Jonathan Lee Recruitment Automotive Jobs: 08/05/2011

Friday 13 May 2011

Embedded C Software Engineer - Surrey (JUM-100492)

Apply now

Embedded C Software Engineer
Surrey, England

Our client design and develop electronic control systems for use in harsh environments such as aerospace and automotive. They have been supplying control and data acquisition systems to these or similar industries for a number of years. These systems comprise of standard electronic units, software, alternators, and components, but special parts can be provided. They can often help to transform specific ideas or requirements into new parts to satisfy a particular sensing or actuation demand.
Our client has a requirement for an Embedded C Software Engineer to support the development activities for electronic control systems specifically within our BIOS development team. The team is responsible for the design and implementation of our next generation series of complex multi processor engine control and data acquisition systems.
The Embedded C Software Engineer will have proven experience with the design process from concept to design, implementation and test.
Experience for software design for safety critical systems.
Ability to understand and resolve problems at both system and code level.
Extensive project experience of developing high quality C and Assembler for embedded systems.
A team player with the ability to work to tight deadlines in a multi-discipline, multi-project environment.
Self motivation.

Technical Experience Required:
Freescale Power Architecture processors: MPC8xxx PowerQUICC III, MPC55xx Automotive microcontrollers.
Register level configuration of on-chip peripherals and memory management for the above devices including CPM, MMU, DMA, eTPU, eQADC, eMIOS, CAN.
Logic analysers/scopes/test equipment.
RTOS and interrupts

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer - Gillingham (JUM-95425)

Apply now

Design Engineer
Gillingham, Kent, England

Delphi Diesel Systems are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment, with many years of experience in the Fuel Injection Market. They are now looking to recruit a Design - Development Engineer to optimise the design and refine performance of brand new Emissions technology.
The Design Development Engineer will be responsible for:
The design and performance optimization of a new emissions reducing doser, with the main focus on the nozzle.
Preparation of design specifications; drawings and written specifications. Facilitate fast and accurate two-way communication with development labs and suppliers / process engineers to assure robust design and flawless launch objectives.
Planning and execution of performance optimisation tests determine design improvements to develop performance.
Apply ICIM methods using DOE s, 6 Sigma, Green Y and other statistical tools to achieve design robustness. (Training will be provided to fill current gaps in experience level).
Ideally the successful applicant will hold a degree in Mechanical Engineering (or equivalent Aeronautical Engineering/ Automotive Engineering) with design/development experience within an automotive environment.

Fully conversant with engineering drawing practices, including geometric tolerancing.
Be able to understand and be able to apply physics to the design.
Must be innovative and visionary in developing design options. Solid Works experience.

Must be willing to travel for training.

Development Engineers - Gillingham (JUM-99320)

Apply now

Development Engineers
Gillingham, Kent, England

Delphi Diesel are a World leader in the innovation, design and manufacture of Diesel Fuel Injection equipment. They are now looking to recruit Development Engineers to support the design, testing, preparation of tests and the analysis and presentation of results associated with the development of a new common rail diesel fuel pump for the automotive market.
The Development Engineers will be responsible for the development of components for a new common rail high pressure pump. Developing full proof solutions to ensure that the pumps, and its components properties, are in line with the final application requirement.
Working with a multi functional team to ensure the solution meets the technical specification, the customer requirements and to be compatible with manufacturing and purchasing standards.
Statistical tools and methodologies such as 6 Sigma, Green Y, Red X and DOE will be applied during the development of the product. You will also participate in Program Project reviews and design reviews as required.
The successful candidates will hold Engineering degrees in mechanical engineering or equivalent and ideally will have proven experience in development engineering.
Candidates with previous exposure, either pre or post graduate, to Powertrain related projects will also be considered.
You will have the ability to travel to manufacturing sites (France, Spain, and Romania).

Validation Engineer - Gillingham - £Negotiable (JUM-99364)

Apply now

Validation Engineer
Gillingham, Kent, England
£Negotiable

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Validation Engineer to create, co-ordinate and maintain customer validation plans ensuring the pump is at the right place at the right time.
Responsibilities also include but are not limited to:
Ensure validation tests are completed to plan with optimum efficiency.
Ensure all lessons learnt / technical concerns are captured and documented and professionally tracked through to a satisfactory timely resolution.
Co-ordinate all validation activities that best evaluate product robustness to design and manufacturing process variation.
Establish analytically product life design margin, using degradation models for key pump components.
The position requires a methodical organised individual with attributes in planning, analytical techniques, documentation and communication skills.

Senior Buyer - United Kingdom - £20.20 - 23.20 per hour + �23.16 per hour (DRP-100650)

Apply now

Senior Buyer
United Kingdom
£20.20 - 23.20 per hour + ?23.16 per hour

Part of a global organisation, this well established manufacturer of luxury vehicles is currently enjoying success within the market place. They have invested over 200m in new equipment and are at the forefront of modern manufacturing practices.
Aftermarket Purchasing.
Main responsibilities would include:
Managing supplier relationships in regard to aftermarket supply . Strategy planning.
Controlling all expenditure related to Aftermarket including Engineering, Design and Testing, Prototypes, Tooling, and Goods/Services.
Developing, along with the TVM buyers, opportunities to improve design, cost and quality.
Benchmarking existing product and analysing market trends. Annual cost improvement negotiations. Identifying Emerging Market Sourcing opportunities in countries such as Brazil, Russia, India and China.
Skills Required:
Good level of IT competence in programmes such as SAP, Excel and Word and a high level of numerical and analytical competence are essential.
Must demonstrate ability to build effective cross functional relationships. .
Skills Preferred:
Excellent communication skills, influencing and negotiating skills.
Aptitude to operate effectively within a challenging environment. Attention to detail is essential as they will be required to adhere to complex processes.
Experience Required:
Preferably proven Aftermarket Purchasing experience.
An understanding of the automotive procurement marketplace.
A demonstrable commercial business awareness

Operations Quality Engineer (Maternity Cover) - Cambridge (BST-100548)

Apply now

Operations Quality Engineer (Maternity Cover)
Cambridge, Cambridgeshire, England

Operations Engineer (Marking Materials) - Cambridge - Up to £42K (BST-100562)

Apply now

Operations Engineer (Marking Materials)
Cambridge, Cambridgeshire, England
Up to £42K

Our client has an established global reputation for the continual development and manufacture of its total coding and printing technologies that meet the needs of manufacturers and sets new industry standards in quality and reliability.
They are now looking for an Operations NPI Engineer (Marking Materials) to work with the Development and Manufacturing team in the creation of new group wide products and to ensure that all new products are developed and introduced into manufacture effectively and efficiently. Liaising between the suppliers, internal manufacturing teams and the development team to bring about continuous improvement in Marking Materials, during new product introduction. You will ensure that the highest level of quality and process effectiveness is built into manufacturing.
As the Operations Engineer you will be responsible for the following:
Lead and take part in Design and Process FMEA s.
Approve engineering drawing, Bills of Material and component specifications
Identification, audit and approval of suppliers to suit the required technology
Management of BoM cost to target including supplier negotiation
Prototype material procurement and quality development through to PPAP completion utilising statistical evaluation
Contract negotiation and completion
The generation of new assembly and test instructions.
Planning of above activities to ensure timely completion in line with gateway reviews
The successful applicant will hold an honours degree or equivalent (i.e. recognised status
by a professional institute), preferably in manufacturing, quality or production engineering, with proven experience in a manufacturing environment. Ideally you will have experience of process industry manufacturing and particular experience of ink manufacturing would be an advantage. You will understand best practice approach to variation reduction and ideally would be qualified to at least 6 sigma green belt level.

