k - 45k per year (888220)

Apply now

Commodity Leader (Indirect spend)
Nottingham, Nottinghamshire, England
£35k - 45k per year

Commodity Leader (Indirect spend)

Job Purpose

As commodity leader, you will explore and develop supply chain design in a mix of broad Indirect spend, from IT & Facilities to Energy. As this is a business undergoing rapid expansion, you will be tasked with taking control of indirect spend and you will also have expertise in commodities ensuring keen management of cost, quality, continuity of supply and overall supplier management.

The role will also be expected to provide critical inputs to the development of business and customer strategies and must ensure that Commodity Strategies adapt and influence as this rapidly growing business matures in the market.

Key Accountabilities

-          Develop and implement specific procurement strategies for each project and spend category. Ensure that supplier capacities and capabilities meet the changing needs of the business. Guarantee continuity of supply ensuring that supply chain risks are identified and mitigated.

-          Negotiate lowest total cost. Seek opportunities to leverage spend and volume to mitigate cost pressures. Understand what drives cost and own pricing models commensurate with business strategies and commitments.

-          Manage suppliers’ performance. Measure and report on performance and continuously assess and reassess the strategic fit of the supplier/commodity in line with the business need. Where necessary, expedite delivery ensuring a constant vigilance on quality and cost.

-          Work closely with business teams and peers to ensure low risk cost solutions from the suppliers. Ensure that warranty terms are flowed through the supply chain and that company processes are capable of redeeming the full value should that be required

-          Solid legal understanding. Ability to develop and construct a range of supplier contract and service level agreements.

Qualifications

-          Ideally educated to Degree level in related field.

-          Membership of CIPS by exam to a minimum of level 3, with commitment to becoming MCIPS.

Skills and Experience

-          Procurement professional. 

-          Broad indirect spend management

-          Development of strategic supplier relationships.

-          Proven record of managing multiple projects.

-          Understanding of supplier quality an advantage.

-          Experience in undertaking supplier assessments.

-          Proven record of improving existing and introducing methods and processes

-          Sound knowledge of finance including total cost of acquisition.

-          Proven experience of cost reduction and ability to monitor and analyse product cost.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Commodity Manager - Peterborough - £40k - 50k per year (888219)

Apply now

Commodity Manager
Peterborough, Lincolnshire, England
£40k - 50k per year

•Execute responsibility for global spend on identified key commodities, (Machined Components & Raw Materials), in line with the strategic direction
• Lead development of global supply chain for identified commodities, ensuring robust processes in administration and operation of the purchasing function
• Be purchasing expertise for assigned commodity group, at the component level
• Support the development of the global Sourcing Strategies for assigned commodities and assist in the creation of implementation plans and work to completion
• Implementation of Global Sourcing Strategies through the network of Suppliers in accordance with agreed timescales

• Collect supplier spend and technical data from all sites for assigned commodities
• Identify commodity savings opportunities and manage these to fruition

• Lead negotiations with suppliers for assigned commodities all global contracts, within the identified commodity groups, develop working practices and scorecard measures for global supply chain
• Interface with plant purchasing leaders in respect t issue resolution and to ensure best practice and delivery for each plant entity
• Manage Cost down activities in respect to agreed targets, pursue continual excellence in component development within the supply chain
• Achieve Commodity Cost Savings Targets for the Assigned Commodities, always looking for leveraging opportunities in the supply chain

To be considered you will need to be educated to degree standard in a related discipline or equivalent experience. Any of the following skills would be an advantage.

• Degree in appropriate discipline or demonstrated experience
• CIPS / Professional Purchasing qualification desired.
• Significant business experience preferably in Supply Management or Manufacturing Engineering
• Experience of Global Sourcing, Negotiating and Managing Complex Contracts
• Established track record with experience of strong working relationships Suppliers / people from other sites and cultures
• Good appreciation of Total Cost of Ownership Principles
• Able to demonstrate confident decision making abilities
• Good product knowledge

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Commodity Leader - Electrical/Electronics - Leicester - £45k - 52k per year (887086)

Apply now

Commodity Leader - Electrical/Electronics
Leicester, Leicestershire, England
£45k - 52k per year

Job Purpose
Explore and develop new supply chain designs in a mix of high and low volume production opportunities. Be the expert in the Commodity ensuring keen management of cost, quality, continuity of supply and overall supplier management. Initially this will be in support of new product development, ensuring that supply chain construct meets the technical demands at minimum cost and project risk. The role will also be expected to provide critical inputs to the development of business and customer strategies and must ensure that Commodity Strategies adapt and influence as the product and technology mature in the market.

Relocation is available for all successful applicants

Skills
- Sound knowledge of finance including total cost of acquisition.
- Strong Negotiator.
- Strategic perspective.
- Flexibility to understand a variety of projects.
- Strong process skills.
- Organised.
- Sound engineering knowledge.
- Attention to detail.
- Flexible in operating with global partners.
- Able to communicate with all functions within the business.

Responsible for
- Supplier relationships.
- Development and implementation of procurement strategies.
- Supply chain development.
- Negotiation of supplier agreements and delivery of value for money.
- On time delivery.

Qualifications
- Educated to Degree level in related field.
- At least associate membership of CIPS with commitment to becoming MCIPS.
- Strong Engineering appreciation, with appropriate qualifications.