You will be flexible, a level thinker and capable of solving wide-ranging technical problems with a firm character and be able to work as a team member or alone as the situation demands. You will be able to communicate with people at all levels in the organisation and complete tasks on time using appropriate planning tools with the minimum of supervision.

Flexibility with travel is essential as the development and manufacturing sites are split between Cambridge and Liverpool and it is estimated that you will split your time between them. Other plants in Asia and USA may also require visits from time to time.

Production Planner - Essex - £23k - 28k per year (BST-100528)

Apply now

Production Planner
Essex, England
£23k - 28k per year

Our client is a global leader in the design, manufacture and supply of vehicle control systems, providing quality engineered pedal systems, steering systems, electronic displays and cable controls to the world s foremost manufacturers of commercial, industrial, agricultural and construction vehicles.

They are now looking for a Production Planner to take ownership of the value stream map for the Architectural / Kantrak side of the business.
The successful candidate will also be responsible for:
Carrying out Production Planning functions, setting and owning the Production Plan for allocated Strategic customer Base.
Receive and process onto operating system customer orders, in a timely manner
Ensure contract review of all orders is carried out for other Strategic Customers
Prepare operating system input relating to newly acquired customer accounts
Provide product and / or service information.
Resolve customer requests for adjustments to orders and invoicing.
Record customer complaints to ensure measurement and improvement.
Work on varied and complex customer service assignments.
Confer with management concerning the resolution of any difficult issues.
Provide quotations service to customers.
Maintain awareness of, and contribute to, business KPI s.
Assist in continuous improvement opportunities and programmes.
Perform other related duties as assigned by management.

As the Operational Planner you will have the ability to communicate well, laterally and vertically within the organisation. You will have strong organisation and planning skills along with good influencing skills when dealing with customers and internal departments
Exposure to financial and budgets with a general understanding of a Lean Culture

Use of computers; Microsoft Office software, with some familiarity of MRP software systems
Ability to use Web based customer sites

Paint Shop Engineer - Halewood (BST-100286)

Apply now

Paint Shop Engineer
Halewood, Merseyside, England

Part of a global organisation, this well established manufacturer of luxury vehicles is currently enjoying success within the market place. They have invested over 200m in new equipment and are at the forefront of modern manufacturing practices. An Engineer is required to work within the Paint Shop Halewood Operations plant.. The role will involve responsibility for the processes that are used to build the cars within a specific area of the Paint Shop. The role will also involve driving the main business metrics within the plant Safety, Quality, Cost, Delivery, People, Environment and using problem solving tools to resolve build issues. This is mainly a day shift role but two shift working may be required to support Production requirements. Employee may be required to work additional hours at short notice.

Essential Criteria
Degree in Engineering / Technical Discipline
Experience of working in a fast paced Manufacturing environment
Experience of working in a Paint Shop (not necessarily Automative)
Ability to analyse data and present potential solutions
Experience and ability in Practical Problem Solving

Desired Criteria
Knowledge and experience of supporting Health and Safety processes
Experience of, and ability to effectively use Lean / continuous improvement tools/ waste reduction techniques
Ability to lead Multi discipline/Cross Functional teams for Process Improvement
Evidence of Continuous Personal Development

Education Required
Candidates MUST be degree qualified.

Junior Electronics Design Engineer - Berkshire (BST-100011)

Apply now

Junior Electronics Design Engineer
Berkshire, England

A global providers of elevator safety detectors and communication systems are now looking for a Junior Electronics Design Engineer to work at their Head Office based in Maidenhead, Berkshire.

Responsibilities will include but not limited to:

Generating innovative product concepts and solutions.
Develop functional specifications for new products
Electrical design from concept through to production.
Schematic capture, simulation, PCB layout.
Preparing and release of component specifications, Bill of Materials and drawings.
Specification / development of production test equipment.
Liaise with suppliers, purchase, quality and Manufacturing
Managing / coordinating engineering changes and maintain detailed design records.
Participate in field evaluations ensuring best in class cost / quality versus competitors.

Key Skills and Attributes:

The successful applicant will be able to demonstrate a track record in embedded microprocessor based projects. Analogue / Digital electronic circuit design experience is essential and embedded software development skills are highly desirable.
Above all, you will be extremely innovative and have a can-do attitude.

Must be pro-active and results driven.
Must be able to work both independently and as part of a team.
Logical thought processes with excellent problem solving skills.
The Junior Electronics Design Engineer must hold a minimum 2:1 degree in electronics (or similar) with analogue and digital design experience.

Preferable Skills

Embedded software development in C.
Experienced in designing and passing appropriate EMC requirements
Experience in infra-red detection systems, RF Design and GSM telecoms.
Experience in the design of Audio products and Switched Mode Power Supplies.
Understanding of optical design
A good understanding of design for manufactures and test methodologies.

This is an exciting opportunity for a pro-active and highly motivated individual who is driven, ambitious and can make a make a positive impact.

Senior Measurement Engineer - Derby (JSK-100441)

Apply now

Senior Measurement Engineer
Derby, Derbyshire, England

The Company is a world leader in fluid technologies that improve the quality and performance of their customers` products in the global transportation, industrial and consumer markets.

Based at their European Technical centre, they are looking to appoint a Senior Measurement Engineer who will be responsible for managing measurement and calibration processes using computer driven measurement systems.

Main Accountabilities will include:

Act as a design authority for measurement systems and equipment to continuously improve, develop and implement technical solutions for the sites measurement systems.

Manage/Lead a team of Measurement Specialists

Manage and prioritise work flow to meet Testing Laboratory demands.

Maintain all measurements systems and calibration processes in accordance with ISO17025 ISO9001

Build and maintain relationships with internal customers to ensure their current and future measurement needs are met.

Ensure all measurement systems employed meet the customer requirements in terms of accuracy, reliability and cost effectiveness.

Represent the Company at both internal and external meetings where necessary.

Where necessary calculate measurement uncertainty budgets for the calibration processes employed

Responsible for compliance with legal and/or other protocols relevant to the role

REQUIRED SKILLS/KNOWLEDGE/EXPERTISE

Educated to degree level in Electrical/Electronic Engineering/Physics or another relevant discipline

Detailed knowledge of measurement and calibration with regard to engineering theory, design, installation, calibration and maintenance to computer driven measurement systems.

Experience of managing and calibration processes, including the calculation of measurement uncertainty budgets

Project Management experience

In depth knowledge of ISO 17025 and ISO9001 would be an advantage

Experience of developing successful working relationships with internal and external customers/suppliers

Knowledge of SAP would be advantageous

Knowledge on a variety measurement systems including, temperature, pressure, flow, torque, dimensional, force, viscosity, density and automotive gaseous and particulate emissions.

Competent user of computer database and spreadsheet packages.

Experience of work within UKAS environment is desirable

Key words and pharases include: UKAS, measurement, calibration, laboratory, test, automotive, ISO 17025, ISO 9001, ACEA, flow meter, CEC,

Test Technician - West Midlands (KYU-100599)

Apply now

Test Technician
West Midlands, England

Job Profile:
This position is responsible for providing support to the engineering team. It is a hands-on job that will include performance checking of samples, testing Electric Power Steering systems using mechanical and electrical test rigs and conducting follow-up evaluation work. The job demands sufficient computer literacy for logging / analysing test results, and the verification and reporting of results.
Principal Accountabilities:
To provide technical support in validating the product and it s subcomponents throughout all stages of its development.
Perform assigned tests on existing test equipment, including mechanical and electronic set-up of test samples, in line with the requirements of the Quality Manual, Customer Specifications and Test Equipment Work Instructions
Be familiar with and supportive of test documentation such as timing plans, progress records, run sheets and fault reports.
Be familiar and supportive of the Test Department quality procedures.
Be familiar with and maintain equipment stores, including rig spares, test fixtures and test equipment.
Support and familiarity with department sample handling systems, including sample identification and calibration control.
Key Skills/Personal Characteristics: -
Ideally time serviced apprentice with a background in testing high accuracy sub-assemblies.
Practical person with a flexible and willing approach
Understanding of basic electro-mechanical and test principles.
Good organisational skills
PC literate and proficiency with Microsoft Office.
Familiar with working within a quality system such as ISO 17025 or 16949.
A good communicator who is comfortable at all levels and with customers
A teamplayer who is willing to travel abroad occasionally, work shifts and overtime, sometimes at short notice
Experience of hydraulic equipment and control systems is desirable

NDT Engineer - onshore / weld - Poole - dependant on experience (100578)

Apply now

NDT Engineer - onshore / weld
Poole, Dorset, England
dependant on experience

I am seeking a contract NDT (non-destructive test) engineer to work on an initial 3 month assignment based onshore. teh work is primarily testing integrity of welds using non destructive techniques.

You must be currently certified to the following standard

ASNT PCN Level II in Dye Penetrant Inspection (DPI)

ASNT PCN Level II in Visual Inspection of Welds

ASNT PCN Level II in Ultrasonic Laminate Checks

No rate has been specified at this stage to encourage applications from candidates. Please advise availability, eligiblity to work in UK and desired rate range on your application. Shortlists will be created based on the experience/cost of an applicant

Battery Management Systems Engineers - Oxfordshire (PBA-100502)

Apply now

Battery Management Systems Engineers
Oxfordshire, England

This is an outstanding opportunity to join one of the world s most iconic brands.

Williams Advanced Engineering, located at Williams F1 Headquarters in Oxfordshire, will provide Jaguar with a direct technology transfer of their engineering expertise, particularly in the area of battery management systems for the new Jaguar C-X75 hybrid supercar.
They are now looking for Battery Management Systems Engineers to assist with the development of the car, from design through to manufacture.

The successful applicants will be degree qualified with experience of battery management systems for high performance sports cars or motorsport related programmes:

It is anticipated that the team will go on to complete future high profile advanced engineering projects, with Jaguar and other partners.

The Advanced Engineering Team will also interact with the core Williams F1 design team.

Vehicle Dynamics Engineers - Oxfordshire (PBA-100500)

Apply now

Vehicle Dynamics Engineers
Oxfordshire, England

This is an outstanding opportunity to join one of the world s most iconic brands.

Williams Advanced Engineering, located at Williams F1 Headquarters in Oxfordshire, will provide Jaguar with a direct technology transfer of their engineering expertise, particularly in the area of vehicle dynamics for the new Jaguar C-X75 hybrid supercar.
They are now looking for Vehicle Dynamics Engineers to assist with the development of the car, from design through to manufacture.

The successful applicants will be degree qualified with experience of complete vehicle dynamics for high performance sports cars or motorsport related programmes:

It is anticipated that the team will go on to complete future high profile advanced engineering projects, with Jaguar and other partners.

The Advanced Engineering Team will also interact with the core Williams F1 design team.

Composite Design Engineers - Oxfordshire (PBA-100494)

Apply now

Composite Design Engineers
Oxfordshire, England

This is an outstanding opportunity to join one of the world s most iconic brands.
Williams Advanced Engineering, located at Williams F1 Headquarters in Oxfordshire, will provide Jaguar with a direct technology transfer of their engineering expertise, particularly in the area of composite structures for the new Jaguar C-X75 hybrid supercar.
They are now looking for Composite Engineers to assist with the development of the car, from design through to manufacture.
The successful applicants will be degree qualified with experience of rapid product development, using preferably NX or Catia V5 for high performance sports cars or motorsport related programmes:

It is anticipated that the team will go on to complete future high profile advanced engineering projects, with Jaguar and other partners.

The Advanced Engineering Team will also interact with the core Williams F1 design team.

Senior Buyer - Bedfordshire (RB-100629)

Apply now

Senior Buyer
Bedfordshire, England

Our client is a world leading manufacturer of cabin interior products for commercial passenger aircraft and business jets, as well as, a wide range of cabin interior design, reconfiguration and certification services, including the conversion of passenger aircraft to freighter use.
To proactively manage all material suppliers in a timely manner to meet requirements and to ensure that all customer requirements (internal and external) are met.
Working within the SAO Aftermarket Purchasing team to procure parts to customer requirements within set timescales.
Liaising with other departments in the business to interpret/understand customer needs.
Enforce LTA and SLA contracts to ensure continuation of supply in the event of under-performing suppliers.
Participate in cross-disciplinary or cross site project teams to ensure that all supply requirements are considered for all projects.
Drafting and up-dating departmental/group procedures, adopting a flexible continuous approach.
Monitoring and reporting supplier performance to compliment operational objectives on cost, quality, delivery and inventory.
Provide guidance, support and assist with training for buyers as required.
Using the MRP system to understand demand and place purchase orders.
Maintain the information in the MRP system to ensure that (amongst others) supplier information, leadtimes, pricing and safety stock levels are correct.
The professional acquisition of parts in a timely manner at a price equal to or less than the account Standard cost

Transmission Design Engineers - Oxfordshire (PBA-100495)

Apply now

Transmission Design Engineers
Oxfordshire, England

This is an outstanding opportunity to join one of the world s most iconic brands.

Williams Advanced Engineering, located at Williams F1 Headquarters in Oxfordshire, will provide Jaguar with a direct technology transfer of their engineering expertise, particularly in the area of transmission design for the new Jaguar C-X75 hybrid supercar.
They are now looking for Transmission Design Engineers to assist with the development of the car, from design through to manufacture.

The successful applicants will be degree qualified with experience of rapid product development, using preferably NX or CATIA V5 for high performance sports cars or motorsport related programmes:

It is anticipated that the team will go on to complete future high profile advanced engineering projects, with Jaguar and other partners.