Experience
- Procurement professional in an Engineering, Project and Commodity environment.
- Experience of medium / high volume manufacture, ideally in consumer electronics or automotive sectors.
- Development of strategic supplier relationships.
- Strong understanding of electro/mechanical engineering.
- Proven record of managing multiple projects.
- Proven ability to generate and maintain product cost models for production volume projections.
- Negotiation skills.
- Strong understanding of Terms and Conditions.
- Understanding of supplier quality an advantage.
- Experience in undertaking supplier assessments.
- Proven record of improving existing operations, incorporating new methods and processes.
- Proven record of cost reduction and ability to monitor and analyse product cost.
- Experienced at contracting with Global suppliers.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Chief Engineer - Automotive - Leicester - £63k - 75k per year (887048)

Apply now

Chief Engineer - Automotive
Leicester, Leicestershire, England
£63k - 75k per year

Job Purpose (brief)
To lead the specification, design, prototyping and development of power systems for automotive vehicles.
To assist in developing the technical and commercial relationship with OEM’s.
To feed the needs of the automotive vehicle applications into core systems development and operational manufacturing processes.

Responsible for (staff/equipment)
Operation of the prototype vehicles and systems in the UK and Japan.
Bench-top test equipment based in the UK.
Technical supervision of assigned Engineering and Ops resources.

Qualifications
Good engineering or physics degree.
Postgraduate qualification would be desirable but not essential

Experience
Minimum 5 years in technical leadership of product development programmes in the arenas of automotive powertrain / power systems

Skills
- A deep understanding of the European Automotive industry with previous 1st hand experience in an engineering function gained within a Tier 1 Automotive industry supplier OR an Automotive OEM
- Proficient at Microsoft Office tools or equivalent
- Understands pipeline & instrumentation schematics for fluid / mechanical systems
- Versed in the principles of Systems Engineering- Requirements Management, concept and architecture definition, optimisation through trade-studies, verification planning and execution
- Understanding of electro / mechanical device design, e.g. power generation / battery design
- Knowledge of quality management systems / document control
- Finding and building relationships with potential suppliers of components or services
- Application of fluid/thermo, mechanical, controls & electrical knowledge to the investigation of problems and the definition of cost-effective solutions
- Presentation of design work, test results & conclusions using renderings / sketches / photos
- Knowledge of quality management systems / document control
- Understanding of basic reliability and statistical analysis methods, and an ability to apply them to design of experiments.

Personal Abilities
Able to lead significant project of work, with direction of others to aid its completion, whilst reporting to end customer with major feedback.
Able to integrate, focus and inspire a highly diverse and cross-cultural team.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Materials Manager - Stamford - £38k - 45k per year (888214)

Apply now

Materials Manager
Stamford, Lincolnshire, England
£38k - 45k per year

Key to this role is to manage the supply of materials to assure timely availability of Materials in support of 100% on-time delivery to customers, including extensive external supplier contact and communication, component forecasting, scheduling and stocking processes. To manage company assets to minimise investment in inventory without jeopardising supply

• Responsible for managing and optimising all Material deliveries to support achievement of 100% on-time delivery of product through team leadership and procurement processes.
• Schedules, orders and coordinates availability with material spend of c£60m.
• Together with Material Supply Leaders, manages plant inventory resources

• Organise annual stock take for the Operations area.
• Manage 3rd Party logistics provider for Inbound and UK distribution.
• Ensures development of Supplier Relationships.
• Control of Consumable stores.

• Set and control raw inventory levels in line with business targets for world class turns.
• Manage, develop and support both the internal individuals and team as well as those based in other areas
• Lead and promote functional, company and industry standards
• Lead the Material Supply team to deliver the Materials Strategy
• Provide information and support to promote other functions to operate efficiently to the benefit of the customer and company
• Support VPI (new product introduction) to ensure it is timely and satisfactory

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Buyer - Leicestershire - £30k - 42k per year (887090)

Apply now

Senior Buyer
Leicestershire, England
£30k - 42k per year

Job Purpose
Raise and manage timely delivery of purchase orders.

Skills 

• Strong numerical and analytical skills. 
• High proficiency in data handling and good attention to detail. 
• Engineering appreciation. 
• Sound knowledge of finance including total cost of acquisition. 
• Robust process skills. 
• Strong organisational skills, with flexibility of understand and jointly manage a variety of projects.

Responsible for 

• Supplier relationships. 
• MRP maintenance. 
• Order progressing and delivery of items from a Bill of Materials.

Qualifications
MCIPS qualified or working towards.

Experience

• Buyer experience, preferably in an Engineering environment.
• Experience in MRP.
• Experience expediting suppliers to meet programme deliverables.
• Strong negotiation skills.
• Familiar with terms and conditions.
• Spreadsheet development and data management.

 

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

European Business Development Manager - Leicester - £65k - 85k per year (888164)

Apply now

European Business Development Manager
Leicester, Leicestershire, England
£65k - 85k per year

Role
Responsible for developing sales and business development activities across the Automotive sector, covering a range of products and business models and targeting clients across a number of industry sectors (including OEM, supplier and consultancy areas)

Shared responsibility for creating the business development strategy, identifying target markets, customer and sales/product offerings.

Responsible for securing engagement at the appropriate levels, developing effective commercial and technical business relationships with the client, generating sales opportunities, securing key contracts, building the sales pipeline and growing revenues.

The role will include full account management responsibilities, also being the voice of the customer within the business and being responsible for submission of commercial/technical proposals for internal approval

Develop and maintain key strategic relationships through networking within governmental and commercial entities/trade bodies etc.

Take a leading role in the strategic direction and business planning for a particular market sector.

Key Account management of existing contracts to grow further existing customer relationships.
Representation on key industry and public sector/government/influencing bodies

Experience 

• Proven track record in international business development/technical sales. 
• Experience with creating commercial terms and converting them to legal contracts. 
• Experience of significant, relevant B2B technology transactions (preferably in an automotive and/or high-technology area).

Skills 

• Proven aptitude for business, particularly on the commercial side. Excellent interpersonal skills with clear written and verbal communication. 
• Able to work independently and produce proposals and analyse complex problems and business cases. 
• Able to originate deals and take them through to contract.

A European language would be useful for the successful candidate

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Laboratory Supervisor - Alfreton - £30k - 400k per year (888155)

Apply now

Laboratory Supervisor
Alfreton, Derbyshire, England
£30k - 400k per year

Roles:
- Laboratory Manager will manage a small team organize Metallurgical EHS and quality activities and functions within the laboratory.
- Assure that all materials and processes meet the Company"s and customer requirements and specifications.
- The provision of materials, process data and control procedures for implementation by Production and Quality Control.
- You must be able to demonstrate effective communication and report writing as the laboratory will look after raw materials, intermediates and final products.

Essential:

- Experience as a Laboratory supervisor or Manager within a manufacturing environment
- Experience of problem solving, root cause analysis and corrective action tools and techniques
- Experience of working within at least an ISO9001 approved organisation, ideally an AS9100 approved organisation
- Excellent communication skills and the ability to deal with customers, both internal and external
- A self-motivated approach and a proactive attitude.


Desirable:
- Experience within an aerospace environment
- Experience working as a supplier into major aerospace engine OEMs
- Experience of Nadcap audit requirements.
- Well-versed in the tools and techniques associated with Lean and Six Sigma.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Chief Engineer - Automotive - Leicestershire - £55k - 75k per year (887053)

Apply now

Chief Engineer - Automotive
Leicestershire, England
£55k - 75k per year

Job Purpose
To lead the specification, design, prototyping and development of power systems for automotive vehicles, based on the AC family of fuel cell systems.
To assist in developing the technical and commercial relationship with OEM’s.
To feed the needs of the automotive vehicle applications into core systems development and operational manufacturing processes.

Responsible for (staff/equipment)
Operation of the prototype vehicles and systems in the UK and Japan.
Bench-top test equipment based in the UK.
Technical supervision of assigned Engineering and Ops resources.

Qualifications
Good engineering or physics degree.
Postgraduate qualification would be desirable but not essential

Experience
Minimum 5 years in technical leadership of product development programmes in the arenas of fuel cells, automotive, powertrain / power systems

Skills
- A deep understanding of the Automotive industry with previous 1st hand experience in an engineering function gained within a Tier 1 Automotive industry supplier OR an Automotive OEM
- Proficient at Microsoft Office tools or equivalent
- Understands pipeline & instrumentation schematics for fluid / mechanical systems
- Versed in the principles of Systems Engineering- Requirements Management, concept and architecture definition, optimisation through trade-studies, verification planning and execution
- Understanding of electro / mechanical device design, e.g. power generation / battery design
- Knowledge of quality management systems / document control
- Finding and building relationships with potential suppliers of components or services
- Application of fluid/thermo, mechanical, controls & electrical knowledge to the investigation of problems and the definition of cost-effective solutions
- Presentation of design work, test results & conclusions using renderings / sketches / photos
- Knowledge of quality management systems / document control
- Understanding of basic reliability and statistical analysis methods, and an ability to apply them to design of experiments.

Personal Abilities
Able to lead significant project of work, with direction of others to aid its completion, whilst reporting to end customer with major feedback.
Able to integrate, focus and inspire a highly diverse and cross-cultural team.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Commodity Manager - Derbyshire - £65k - 100k per year (888035)

Apply now

Senior Commodity Manager
Derbyshire, England
£65k - 100k per year

Our clients is a globally recognised leader for both it's delivery of high class engineering products, and technical innovation.

Due to an aggressive growth program and a significant need to achieve annualised savings we are recruiting for successful Senior Commodity Managers, who meet and surpass the requirements below:

The successful candidates will have a solid business acumen and preferably a background in management consulting, purchasing and cost excellence. Project management experience is a prerequisite and preferably you have a relevant higher education where you were at the top of your class.

You will identify and drive a broad range of procurement projects beyond and above TCO, negotiations and traditional contract management.

You will run workshops with the relevant lines of business and suppliers to bring a collective know-how to the table. You will learn and co-develop new tools and techniques that will change how the client manages and grows the supply chain

• You have a strong analytical mindset
• You are a spend entrepreneur and can demonstrate the ability to identify savings opportunities and convert them into financial returns
• You can effectively plan, prioritise, execute, and follow-up in a timely manner on your projects and anticipate problems and roadblocks.
• You have a proven track record in delivering results in favourable and unfavourable conditions.
• Outstanding communication skills are essential and you must be able to completely own and manage the engagement of senior stakeholders.

You will be expected to work closely with global suppliers, including travelling up to 40 days per annum worldwide

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Buyer - Thatcham (888234)

Apply now

Buyer
Thatcham, Berkshire, England

Xtrac Ltd is a world leading supplier of high performance transmissions, they require a Buyer to provide an effective and cost efficient purchasing service. This is an excellent opportunity to join a company that for over two decades has ensured that customers from all sectors meet, or even exceed, their targets by drawing on their unique blend of design, engineering and manufacturing capabilities. Specialising in Transmission Technology, supplying the Aerospace, Automotive, Defence, Marine and Motor Sports Sectors.

The Buyer will be responsible for the development and management of the supplier base whilst maintaining the essential balance of quality, price, delivery and availability. br
Sourcing of suppliers for transmission consumables/services including specially made to order items such as bearings, seals, springs and filters.br

Candidates will have experience within br
Manufacturing/Engineering for Motorsport, Automotive or Mechanical Engineering sectors. br
Knowledge of MS office suite is essential.br
Knowledge of business operating systems such as ERP/MRP is desirable.br

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Release Co-Ordinator - Wantage (PBA-888194)

Apply now

Release Co-Ordinator
Wantage, Oxfordshire, England

This is an outstanding opportunity to join one of the world’s most iconic brands.   