The Advanced Engineering Team will also interact with the core Williams F1 design team.

Senior Buyer - Bedfordshire (RB-100629)

Apply now

Senior Buyer
Bedfordshire, England

Aerodynamics Engineers - Oxfordshire (PBA-100493)

Apply now

Aerodynamics Engineers
Oxfordshire, England

An outstanding opportunity to join one of the world s most iconic brands. Williams Advanced Engineering, are now looking for Aerodynamics Engineers, to be located at Williams F1 Headquarters in Oxfordshire, to provide Aerodynamics / Computational Fluid Dynamics (CFD) support for the new Jaguar C-X75 hybrid supercar.
The Aerodynamic Engineers will assist with the development of the car, from design through to manufacture.
The successful applicants will be degree qualified with experience of rapid product development, using CFD Software, for high performance sports cars or motorsport related programmes:

It is anticipated that the team will go on to complete future high profile advanced engineering projects, with Jaguar and other partners.

The Advanced Engineering Team will also interact with the core Williams F1 design team.

Buyer - Bedfordshire (RB-100628)

Apply now

Buyer
Bedfordshire, England

Our client is a world leading manufacturer of cabin interior products for commercial passenger aircraft and business jets, as well as, a wide range of cabin interior design, reconfiguration and certification services, including the conversion of passenger aircraft to freighter use. They are currently looking to recruit a Buyer to support the Aftermarket team.
Proactively manage all material suppliers in a timely manner to meet requirements.
To ensure that all customers requirements (internal and external) are met.
Working within the Aftermarket Purchasing team to procure parts to customer requirements within set timescales.
Liaising with other departments in the business to interpret/understand customer needs.
Using the MRP system to understand demand and place purchase orders.
Maintain the information in the MRP system to ensure that (amongst others) supplier information, leadtimes, pricing and safety stock levels are correct.
The professional acquisition of parts in a timely manner at a price equal to or less than the accounting Standard cost.
Inventory management through scheduling and communication with suppliers including the use of the BE Aerospace Buyer Supplier portal.
Responsibility for the security of the supply chain and the uninterrupted supply of all materials.
Attending progress/production meetings.
Utilise where possible approved Low Cost Country suppliers to contribute to an overall purchasing spend of x per cent (where x = the current key objective figure) of total spend in LCC.

Process & Business Development Engineer - Gaydon - £25.60 - 25.60 per hour (TFI-100632)

Apply now

Process & Business Development Engineer
Gaydon, Warwickshire, England
£25.60 - 25.60 per hour

A Process & Business Development Engineer is required to work on contract for our large automotive client based in Gaydon, Warwickshire.

Description
Position Description:
Project Engineer, Process & Business Development

Job Requirements
Skills Required:
•Ability to manage and lead process development and business change
•Facilitation skills - ability to lead and direct cross-functional workgroups (including interaction with senior management)
•Strong analytical and problem solving skills
•Presentation skills - ability to present to senior management and deliver rollout/training material

Skills Preferred:
Process/value stream mapping

Details
Experience Required:
Experience of successfully leading/managing business change in the commercial environment of a medium to large enterprise.

Experience Preferred:
Experience of purchasing in an automotive or similar environment.

Education Required:
HND or equivalent in business/process management or similar.

Education Preferred:
Degree or equivalent in business/process management or similar.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

NVH Engineer - Gaydon - £29.90 - 29.90 per hour (JWI-100486)

Apply now

NVH Engineer
Gaydon, Warwickshire, England
£29.90 - 29.90 per hour

A NVH Engineer is required to work on contract for our large automotive client based in Gaydon, Warwickshire.

Description
Position Description:
NVH Engineer

Job Requirements
Skills Required:
The successful candidate will have an in depth knowledge of NVH principles and techniques and a proven track record in NVH problem solving at a vehicle level. Experience in target setting, component specification and vehicle build support are additional requirements. The candidate must be capable of working under own initiative but be prepared to document findings, make recommendations and report out results at a senior level.

Skills Preferred:
Experience in using LMS test lab as the core NVH software.

Details
Experience Required:
Extensive minimum NVH background ideally in a vehicle environment.

Experience Preferred:
Issue resolution experience of Powertrain / Body / Chassis NVH problems.

Education Required:
Degree Level in an Engineering related discipline

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Catia V5 CAD Engineer - Coventry - £26.10 - 26.10 per hour (KDN-100630)

Apply now

Catia V5 CAD Engineer
Coventry, West Midlands, England
£26.10 - 26.10 per hour

A Catia V5 CAD Engineer is required to work on contract for our large automotive client based in the West Midlands.

Description
Position Description:
Catia V5 CAD Engineer for Cabin Systems

Creation of CAD geometry in support of AIM resolution for virtual series culminating in M1DJ and FDJ. Provide CAD support, leading and progressing the design in line with the programme timescales and deliverable cadence. Ensure data is up to date and reflects the required levels of maturity at any given point in time. Liaise with other areas within Body Engineering, other affected functional areas, the supply base and programme teams, to ensure system compatibility issues are resolved in a timely manner.

Job Requirements
Skills Required:
Catia V5 is a minimum requirement. Engineering knowledge of cabin systems design, function, performance, production & manufacturing requirements.

Skills Preferred:
AVA knowledge or potential for AVA Tce. Proven project time line management. Any person supplied should have a valid UK driving licence and meet the medical requirements of OEM facilities. Working knowledge of project delivery processes- GPDS / FPDS / PPAP. Working knowledge of change management processes- AIMS, WERS, PACN.

Details
Experience Required:
Successful history as a CAD Designer/Engineer in the automotive sector.

Education Required:
Ideally degree educated

Additional Information:
Position will migrate to Gaydon July 2011

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Vehicle Safety Delivery Engineer - Coventry - £23.80 - 23.80 per hour (JWI-100624)

Apply now

Vehicle Safety Delivery Engineer
Coventry, West Midlands, England
£23.80 - 23.80 per hour

A Vehicle Safety Delivery Engineer is required to work on contract for our large automotive client based in the West Midlands.

Description
Position Description:
Vehicle Safety Delivery Engineer

The position is to deliver the agreed vehicle safety targets for a major new product. The role requires the applicant to integrate the activities of design, package, occupant restraints, restraints electronics, BIW and other component groups to deliver safety performance. The role also includes planning and analysis of tests.

Job Requirements
Skills Required:
Engineering development skills. Mechanical and data analysis skills.

Skills Preferred:
Familiar with crash CAE, test protocols, test laboratories.

Details
Experience Required:
Applicants should be familiar with vehicle safety integration and testing activity. The applicant should be familiar with aspects of vehicle architecture, legal and consumer safety standards.

Experience Preferred:
The applicant should be able to critique system and component design and CAE model output, but is not expected to build or run CAE models.