Williams Advanced Engineering, located at Williams F1 Headquarters in Oxfordshire, will provide Jaguar with a direct technology
transfer of their engineering expertise for the new Jaguar C-X75 hybrid supercar, they are now looking for a Release Coordinator Engineer. Reporting to the Powertrain Engineering Manager the candidate will be responsible for the coordinating, collating, managing & reporting out in all aspects, the
Propulsion function engineering database.

The Release Coordinator Engineer specific jobfunctions:

To ensure that the Propulsion BOM (Bill ofMaterials) is keep up to date, on a daily basis

Take responsibility & manage the Engineering Releasing (change management) activity for the Propulsion team through the development & test phases, working closely with the Engineers and other business areas

Liaise with all disciplines within the project team (primarily Engineering within Propulsion and external to, Programme, Purchase, Manufacturing, Quality, etc.) to ensure engineering data (eg. Part/Assembly structure, cost - Tooling/D&D/Piece, weight, etc.) is accurate

Collate latest data and ensure this is accurately reflected in all engineering database systems (either input directly, or through team membership)

Support Programme & Technical Review meetings, as required


Essential skills base:

Solid demonstration of experience & confidence in manipulation of complex database systems, using a number of industry/automotive standard tools, particularly through MS Excel

Ability to analyse complex databases and extract the right information from it, under constant time pressure

Ability to generating data and compiling concise summary status Reports (eg. MS Excel, MS Powerpoint, MS Word)

Candidate must be proactive and able to work on own initiative, remaining flexible at all times as they will be working in a fast
paced, motorsport biased development environment

Be a team player with strong communication and interpersonal skills, as well as good problem solving skills


Preferential competences:

The successful candidate will hold a relevant qualification in engineering (or related), Business Systems and/or Project Management would
be a strength and demonstrate regular hands on use, or experience with Siemen's PLM 'Team Centre Engineering (TCE)' software package, would be at a distinct advantage.

Use of MS Access and/or MS Project packages would be beneficial, or other dedicated database/project software

Good understanding of high technology, engineering product design & development processes & procedures:  other OEM /1st Tier Automotive industry experience would satisfy

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Development Engineer - Vehicle Integration - Grove (887975)

Apply now

Development Engineer - Vehicle Integration
Grove, Oxfordshire, England

This is an outstanding opportunity to join one of the world's most iconic brands. br
Williams Advanced Engineering, located at Williams F1 Headquarters in Oxfordshire, will provide Jaguar with a direct technology transfer of their engineering expertise for the new Jaguar C-X75 hybrid supercar, they are now looking for a Vehicle Integration Development Engineer. Reporting to the Vehicle Engineering Manager the candidate will be responsible for the delivery of Vehicle Integration of C-X75.

Candidate will be responsible for coordinating and leading the engineering activity for creation of an all new road car through CAE evaluation and verification into physical vehicle test and tuning up to Engineering Sign Off

The role will now focus on Vehicle Build problem resolution, vehicle shakedown and vehicle test. The role involves contact with all aspects of vehicle design and development with the objective being to balance functional, attribute and customer requirements to create the optimum design.

Key Responsibilities and Activities,
- Prototype build support and issue resolution
- Vehicle Functional Test and support
- Vehicle Data Logging
- Ownership of engineering issues escalation and resolution
- Ownership of CAE/Virtual assessment plan, correlation with physical test, and CAE sign off for all attributes.
- Ownership of Physical vehicle and rig test plan, including prototype vehicle definition and build.
- Ownership of prototype vehicle status documents and vehicle specification.

Degree qualifiedm candidates will be a confident, self-motivated leader with good people skills and an ability to be agile whilst delivering a high quality end product on time.
- Advanced driving and vehicle evaluation skills
- Experience of vehicle testing, and the ability to work in remote locations and deliver high quality test output.
- A good understanding of activities involved with whole Vehicle engineering from end to end of product development.
- Experience of vehicle programme delivery for OEM, Low Volume or Motorsport project.
- An understanding of how to optimize an engineering plan between CAE/ Virtual testing and physical testing.
- Candidate must have ability to work with and negotiate with other functions to achieve common objectives

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Stress Engineer - Wantage (887857)

Apply now

Stress Engineer
Wantage, Oxfordshire, England

An outstanding opportunity to join one of the world's most iconic brands within motorsport.

They require a Stress Engineer to work closely with the Design Group assisting with the optimisation of designs on both metallic and composite structures.
The Stress Engineer will be responsible for the development and validation of FEA structural models for key areas of the car such as driver controls (steering/pedals), engine systems and KERS.

The Design Group and the Stress group work closely together to develop the initial scheme and then produce detail stress analysis reports which are used for the design approval.

Degree qualified, candidates will have an in depth knowledge of structural analysis methods via hand calculations, composite analysis and non-linear FEA . Experience of NASTRAN is preferred and a working knowledge of ABAQUS is an advantage.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

ERP Systems Administrator - Thatcham (887768)

Apply now

ERP Systems Administrator
Thatcham, Berkshire, England

A world leading supplier of high performance transmissions, are now looking for an ERP System Administrator to operate as part of the IT department providing user support, system maintenance, and development of the Company's Enterprise Resource Planning System.

Responsibilities will include but are not limited to:
Work with the Head of IT to prioritise projects and schedule appropriate resources across teams. Foster cross team awareness and coordination of data and applications.
Build and maintain a good working relationship with current software vendors.
Being the Subject Matter Expert on the companies Enterprise Resource Planning System.
Carry out continual system improvement, including management of test scripts, help define scenarios, and assist in testing the system as well as quality controlling of new developments and versions of the ERP software.
Day to day system management incorporating configuration and monitoring of system parameters and performance, which may involve investigation and debugging.
Being the point of contact for support of the ERP systems will be a large part of the role, this will include the logging of all issue and resolutions, as well as assisting with the development of in-house reporting solutions.
Development of the role will lead to assessing workflow needs, identifying business requirements, suggesting change and implementing the final solution in a project managed environment.