Education Required:
HND

Education Preferred:
Degree: Engineering, Mechanical Engineering, Engineering Maths, Systems Engineering, Physics

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Wednesday 11 May 2011

Principal Chassis Analysis Engineer - United Kingdom (KYU-100568)

Apply now

Principal Chassis Analysis Engineer
United Kingdom

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
Responsibilities:
CAE - ADAMS/Chassis/Car simulation and analysis of suspension systems and vehicle dynamic performance
CWE - FE based structural durability of chassis systems
Creation of road spring, damper and bush specifications
Experience
Degree qualified or similar
Strong numeracy/literacy
Minimum of 5 years automotive experience essential
Capable of leading a project with minimum supervision
Demonstrate a depth knowledge in chassis structural FE and dynamic analysis (ADAMS)
Demonstrate depth of knowledge in vehicle chassis system and dynamics
Extensive general knowledge in vehicle chassis systems
Knowledge of Mat lab an advantage

Will potentially spend 25% of working time overseas in India or alternative locations

Accounts Assistant-Part Qualified - Cleveland Tontine - £23,565-£26,000 plus excellent bonus & benefits package (GSI-100541)

Apply now

Accounts Assistant-Part Qualified
Cleveland Tontine, North Yorkshire, England
£23,565-£26,000 plus excellent bonus & benefits package

An excellent opportunity to join a world renowned organisation that design and manufacture earth moving and agricultural vehicles.

The firm are seeking a Part Qualified (AAT or CIMA) Accounts Assistant with experience, ideally in a manufacturing environment. You`ll be performing associated accounting tasks from VAT intrastats, accounts payable/receivable, petty cash, bank reconciliations, balance sheet reconciliations and general ledger.

The role will largely be unsupervised so you must feel comfortable performing these tasks under your own guidance, often to strict timescales.
This is a permanent role paying an attractive salary with a good benefits package; the salary offered is up to 26,000 per annum and we are estimating a start date of 6.6.11.

CNC Programmer-Miller - Cambridgeshire (GSI-100565)

Apply now

CNC Programmer-Miller
Cambridgeshire, England

The company are a local firm with a good reputation; their main area of work are high precision parts for the Automotive industry. Typically the parts are of very low volume and of very challenging complexity.

They take pride in the tight tolerances they work to and have a high standard which aims to produce zero scrap.

The CNC Programmer role is required to work in the expanding manufacturing operation. They are looking for a person to undertake a variety of Milling duties so you must have a proven track record of these two skills.

You`ll be setting up new jobs, loading and modifying existing programmes (micron tolerance) and working from complex engineering drawings.
It`s a fast paced environment so you must feel confident in your own ability to complete the task; they is the usual documentation of work carried out also.
If you have customer facing experience, that would be perfect and CAD/CAM skills are a pre requisite.

This is a permanent role based on an hourly rate; the rate is dependent on experience and to be discussed at submission stage.

Business Development Manager - Nottingham (JSK-100395)

Apply now

Business Development Manager
Nottingham, Highland, Scotland

An award winning company, specialising in the development of innovative solutions for transmissions and driveline systems. In addition to their market leading software systems, our client is focused on providing engineering services for the design, development and refinement of transmissions and drivelines for automotive, off-highway vehicles, wind turbines and industrial drive applications.

They are looking for a Business Development Manager for simulation softward. The role is to assist the Global sales and business development for Automotive/ Transport teams and assist in the development of new business in Defence and Aerospace sectors across Europe.

The role will include:

Assisting in the sales and business development for the worldwide regional office (Nottingham) in line with projected targets.

Development of Blue-Chip accounts in the new business areas (Defence and Aerospace sectors across Europe e.g. BAE Systems, etc and development and growth of new markets e.g. Russia, Brazil.

Be active in Market Research for all sectors and countries, seeking funding opportunities where available.

Writing proposals with support from technical specialists.

Visit customers to discuss possible projects and software developments and deliver customer sales presentations.

Liaise with customers to report project progress/issues etc.

Arrange regular updates to customers through road shows/workshops/seminars within market segments

Support regional sales request making proposals, commercial presentations, documentations

Educate the regional team for the new product and the new business

Support divisional director for the commercial administration

Qualifications and Specific Technical Skills

2:1 Degree in Mechanical/Automotive Engineering, perhaps post-graduate qualified. Preferably chartered status. And possessing second language skills would be ideal.

Essential experience:

5+ Years Experience in Business Development in a similar sector/geographies.

Strong customer facing skills developed from a minimum of 5 years account management.

Proven track record of growing key accounts and new business through pro-active customer management.

Excellent communication and negotiation skills.

Established and proven track record in commercial, sales and marketing.

Consultancy Skills

Project Management experience

Presentation experience.

Experience of dealing with large multi discipline corporations.

Sensitive to cultural diversities and ability to communicate and deal with all nationalities.

Programme Attribute Team Leader - Gaydon - £25.70 - 25.70 per hour (JWI-100574)

Apply now

Programme Attribute Team Leader
Gaydon, Warwickshire, England
£25.70 - 25.70 per hour

A Programme Attribute Team Leader is required to work on contract for our large automotive client based in Gaydon, Warwickshire.

Description
Position Description:
Programme Attribute Team Leader, HMI (Human Machine Interface) and A&U (Accommodation & Usability).

Job Requirements
For specific new vehicle programmes, take project management responsibility for development of the Human Machine Interface, Accommodation and Usability: i.e. develop & set targets, develop the vehicle concept with Design & Engineering, ensure adherence to relevant standards, lead problem resolution and validate delivery throughout the vehicle design & development process. Report status using formal documentation (e.g. eFDVS) and act as the attribute single point of contact for the programme team.

Skills Required:
Sound understanding of good HMI & ergonomic design principles for vehicle systems user-controls. Statistical analysis, problem solving & root-cause analysis. Clear and concise communicator. Ability to produce formal documentation to a professional standard. Proven ability to manage multiple projects and deliver to short timescales & deadlines. Self-motivated and able to work unsupervised within the local team and interfacing across business functions.

Details
Skills Preferred:
Interpretation of customer quality data (e.g. JD Power). Design of experiments (HMI & Ergonomics).

Experience Required:
Design & validation of electronic systems functionality (in particular, user-interfaces) e.g. HMI/functionality specifications creation, set-up & conduct user-trials. Vehicle design for driver & passenger accommodation and usability.

Experience Preferred:
Familiarity with Premium automotive sector, products and features. Competitor research/benchmarking (physical & web-based).

Education Required:
Educated to degree level in a related discipline (Human Factors, Ergonomics and/or Engineering).

Education Preferred:
Higher qualification (e.g. MSc in Human Factors).

Additional Information:
This role is based at Gaydon, but will also require frequent working at Whitley.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Design Engineer - Leicester - £25/hr Limited Co. rate (RST-100573)

Apply now

Design Engineer
Leicester, Leicestershire, England
£25/hr Limited Co. rate

We are seeking to appoint a Design Engineer on a 12-month contract basis in Leicester.

The Design Engineer will have a varied and exciting role creating new designs from concept through to detailed design ensuring the parts are validated and meet the functional requirements.

The candidate will be responsible for the production release of the parts and expected to work with suppliers to ensure the parts can be manufactured and meet the cost and quality targets.

The successful candidate will need to be flexible and be able to work on multiple areas of the machine i.e. structural fabrications, non-metallic components and cab interior.