As the ERP Systems Administrator you must have proven commercial experience to complement the high level of technical expertise that is required.
Ideally you will be familiar with Vantage/Epicor 9
Must be proactive in developing an understanding of how the company uses the ERP system.
Must have an engineering/manufacturing SME background.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Test Engineer - Redditch (887514)

Apply now

Test Engineer
Redditch, Worcestershire, England

A Test Engineer is required to join the fast expanding Electric Supercharger team. CO2 reduction technologies are creating great opportunities for fast thinking, hard working Automotive Engineers with solid Powertrain testing experience.

Key responsibilities:
Enhancement and rationalization of existing electric supercharger Design Verification Plan (DVP).
Overall management and execution of DVP utilizing both existing internal facilities, new internal facilities and externally managed facilities.
Development of key life durability tests to match different customer requirements
Development and execution of vehicle-based durability testing/mileage accumulation
Development and execution of bespoke tests to support ongoing engineering activities
Delivery of written test reports and test procedures
Analysis and summary of test results

Skill sets required:
Significant experience of Design Validation testing in the automotive sector, preferably in the powertrain arena
Self motivated with good analytical and problem solving qualities, able to work unassisted
Strong interpersonal skills and a flexible approach suitable to working within a small team
Adept at fault finding within complex test benches
Familiarity with ISO and DIN standards for automotive Design Validation testing and preferably with familiarity of different OEM standards
Project management of complex test plan with multiple test locations and providers, experience with MS Project preferable
Availability and willingness to travel to support testing (UK and France)
Working knowledge of calibration tools (e.g. ATI Vision)
Working knowledge of LabVIEW for test control and measurement
Experience of NVH and/or vibration measurement or condition monitoring would be considered beneficial
Working knowledge of automotive Quality standards and requirements, ISO 9001 ,TS 16949 and ISO 14001

Minimum requirements:
Degree qualified with experience of design validation testing preferably within an automotive environment.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Continuous Improvement Specialist - Cambridge (PBA-887278)

Apply now

Continuous Improvement Specialist
Cambridge, Cambridgeshire, England

Our client manufactures an unrivalled range of composite materials and engineered products for many industries. They are now looking for a Continuous Improvement Specialist to oversee and implement continuous improvement events throughout their global operations, including the oversight of all lean improvement activities.

As the Continuous Improvement Specialist you will manage and facilitate Lean Manufacturing, Six Sigma and Continuous improvement programs including mentoring various project leaders for Operations. Standardisation of the continuous improvement approach globally.
Analyse manufacturing techniques, procedures, and processing conditions. Make effective recommendations to plant and business team leadership and use Lean and Six Sigma tools to drive process improvements in the plants.
Track metrics to objectively and continually assess effectiveness of programs, projects, and on-going activities. Report cost improvements and performance gains to appropriate Business team.
Develop, implement, and reinforce consistent use of metrics tracking, project rating, and project reporting across the sites. Advise sites regarding proper lean tool utilization.
Conduct training at various sites, ensuring consistency of continuous improvement approaches and methods. Provide mentoring/training for Lean Events, 5S Workshops, FMEA’s, etc.

The ideal candidate will hold a  degree in a technical field such as Manufacturing, Mechanical, Chemical or Industrial Engineering; with solid experience and training in Lean Manufacturing and Six Sigma principles and techniques.
Certified Lean or Six Sigma Levels (Black Belt or Master Black Belt preferred)
Demonstrated experience implementing continuous improvement programs with measurable results.
Proven ability to manage and direct cross-functional technical/project teams.
Ability to develop, evaluate, and manage process parameters for manufacturing composite or related materials.
Strong proficiency with current MS Office software and statistical analysis software, such as Minitab, CrystalBall, or LIMS.
Strong oral and written communication skills to support interactions with all levels of the organization.
Multiple language capability desired for English, French, German, and Spanish but not required.
This role requires 50+% travel therefore the successful applicant must be willing and able to travel within the UK and abroad.
Candidates must be able to satisfy ITAR requirements.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Project Engineer - Thatcham (PBA-887107)

Apply now

Project Engineer
Thatcham, Berkshire, England

A world leading supplier of high performance transmissions, require a Project Engineer to manage designated Automotive and Engineering customer orders and projects. This is an excellent opportunity to join a company that for over two decades has ensured that customers from all sectors meet, or even exceed, their targets by drawing on their unique blend of design, engineering and manufacturing capabilities. Specialising in Transmission Technology, supplying the Aerospace, Automotive, Defence, Marine and Motor Sports Sectors.

As the Project Engineer duties will include:
Establish, maintain and manage a strong working relationship with new and existing customers, at all levels.

Manage inventory for project, to ensure customer requirements and commercial needs.

Provide to the customer technical documentation to include parts lists, manuals, technical bulletins and assembly drawings, where appropriate.

Manage customer projects throughout the business in a co-ordinated, focused, structured and well controlled manner. Build and develop relationships internally with other members of the Project Team, in particular Manufacturing Project Managers and Design and Engineering

Liaise with the Stores Department to despatch assemblies and components, to include the method of despatch.

Liaise with the Accounts Department and the Customer to ensure that the account is kept up to date, and within agreed credit limits

The successful applicant will be a student of Aeronautical, Automotive, Mechanical Engineering or similar degree, currently in their final year of study or recently graduated.