Essential qualifications required for the role:
* Engineering / Science Degree or equivalent industry experience
* Machine engineering design experience.
* Computer literate with Pro-E CAD engineering skills
* Experience in designing structural fabrications and non-metallic components.
* Knowledge of Engineering process s, drawing standards, specifications, and Teamcentre workflow is desirable.
* Knowledge and experience of problem solving analysis.
* Experience of Off highway equipment or other heavy machinery
* Ability to self direct but also work effectively in a diverse team environment.Ability to self direct but also work effectively in a diverse team environment.

Sales Manager - Defence Systems - Buckinghamshire (KAL-100532)

Apply now

Sales Manager - Defence Systems
Buckinghamshire, England

Sales Manager - C3 Systems required to deliver the strategy, direction and sales growth targets for maritime systems.

The role is based in Bucks and is commutable from Aylesbury, Uxbridge, Maidenhead, Henley, Watford, Oxford and West London.

Champion sales and tendering process from lead through to deal closure. Articulate the benefits and value of the company offering and differentiate the company approach. Forge and develop client relationships. Think strategically about the client needs and help unlock deeper issues faced by the client to extend the value offering and broaden company solutions. Network extensively and effectively with colleagues to understand the scope of our technologies and solutions. Assemble manage and motivate bid teams. Close deals.

An excellent first degree, preferably in an engineering or physics discipline. A relevant postgraduate qualification would be advantageous. A credible industry figure with a proven record of successful business development in a defence environment, over three years in a technical, commercial or consultancy business environment. Ideally experience of developing scalable business and forging innovative commercial relationships with partners. Likely to have experience of sales to government bodies and defence primes. Combat System and International sales experience an advantage. A self starter with a high degree of energy and ambition. Excellent communication and presentation skills, the ability to listen and communicate confidently yet sensitively. Outstanding organisational, collaborative, inspirational, influencing and motivational skills. Quick witted with the intellect flexibility determination and sense of humour. Flexible with the ability to adapt to the changing needs. Able to understand technical products and solutions and convey their benefits. Creative and inventive, able to originate complex commercial solutions. Patient and tenacious with a strong negotiating style.

Purchasing Opportunities - Warwickshire (LO-95554)

Apply now

Purchasing Opportunities
Gaydon, Whitley, Birmingham, Coventry, Oxford, Stafford, Northampton, Wolverhampton, Rugby, Bromsgrove, Leamington Spa, Leicester, Worcester, Milton Keynes, Stratford Upon Avon

Purchasing opportunities both permanent and contract exist within one of the most successful and fastest growing organisations in the UK. Jaguar Land Rover is a business built around two great British car brands that design, engineer and manufacture in the UK. With a world-renowned reputation for the development and marketing of a world-class range of the most desirable and exhilarating vehicles money can buy, Jaguar Land Rover sells its products in over 150 markets worldwide and they are going from strength to strength. As part of its expanding and dynamic Purchasing function, exciting opportunities exist for a number of talented Buyers and Senior Buyers.
As a strategic Buyer and key member the Purchasing function, you will be responsible for sourcing, relationship and strategy development, commercial objectives and quality across a portfolio of commodities. You will be accountable for managing the supplier relationship and achieving spend and cost saving targets on time and in budget

You must be:
* Degree qualified - ESSENTIAL
* Have at least 2 years purchasing experience - essential
* Demonstrate good negotiation skills - essential
* Experience of sourcing - end to end - essential
* Excellent communication skills, written and verbal
* Aptitude to working in a changing and challenging environment
* Able to manage and execute projects on time and in budget
We are looking for talented strategic Buyers with a variety of backgrounds, FMCG, retail, IT, media or automotive. You must be able to demonstrate an excellent track record of successful negotiations and a clear understanding of the latest sourcing techniques.

These are exciting roles within an organisation that is truly a global business with a rich heritage and exciting growth plans for the future. In return, you will be offered attractive salary/benefits package, excellent prospects for development and progression.

Operations Quality Manager - Cambridge (BST-100546)

Apply now

Operations Quality Manager
Cambridge, Cambridgeshire, England

Our client has an established global reputation for the continual development and manufacture of its total coding and printing technologies that meet the needs of manufacturers and sets new industry standards in quality and reliability.

They are now looking to recruit an Operations Quality Manager to manage a small team to ensure suppliers deliver product fit for purpose and to ensure product reliability issues are captured and resolved expediently.

The successful candidate will be driven by the desire to provide manufacturing with error free parts and provide customers with products of high reliability.

Main responsibilities include but are not limited to:

Establishing suitable measurement and improvement systems for incoming quality from current supply base.
Liaise with Manufacturing Engineering and Manufacturing to understand and resolve current quality and rework issues
Corrective Action system management with suppliers - carry out root cause analysis and ensure robust solutions are implemented by suppliers for problems in supplied quality affecting manufacturing.

Support Manufacturing in the identification of immediate Quality issues and provide satisfactory customer protection.
Develop and implement system for ensuring adequate incoming quality checks according to risk.
Develop suitable supplier control plans and support supplier visits where necessary.
Establishment of working methods and systems for the systematic review of Quality data available from internal and global manufacturing sites as well as field customer responses.

The objective of the above is to improve supplier quality and reliability, leverage supplier capabilities and therefore drive down the cost of manufacturing and test.
Reporting to the Group Manufacturing Engineering Director, this is a Management position that involves interaction with personnel at all levels.

Educated to Degree level with solid relevant experience in a supplier development, quality or manufacturing environment.

You will be able to demonstrate experience in developing suppliers and show your understanding and use of appropriate tools including six sigma, Lean Manufacturing methods, metrology and process capability studies.

A good communicator with the gravitas and confidence to be able to influence at senior levels and persuade at all levels, exercising a high degree of tact and diplomacy as required.
A firm character and the ability to work as part of a team or alone as the situation demands are essential qualities.

Manufacturing Engineer - Cambridge (BST-100560)

Apply now

Manufacturing Engineer
Cambridge, Cambridgeshire, England

Our client has an established global reputation for the continual development and manufacture of its total coding and printing technologies that meet the needs of manufacturers and sets new industry standards in quality and reliability.

They are now looking for a Manufacturing Engineer with a mechanical bias is required to support production of Large Character Printers, Outer Case Coding Printers, Thermal Transfer printers and Spares Manufacturing.

You will work as part of a Manufacturing Engineering team to ensure products are built to the appropriate standards and to bring about continuous improvement in all areas of Operations. You will ensure that the highest level of quality and process effectiveness is built into the manufacturing process.
Main responsibilities will include:
Managing engineering change where required for product improvement, cost reduction or obsolescence avoidance.
Assisting manufacturing in fault finding of product and test fixtures when problems arise threatening the production schedule.
Carrying out process audits to ensure adherence to process.
Creating new process instruction sheets and ensuring existing instructions refer to the latest product specifications and that the information is presented in the most appropriate style using the most effective media.
Identifying improved working methods and test systems to improve product quality.
To provide mechanical / electronics support for the Large Character Printer, Outer Case Coding and Thermal Transfer Printer manufacturing facility. Specifically in fault finding, test fixture specification, purchase and maintenance.
Liaison with Supplier Quality Development to resolve material non-conformity, ensure robust processes and effective process control. Also to work with suppliers to ensure all value engineering opportunities are realised.
As the Manufacturing Engineer you will have an honours degree or equivalent (i.e. recognised status by a professional institute), preferably in Mechanical or Manufacturing Engineering, with proven experience in a manufacturing environment. You will be flexible, a level thinker and capable of solving wide-ranging technical problems.
You will have a firm character and be able to work as a team member or alone as the situation demands. You will be able to communicate with people at all levels in the organisation.
You will also be able to complete tasks on time using appropriate planning tools with the minimum of supervision. Experience of New Product Introduction and Six Sigma also an advantage. You will be expected to keep up to date with relevant technology.

Operations Engineer (Marking Materials) - Cambridge - Up to £42K (BST-100562)

Apply now

Operations Engineer (Marking Materials)
Cambridge, Cambridgeshire, England
Up to £42K

Assistant Buyer - Warwickshire (DRP-99205)

Apply now

Assistant Buyer
Warwickshire, England

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands.To assist Technical Buyers in identifying and sourcing parts to existing or new suppliers to support significant reduction in number of parts not sourced. Primary Focus will be parts that have backorders outstanding and focus on parts that have no supplier sourced to determine if parts should be turned down (refuse to accept further dealer orders) or identify appropriate source in the event of a dealer order being made.
JOB DUTIES: Working within the purchasing IM Vendor team, supporting the Technical Buyers to identify suppliers (ideally within existing supplier base) and reach agreement on commercial terms ie: price, minimum order quantities, order multiples and lead times. Required to work directly with supplier, pre-procurement, parts engineering, pricing, engineering and the planning teams at CAT.. Updating status reports for management review. Knowledge of SAP to raise info recs for Buyer.
Experience Required:
Background/Experience and Skills: This position requires a commercial background preferably within Purchasing, but able to evaluate business case proposals. An understanding of processes and systems (SAP, MicroCAT) would be beneficial. SAP experience preferred. Must be able to work effectively as part of a team or under own initiative in a pressurized environment.. Must be an effective communicator and work with all levels of personnel, inside and outside of the company including frequent contact with external supplier representatives/management

Catia V5 CAD Engineer - Coventry - £26.10 - 26.10 per hour (KDN-100563)

Apply now

Catia V5 CAD Engineer
Coventry, West Midlands, England
£26.10 - 26.10 per hour

A Catia V5 CAD Engineer is required to work on contract for our large automotive client based in the West Midlands.

Description
Position Description:
Catia V5 CAD Engineer Cockpit Systems - Creation of CAD geometry in support of AIM resolution for Virtual Series culminating in M1DJ and FDJ. Provide CAD support, leading and progressing the design in line with the programme timescales and deliverable cadence. Ensure data is up to date and reflects the required levels of maturity at any given point in time. Liaise with other areas within Body Engineering, other affected functional areas, the supply base and programme teams, to ensure system compatibility issues are resolved in a timely manner.

Job Requirements
Skills Required:
Catia V5 is a minimum requirement. Engineering knowledge of Cockpit/Climate Systems design, function, performance, production & manufacturing requirements.

Skills Preferred:
AVA knowledge or potential for AVA OEM Tce. Proven project time line management. Any person supplied should have a valid UK driving licence and meet the medical requirements of OEM facilities. Working knowledge of project delivery processes- GPDS / FPDS / PPAP. Working knowledge of change management processes- AIMS, WERS, PACN.

Details
Experience Required:
Successful history as a CAD Designer/Engineer in the automotive sector.

Education Required:
Ideally degree educated

Additional Information:
Position will migrate to Gaydon July 2011

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Tuesday 10 May 2011

Project Manager - Norfolk - £30k - 32k per year + Bonus + Pension (SMA-100531)

Apply now

Project Manager
Norfolk, England
£30k - 32k per year + Bonus + Pension

Our client is the leading designer and manufacturer of electric heaters and control systems for safe, flameproof and hazardous area applications. The Range includes immersion heaters, process heaters, air warmers, explosion proof heaters, fuel gas heaters, fuel oil heaters, line heaters etc.

You will be responsible for the overall management of assigned manufacturing contracts of engineered products, attending on/off site client meetings as required by contract, checking and verification of design documentation including the review and implementation of client specifications, ensuring that all designs meet the requirements of the company`s Certification, local and international standards and regulations. You will also be responsible for ensuring that output targets, as agreed in production meetings and on-time contract completion dates are adhered to. You will liaise with clients, sub-vendors, Engineers, Project Buyers and Shop Floor Supervisors as appropriate to discuss and resolve technical, production and commercial issues relating to agreed output and ensure that all shipping requirements are fulfilled in advance of equipment completion/ despatch.

In addition, you will assume complete commercial responsibility for assigned contracts including, but not limited to ensuring LOC s are in place as required by contract, ensuring that any potential liquidated damages claim is dealt with prior to equipment shipment and revised contract dates agreed in the event of contract slippage, signing of Project Buyer generated purchase orders to ensure project spend is within the contract costing, liaising with the Proposals Engineer in instances where proposed material spend is in excess of that allowed in costing and reviewing monthly cost of sales, analysing any areas of overspend. You will also work within a Quality Management System meeting the requirements of BS EN ISO 9001

Product Support Engineer - West Midlands (RB-100491)

Apply now

Product Support Engineer
West Midlands, England

Our client is a leading manufacturer of rolling bearings and linear products as well as a renowned supplier to the automotive industry of high-precision products and systems for engines, transmissions and chassis applications. The group of companies stands for exceptional customer focus, innovative ability and the highest possible level of quality. Sales of over 9.5 billion were generated at over 180 locations in more than 50 countries in 2010. With more than 67,500 employees worldwide, the Group is one of the largest German and European industrial companies in family ownership. They are currently seeking a Product Suport Engineer based in the West Midlands.
Provide technical support on bearings and maintenance products/services to develop new business opportunities in Wind Energy. Provide technical support to MRO, Distribution and OEM customers.
Provide specialist engineering advice on bearings and FIS products to the Wind Energy Sector and develop new business opportunities.
Provide specialist engineering advice on bearings and FIS products to meet MRO customer requirements and strengthen market position.
Provide effective and timely technical/engineering support to internal and external customers to develop profitable business growth.
Develop and maintain a thorough knowledge of both the Groups product range and competitors products to offer the most cost effective solution to the customer.
Coordinate activities with Application Engineering/Technical Departments within the Group to ensure that the customer gets Added Value solutions.
Investigate and report on bearing failures/application problems in service to provide timely and effective advice and solutions
Develop close links with the engineering/maintenance departments of key MRO customers to identify and promote new opportunities for products and services.
Responsibility for working within the guidelines as outlined in the Company s Quality and Environmental Manuals

Quality Enginer - Shrewsbury (GWOC-100014)

Apply now

Quality Enginer
Shrewsbury, Shropshire, England

Our client is the main stamping site for this multi-site manufacturer of automotive body panels for many of the world`s leading vehicle producers.

A new 3/4-month contract opportunity has arisen for a Quality Engineer based in Shrewsbury.