Ideally with experience of customer management, commercial and project management you must have excellent organisational skills, able to work to tight deadlines and be able to build strong working relationships with a flexible approach to work.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Lean Change Facilitator - Surrey (PBA-886989)

Apply now

Lean Change Facilitator
Surrey, England

A leading manufacturer of Personal and Respiratory Protective Equipment  are now looking for a Lean Change Facilitator to assist the Head of Operations in a lean manufacturing transformation.

Main duties and responsibilities:
- Develop and implement the lean transformation process.
- Manage and facilitate continuous improvement activities.
- Help develop the performance measurement system.
- Support the Operations Manager in all aspects of the operation functions.

Qualifications and experience:
- Ideally an Automotive background and preferably degree qualified.
- Hands on experience leading at least two lean transformations in a batch production plant or department, including:
- Determining the future work flow using value stream mapping or process mapping.
- Developing and implementing work cells.
- Managing Kaizen events.

Personal attributes:
- Analytical with good attention to detail
- Systematic (process driven)
- Strong communication skills.
- Able to work with little supervision (self-driven).

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Catia V5 Design Engineers - Exterior Trim - Coventry - Contract Rates Apply (888011)

Apply now

Catia V5 Design Engineers - Exterior Trim
Coventry, West Midlands, England
Contract Rates Apply

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

They are currently seeking to recruit a team of Principal CAD Engineers within Exterior Trim for a key vehicle project.

The team will be responsible for the following areas:

- Exterior Trim Ornamentation Systems (bumper systems, under-body protection systems, heat shields, wheel arch liners etc)
- Exterior Plastic Mouldings (leaf screen, pillar trims, badges, brightware etc)
- Exterior Trim Wiper Systems
- Exterior Trim Glazing Systems

Duties to include:

- Feasibility and detailed design (3D Modelling) engineering of exterior components
- Maintaining master section book
- Development of concepts to solve issues prior to engineering release
- Perform DMU checks using Catia V5 and Vismockup
- Maintenance and release of exterior trim systems within PLM system

ROLE REQUIREMENTS:

- Degree qualified or similar qualification
- Minimum of 5 years automotive experience is essential.
- Strong numeracy, literacy and logical reasoning skills
- Detailed knowledge and experience of relevant exterior trim systems
- Demonstrate depth of knowledge in a variety of production and prototype manufacturing methods
- Ability to work with local and remote colleagues
- Effective team member contributing to improvements and high customer service
- Flexibility to apply themselves to a wide variety of tasks as required

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Chassis Support Launch Engineer (BT296) - Coventry - Contract Rates Apply (888093)

Apply now

Chassis Support Launch Engineer (BT296)
Coventry, West Midlands, England
Contract Rates Apply

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

They are currently seeking to recruit a Chassis Support Launch Engineer on a 6 month contract basis. The role will be based at a vehicle assembly plant, so travel may be required between plants, suppliers and the main site in Coventry.

The individual will work as part of the engineering launch team, reporting to the Chassis Lead Engineer and will be responsible for the following:

- Chassis engineering launch support activities.
- Coordination of activities to ensure robust delivery of chassis components and systems.
- Resolution of launch issues directly where appropriate or through escalation to the chassis engineering team where applicable.
- Liaise with manufacturing and/or other engineering disciplines and deliver holistic resolutions to issues.
- Coordination of Change Management (Release), Issue Management (AIMS), Rework instructions for post build vehicle updates and Component deviations prior to and during build.
- Coordination and reporting of status and issues throughout the on-line build process
- Support and liaise with suppliers and customers during project activities regardless of location.

ROLE REQUIREMENTS:

- Degree qualified or similar qualification
- Excellent communication skills at all levels
- Effective negotiator and motivated self starter
- Strong literacy, numeracy and logical reasoning
- Innovative and versatile and able to balance multiple requests and support requirements
- Effective team member contributing to improvements and high customer service
- Demonstrate depth of knowledge in chassis systems.
- Component and programme delivery experience
- Ability to work under pressure of delivery
- Proficient in the use of MS Powerpoint, Word, Excel and web based applications
- Knowledge of change management processes, AIMS, WERS, PACN
- Knowledge of GPDS / FPDS
- Manufacturing and product development experience.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Powertrain Project Engineer - Gaydon - £22.40 - 22.40 per hour (104957)

Apply now

Powertrain Project Engineer
Gaydon, Warwickshire, England
£22.40 - 22.40 per hour

Undertake powertrain research projects which include internal, research partners, suppliers, Universities and governmental participation. An initial project will investigate the design, procurement and testing of a novel engine design concept. Work with core engineering teams, suppliers and internal customers to ensure system targets are defined and delivered. Management of relationships with system suppliers and partners within new technology programmes.

Skills Required:
Good communication, Project Management skills, self motivated, enthusiastic and a good team player. Demonstrable skills in supplier liaison and communication. Resolution of complex technical problems through application of system engineering principles.

Experience Required:
Experience in Powertrain technology. Base engine, friction and crank train Engine design or development experience. Good analytical skills and PC skills including Microsoft Office and MSProject.

Education Required:
Engineering degree essential.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Continuous Improvement Leader - Derby - £35k - 45k per year (887912)

Apply now

Continuous Improvement Leader
Derby, Derbyshire, England
£35k - 45k per year

Continuous Improvement Leaders    £35-42000 + benefits

Our clients is a globally recognised leader for both it’s delivery of high class engineering products, and technical innovation.

Main role

To lead and facilitate supplier improvement projects to develop and improve the external supply chain performance in terms of Quality, Delivery, Cost and Capability.

Key responsibilities

• Operate and Develop Existing Supply Chain Performance process as required.
• Implement projects as part of improving the performance of a business, through the application of appropriate LEAN & Quality improvement tools.
• Quantify the financial impact on operational cost performance, and agree benefit with supplier.
• Train and coach suppliers to improve aspects of their business performance.
• Manage improvement charters to deliver agreed objectives “on-time” and “in-full” within nominated supply chain.
• Develop supplier capability to meet current and future requirements.
• Manage and influence multiple stakeholders.

Skills

• Proven track record of application of Lean & Quality improvement processes and tools.
• Proven ability to manage multi problem investigations simultaneously.
• Demonstrated passion for process design and continuous improvement. 
• Manufacturing process knowledge.
• LEAN & DMAIC process knowledge
• Practical Problem Solving.
• Value Stream Mapping

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Cost Reduction TVM Project Engineer - Coventry - £22.40 - 22.40 per hour (887612)

Apply now

Cost Reduction TVM Project Engineer
Coventry, West Midlands, England
£22.40 - 22.40 per hour

Cost Reduction TVM Project Engineer to work in the Powertrain department.

Skills Required:
Self motivated and driven. Good communication skills and ability to deliver results quickly in a challenging environment. Must be able to engage individuals at all levels of the business and chair progress meetings with managers, to drive projects through to delivery. Must be able to compile and present high quality reports for management consumption. Good basic financial acumen, Investment costs, RandD costs, Material cost, rate of return. Capable in Microsoft tools, particularly Excel and PowerPoint. Microsoft Project an advantage. Previous exposure to OEM releasing systems, such as WERS, would be an advantage.

Experience Required:
Managing the delivery of complex engineering lead projects in a challenging environment, automotive, aerospace or similar. Experience in a value management and cost reduction environment (TVM) a benefit. Experience of supplier management and/or assembly manufacturing experience a benefit. Previous experience of OEM programme management and releasing tools including WERS would be advantageous.

Education Required:
Degree preferred, but not essential. Educated to HND/HNC level is a minimum requirement.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

EPMT Project Management Engineer - Coventry - £22.40 - 22.40 per hour (887129)

Apply now

EPMT Project Management Engineer
Coventry, West Midlands, England
£22.40 - 22.40 per hour

Project Management Engineer to support EPMT leaders. Responsible for ensuring programme delivery to all timing and functional requirements. Key activities will be the planning and delivery of prototype builds, maintaining programme metrics and reporting status at both internal and external (Vehicle Team) Project Reviews.

Skills Required:
Ability to lead the resolution of business, technical and process issues within a project team environment. Good communication, interpersonal skills, and a sense of self confidence.

Experience Required:
Experience of project and/or supplier management , meeting demanding timescales, budget control and desire to work as a team delivering a robust project/product.

Education Required:
Educated to degree level, or higher, in a relevant field or subject.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Quality Engineer - 1808292 - Stockton-on-Tees - £28.50/hr Ltd Co. rate (888256)

Apply now

Quality Engineer - 1808292
Stockton-on-Tees, County Durham, England
£28.50/hr Ltd Co. rate

We seek a Quality Engineer for an ongoing contract based in County Durham.

THE COMPANY:
Caterpillar Articulated Trucks is located in Peterlee (County Durham). The facility"s manufacturing activities utilise the latest computer analysis techniques, robotic technology, and a "state of the art" paint plant along with rigorous attention to quality. Machines are shipped from the site to customers around the world, typically used in the aggregates and mining industries.
THE ROLE:
AS Quality Engineer, you will be responsible for supporting their Quality Management System for a business division. Advise operations teams on production and product issues based on customer feedback through investigation, analysis and team leadership to resolve quality issues and drive continuous improvement. Exercises independent judgment with direction from supervisor.
Major Job Duties and Responsibilities:
- Performs Quality Assurance for a business division by performing product test procedures
- Validating product specifications
- Performing audits, and leading product reliability improvements via New Product Introduction program and Continuous Product Improvement programs.
- Develops plans and tools to support quality systems and related processes for a business division.
- The incumbent provides support for quality programs and certifications, as well as Lean Manufacturing and systems implementations.
- Supports business division employees tracking continuous quality improvement projects and a quality scorecard
- Leading internal quality programs
- Developing related training programs,
- Conducting internal quality audits and facilitating management reviews.

THE PERSON:
Applicants must have a strong manufacturing background ideally within fabrications supported by process application and development knowledge. Act as a technical focal point for fabrication supplier activities directed towards process control and quality assurance. Work closely with internal departments such as NPI, Supply Chain and Production. Results orientated problem solver with excellent project management and communications skills. Experience Essential In depth knowledge of APQP and PPAP New product Introduction involvement Project Management experience Ability to read and understand Engineering Drawings.
Minimum 5 years in a quality role Good communication skills Dealing with people at all business levels Available to travel Preferred Experience / qualified Lead Auditor (minimum ISO 9001 : 2008) Light Fabrication production background Supplier development Six Sigma experience
Education/Experience:
A degree in an engineering or manufacturing-related discipline (or equivalent). Some relevant work experience. Prior experience working in a manufacturing environment and/or in the quality field - preferred.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principal Engineers - CAD Interior Trim - Coventry - Contract Rates Apply (888013)

Apply now

Principal Engineers - CAD Interior Trim
Coventry, West Midlands, England
Contract Rates Apply

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

They are currently seeking to recruit a Principal Engineer - CAD Interior Trim. This role will be based at their site in Warwick. Reporting to the Chief Engineer - Interior Trim, the individual will be responsible for the following:

- Feasibility and detail design (3D Modelling) engineering of Trunk Trim System components.
- Maintaining master section book.
- Development of concepts to solve issues prior to engineering release
- Performing DMU checks using Catia and VizMockup.
- Maintenance and release of Trunk Trim system within PLM
- All design work carried out on V5.