As Quality Engineer you will introduce and improve processes and procedures to ensure high quality products reach the customer. This is a critical appointment, which will rely heavily not only on the skills gained through experience in a quality role but the interpersonal skills of the individual.

Main Duties and Responsibilities:
* Support new product engineering throughout the APQP process.
* Support manufacturing, co-ordinate internal product / process improvement, problem solving and internal PPM improvements.
* Interface with the customer to co-ordinate concerns and problem resolution.
* Out of hours contact for designated customer base.
* Support Purchasing when required to improve supplier performance.
* Maintain and improve core quality documentation.
* Maintain and improve quality and environmental system and procedures in line with ISO TS16949, ISO14001 and business requirements.
* Carry out internal audits of the quality and environmental management system and follow up all corrective actions ensuring effective and timely response.
* Formulate and conduct quality training and awareness events.
* Undertake quality-related projects

Characteristics and Requirements:
* Qualified to HNC level, an equivalent NVQ or associate membership to the Institute of Quality Assurance.
* Experience in the development, implementation and auditing of quality systems and procedures
* Previous experience in high volume manufacture, preferably automotive body in white.
* Knowledge of ISO9002,TS16949:2002, ISO14001, SPC, FMEA, PPAP, control plans.
* Knowledge of metallurgy would be an advantage
* A persuasive and influential approach in order to promote change, run in-house training programmes and drive quality systems and initiatives.
* A current driving licence.
* Experience of skin panel and aluminium pressings and assemblies required.

Process Control Engineer - Peterborough - £35K-£42K + Benefits (GWOC-100055)

Apply now

Process Control Engineer
Peterborough, Cambridgeshire, England
£35K-£42K + Benefits

We are recruiting for a permanent Process Control Engineer based in Peterborough.

As Process Control Engineer, this role will encompass an interesting spectrum relating to new business initiatives and managing ongoing Supplier Performance improvements.

* APQP (Advanced Product Quality Planning) Management for all NPI programmes (specific to 6 Engine Manufacturing Facilities Globally).
* PCN (Process Change Notification) process management ensuring supplier process change requests are controlled and robustly implemented.
* Ensuring all relevant requirements and related changes are thoroughly documented e.g. Process FMEA {failure mode and effects analysis}, Process Control Plans, Gage RandR {repeatability and reproducibility}).
* Validate Supplier stated Process Capabilities.
* PPAP (production part approval process) completion and approval prior to delivery of new parts

QUALIFICATIONS, SKILLS and EXPERIENCE REQUIRED:
This is an excellent entry point for Engineering or Manufacturing professional with a real desire to focus on continuous improvement. The role will provide substantial exposure across the business globally and a good platform for career progression into leadership roles across a variety of disciplines.

Essential:
* A minimum of three years of job-related experience
* A bachelor's degree (or equivalent experience) preferably in engineering
* Engineering or manufacturing background plus familiarity with manufacturing processes used to produce components and assemblies for Caterpillar Products
* Knowledge of shop operations

Desirable:
* Quality engineering certification
* Experience with 8D
* APQP experience
* History of managing supplier relationships demonstrated by purchasing or supply chain experience
* 6 Sigma experience as a Green Belt or Black Belt
* Working knowledge of metrology

Manufacturing Manager / Director - Bristol - £45 - £65k + benefits (GW-100535)

Apply now

Manufacturing Manager / Director
Bristol, England
£45 - £65k + benefits

Manufacture equipment predominantly for process industry particularly pertochem, water ,steel industries. Manufacturing includes machining, metal manipulation and assembly. There is also a full design facility on site as well as the sales and marketing function. The brand is well known and there are now plans to expand the business considerably.

Take full responsibility for all of manufacturing encompassing production, quality, supply chain and the development of a lean and continuous improvement culture. Candidates should be degree qualified and ideally for an assembly background. The opportunity is to influence the business strategy and to develop with the business for a more senior position. Initially the position reports to the Managing Director.

Manage all the manufacturing functions and to drive through lean and the growth plan. This is seen as the first step to prepare for a more senior role within the business.

Manufacturing / Project Manager - West Midlands - £40-45k + benefits (GW-100524)

Apply now

Manufacturing / Project Manager
West Midlands, England
£40-45k + benefits

A global supplier of finished rubber based finished assemblies to the Aerospace OEM`S and aftermarket. The business has enjoyed sustained growth over the past few years as air travel has developed globally. To maintain the volume increase there is substantial investment in people, plant and technology as well as the development of lean.

To manage a team of 30-40 operators via team leaders whilst managing crucial project for the business which could be the introduction of ERP or capital plant. The role is seen as crucial to take the business forward and will deputise for the plant manager and manage in his absence.

Candidates should have experience of managing in the rubber industry and be very conversant with lean and developing a change culture.
Manage a team of operators and manage the plant in the absence of the plant manager.

Excellent opportunity for career development with this expanding business. Involvement at the highest level in managing the business with input into the strategy for manufacturing. Position seen as the first step to a full position of manufacturing manager for the site of over 150 people.

Engineer Data Management - West Midlands - £21.30/hr Ltd rate (RST-99304)

Apply now

Engineer Data Management
West Midlands, England
£21.30/hr Ltd rate

We are recruiting for an Data Management Engineer intially on a 12-month contract basis within the West Midlands.

You will be responsible for providing part number level reports / files to various departments detailing requirements to support specific vehicle builds. Liaising with vehicle launch teams you will use established IT systems to create and maintain the information whilst working accurately and meeting deadlines as appropriate.

Skills Required:
An experienced and proficient user of MS Excel and Access, able to write macros and develop using VB. Familiar with mainframe systems and techniques to generate and integrate data from various sources. Excellent communication skills, able to work to strict deadlines whilst delivering high quality information and reports. Able to interpret business requirements for information and develop appropriate solutions to deliver.

Skills Preferred:
Use of bespoke mainframe reporting systems

Experience Required:
Extensive use of MS Excel, Access and database development

Experience Preferred:
Appreciation of bill of material data structures (ideally automotive / similar)

Education Required:
Likely to be A level or equivalent

Education Preferred:
Relevant Logistics / IT qualification

Process Engineer - 20130 - £17.89/hr Ltd Co rate - Solihull - £17.89/hr Ltd Co. rate (RST-100073)

Apply now

Process Engineer - 20130 - £17.89/hr Ltd Co rate
Solihull, West Midlands, England
£17.89/hr Ltd Co. rate

We are recruiting for a Process Engineer to be based in the West Midlands on a 12-month contract basis.

As Process Engineer, you will be responsible for business processes and IT systems co-ordination.

Ideally applicants are required to be:
* IT Literate
* Have a logical approach to problem solving
* Knowledge of BOM (Bill of Materials) creation
* Experience of general manufacturing processes.

In addition, applicants need to be HND/ HNC or degree qualified in either a manufacturing or engineering discipline.

Monday 9 May 2011

Product Support Engineer/Design Engineer - Leighton Buzzard (JPR-100375)

Apply now

Product Support Engineer/Design Engineer
Leighton Buzzard, Bedfordshire, England