ROLE REQUIREMENTS:

- Degree qualified or similar qualification
- Minimum of 5 years automotive experience is essential.
- Strong numeracy and literacy
- Detailed knowledge and experience of bumper systems and underbody protection systems eg undertrays, heat shields, wheel arch liners
- Demonstrates depth of knowledge in variety of production and prototype manufacturing methods.
- Effective team member contributing to improvements and high customer service
- Demonstrate depth of knowledge in a relevant technical specialty

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principal Engineers - CAD Exterior Trim (BT278-BT283) - Coventry - Contract Rates Apply (888011)

Apply now

Principal Engineers - CAD Exterior Trim (BT278-BT283)
Coventry, West Midlands, England
Contract Rates Apply

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

They are currently seeking to recruit a team of Principal CAD Engineers within Exterior Trim for a key vehicle project.

The team will be responsible for the following areas:

- Exterior Trim Ornamentation Systems (bumper systems, under-body protection systems, heat shields, wheel arch liners etc)
- Exterior Plastic Mouldings (leaf screen, pillar trims, badges, brightware etc)
- Exterior Trim Wiper Systems
- Exterior Trim Glazing Systems

Duties to include:

- Feasibility and detailed design (3D Modelling) engineering of exterior components
- Maintaining master section book
- Development of concepts to solve issues prior to engineering release
- Perform DMU checks using Catia V5 and Vismockup
- Maintenance and release of exterior trim systems within PLM system

ROLE REQUIREMENTS:

- Degree qualified or similar qualification
- Minimum of 5 years automotive experience is essential.
- Strong numeracy, literacy and logical reasoning skills
- Detailed knowledge and experience of relevant exterior trim systems
- Demonstrate depth of knowledge in a variety of production and prototype manufacturing methods
- Ability to work with local and remote colleagues
- Effective team member contributing to improvements and high customer service
- Flexibility to apply themselves to a wide variety of tasks as required

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principal Engineer - Protection Systems (BT277) - Coventry - Contract Rates Apply (888009)

Apply now

Principal Engineer - Protection Systems (BT277)
Coventry, West Midlands, England
Contract Rates Apply

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

They currently have a 6 month contract opportunity for a Principal Engineer for Protections Systems for a key vehicle project.

This role is based predominantly at their site in Warwickshire, although travel overseas may be required to support the programme.

Working within the Body and Trim Engineering Department, the individual will be responsible for delivery of derivatives of a small car for the European and Indian Markets.

It covers protection systems for Bumpers, Sills, Shields, Grilles and Wheel arch liners

ROLE REQUIREMENTS:

Candidates must have experience of the following:

- Automotive Exteriors project lead
- Protection Systems knowledge (bumpers, sills, shields, grilles, wheel arch liners)
- Experience of design for prototype
- Technical Leadership
- Self sufficient
- Able to communicate well with the customer and team in house
- Able to lead the CAD team from a technical point of view

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principal Engineer - Ornamentation (BT276) - Coventry - Contract Rates Apply (888007)

Apply now

Principal Engineer - Ornamentation (BT276)
Coventry, West Midlands, England
Contract Rates Apply

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.

They currently have an ongoing contract opportunity for a Principal Engineer for Ornamentation for a key vehicle project.

The individual will be based predominantly at their site in Warwickshire. Reporting to the Lead Engineer, the individual will be responsible for the following:

- Deliver exterior trim ornamentation system components on time and to budget on the X4 programme
- Lead the exterior trim ornamentation system team
- Drive closure of issues and establish cost/ timing impact
- Support the engineering deliverables through to engineering sign off of the vehicle
- Manage engineering ETRS and engineering change tracker
- Management of parts procurement, manufacture and assembly

ROLE REQUIREMENTS:

- Degree qualified or similar qualification
- Minimum of 5 years automotive experience is essential.
- Strong numeracy, literacy and logical reasoning skills
- Detailed knowledge and experience of ornamentation/exterior trim systems e.g. pillar trims, leaf screens, badging etc
- Demonstrate depth of knowledge in a variety of production and prototype manufacturing methods
- Ability to work with local and remote colleagues.
- Capable of leading a project element with support from more senior staff when necessary
- Effective team member contributing to improvements and high customer service
- Flexibility to apply themselves to a wide variety of tasks as required

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Design Engineer - 1735946 - Leicester - £28.50/hr Ltd Co. rate (888248)

Apply now

Design Engineer - 1735946
Leicester, Leicestershire, England
£28.50/hr Ltd Co. rate

We seek a Design Engineer for an initial 12-month contract based in Leicester.

THE COMPANY:

Caterpillar Building Construction Products (BCP) is located in Desford (Leicestershire). This site is dedicated to the assembly of small construction machines, typically used on building and construction sites. These include Backhoe Loaders, Small Wheel Loaders, Mini Hydraulic Excavators and Compact Wheel Loaders.

THE ROLE:

As Design Engineer, you will have a varied and exciting role creating new designs from concept through to detailed design ensuring the parts are validated and meet the functional requirements.
The candidate will be responsible for the production release of the parts and expected to work with suppliers to ensure the parts can be manufactured and meet the cost and quality targets.
The successful candidate will need to be flexible and be able to work on multiple areas of the machine i.e. structural fabrications, non-metallic components and cab interior.
Critical to the success of the role will be an enthusiastic attitude showing the initiative to solve engineering problems and be able to work to tight deadlines.
As part of this role, communication with other design centres will be required for worldwide design collaboration.

THE PERSON:

Applicants will be required to have:
- Machine engineering design experience.
- Computer literate with Pro-E CAD engineering skills
- Experience in designing structural fabrications and non-metallic components.
- Knowledge and experience of problem solving analysis.
- Knowledge of CAT Engineering process's, CAT drawing standards, specifications, and Teamcentre workflow is desirable.
- Experience of Off highway equipment or other heavy machinery
- Ability to self-direct but also work effectively in a diverse team environment.
- Engineering / Science Degree or equivalent industry experience

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.