NVH Principal Engineer - Coventry (RGR-100918)

Apply now

NVH Principal Engineer
Coventry, West Midlands, England

Our client is a Centre of Excellence in the development of Electric Vehicles (EV) and Hybrid Powertrains, it also offers consultancy services in whole vehicle development. Based in Coventry on a very pleasant university campus, it now has an opportunity for a talented Principal Engineer to lead Vehicle and Powertrain NVH test and analysis projects.

This role is based in Coventry and will also require travel to India, frequency to be discussed at interview.

Responsibilities;

• Act as an NVH advisor and consultant on several concurrent automotive engineering projects
• Support and/or conduct data acquisition and drive appraisal activities
• Provide NVH support to the design engineering teams in the UK and India
• Develop design guidelines, processes and procedures
• Provide NVH status to Project Reviews
• Develop refinement improvement strategies (Vehicle and/or Driveline)
  Candidate profile;
• Mechanical/acoustics engineering degree (BEng/MEng/BSc/MSc/Phd)
• Minimum of 5 years experience of Vehicle/Powertrain NVH test and analysis for an automotive OEM or consulting house
• Experienced in use of NVH test instrumentation and methodologies (Powertrain /mounting systems/driveline refinement/TPA/sound quality engineering, signal processing, data analysis and presentation)
• Experienced in using one or more of the following software acquisition and
  analysis tools:- MATLAB / LMS CADA-X / LMS Test.Lab / HEAD Artemis
• Project engineering skills (timing plans, work instructions, costing, reporting, data presentation, health and safety)

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Process Engineer - Automotive Welding - Shrewsbury (GSI-103260)

Apply now

Process Engineer - Automotive Welding
Shrewsbury, Shropshire, England

Our client is the main stamping site for this multi-site manufacturer of automotive body panels for many of the world`s leading vehicle producers.

An experienced Process Engineer - BIW Resistance Welding is required to join a busy team. You will have experience of resistance welding / spot welding from within an automotive environment.

You`ll be working in a large team for the clients primary customer; usage of either ABB, Motorman or Fanuc equipment is a pre requisite.

This is a permanent role based on days (Mon-Thurs 0830-1630 and Fri 0830-1300) with a good market salary.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electrical Certification Engineer - contract - Bedfordshire (PKT-103255)

Apply now

Electrical Certification Engineer - contract
Bedfordshire, England

Our client is a world leading manufacturer of cabin interior products for commercial passenger aircraft and business jets, as well as, a wide range of cabin interior design, reconfiguration and certification services, including the conversion of passenger aircraft to freighter use.
This role is based in the Bedfordshire area, close to the M1 and is commutable from Dunstable, Milton Keynes, Bedford and Luton.

As Electrical Certification Engineer your main purpose will be to assist in delivering major programmes and supporting ongoing production for the Structures business ensuring they meet regulatory requirements.

The appointed Certification Engineer will ensure that company design is certified to EASA or FAA regulations and satisfies the contract specification.

Generation and checking of;
- Wiring diagrams.
- Electrical Load Analysis
- Electrical panel assembly and detail metalwork.
- Grounding and Bonding Analysis
- FMEA

Other duties will include:
- Participate in Design Reviews throughout each phase of the New Product Introduction process
- Support the selection and application of components appropriate for design
- Preparation of schemes and provision of technical support for test programmes. To analyse test results and report findings.
- To provide `support to production` services including investigation to queries raised through Design Query Notes and Non-Conformity Reports, production permits and concessions and any other matter where production time scales are potentially adversely affected.

The suitable applicant will be educated to degree in Mechanical or Aeronautical Engineering or have proven experience in relation to requirements for this role.

Knowledge / Experience required:
- Previous experience in design organisation involved in aerospace design.
- Familiar with current EASA and FAA regulations in particular CS-25.
- Excellent reporting and communication skills
- Experience with Zukon E3 desirable
- Experience in Test verification desirable
- Effective oral and written communication skills
- Good team working skills and work ethic

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Electronics Engineer - West Midlands (PKT-101779)

Apply now

Electronics Engineer
West Midlands, England

An excellent opportunity for a Electronics Production Engineer - Alternate Test Equipment, working in the West Midlands area for a leading aerospace supplier of electronic fuel control systems.
This role is based in the West Midlands, close to the M42 and is commutable from Birmingham, Solihull, Redditch and Warwick.
To design/develop hardware and software required for testing boards in aerospace products.
The work covers all aspects of board test development, from processing of board CAD for testability, design-for-test schematic and layout reviews, fixturing design, program development, in-system device programming, test system commissioning, test process validation, operator training, liaising with internal and external customers and suppliers.
You will be expected to manage board test equipment requirements for electronics products at various stages of their lifecycle.
Test program development, validation and release and technical support to production.
Requirements:

Electronics production background, with board testability analysis and device programming (JTAG). Ability to fault find electronics assemblies to component level. A health and Safety awareness. Six sigma analysis, use of Fabmaster, and C programming are desirable. Ability to analyse ATE program and fixturing problems relating to complex electronic boards

Strong interpersonal skills, ability to communicate effectively within engineering team and with external suppliers. Team player and able to work under own initiative. Drive to achieve positive results. Capable of producing professional engineering reports. Creative/ systematic approach to problem solving, assessment /management of risk. Software development experience specifically for ATE test systems development.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Electronics Design Engineer - Birmingham (PKT-101009)

Apply now

Electronics Design Engineer
Birmingham, West Midlands, England

An excellent opportunity for an Electronics Design Engineer, working in the West Midlands area for a leading aerospace supplier of electronic fuel control systems.

This role is based in the West Midlands, close to the M42 and is commutable from Birmingham, Solihull, Redditch and Warwick.

Technically responsible for meeting the customer specifications through electronic design and development of engine and airframe control products, reporting all assigned work packages directly to the lead engineer.

Will manage and train more junior Electronic Design Engineers, ensuring a standard quality through out the entire design, test and verification stages whilst ensuring ASICs and FPGAs are achieved for the customer.
Will be qualified with an Engineering Electronics degree, coupled with relevant Electronics design experience.

Will be:
EU National (unrestricted)
UK Passport holder

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Applications Engineer-Aerospace - West Midlands - £30k - 35k per year + £30K to £35K (GSI-102692)

Apply now

Applications Engineer-Aerospace
West Midlands, England
£30k - 35k per year + £30K to £35K

Applications Engineer-Aerospace-Technical Point of Liaison-Sales Background Ideal-Permanent Opportunity

Description
Our client is one of the world's leading developers, manufacturers and suppliers of precision seals and bearings supplying to the automotive, aerospace, oil & gas, food and marine industries.

Job Requirements
In this role, you'll be reporting to the Technical Manager and working within a small team; the role is primarily an interface with the customer concerning technical matters. It's a varied and challenging role that will encompass customer visits, site liaison and responding to technical questions; the role has come about as one of the current Application Engineers has moved into a sales based role. The aim of the Application Engineering team is to facilitate the application of products (bespoke sealing technology) into the customer’s end product by providing technical advice, suitability of design and advising on potential faults. You'll be regularly liaising with the sales and manufacturing teams in house to make sure they have everything they need; a person with a sales background would be suitable as this would suit an outgoing personality. You must be happy coordinating people and dealing with multiple problems at any one time; the ability to learn a product in paramount as the customers will look to you for guidance. A very varied and fun role that offers a genuine career path.

Details
This is a permanent role with an immediate start; salary to be discussed at submission stage. A market competitive salary is on offer together with a good benefits package.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Quality Engineer-Automotive - West Midlands (GSI-102690)

Apply now

Quality Engineer-Automotive
West Midlands, England

Our client provides proprietary products and innovative systems for automotive components, protect and repair construction materials and metal surfaces treatments.

You`ll be reporting to the Operations Director ensuring the Quality and Environmental Systems are maintained in accordance with the required standards. You must be competent with ISO9001:2000, TS16949 and ISO 14001 accreditations and be able to audit internally against the said accreditations.

The role comprises of managing (1 Quality Engineer and 1 Administration person), train, evaluate, motivate, delegate and monitor all staff reporting to you; it`s a very hands on role with a firm that are in the process of change. The career path is not pre determined and there are natural options to move up to Snr Quality Manager level within this division or another division of the wider group.

You will take responsibly for the paperwork systems required by the Production Department to ensure the successful processing of customers components. This will involve certain elements of an SQE role which will allow you to meet suppliers and customers; you must be happy with this although not necessarily have previous experience of doing so.

Proven Quality Engineer experience is a must, ideally in mainstream Automotive (or Tier 1/2 OEM) or Aerospace as the company supply into both sectors. Significant Quality methodology understanding is a pre requisite and in particular Root Cause Analysis and prepare 8D reports.

This is a permanent role and an immediate start, salary is market competitive and negotiable on experience.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Metallurgist - South Yorkshire - £30k - 40k per year (JDW-103092)

Apply now

Metallurgist
South Yorkshire, England
£30k - 40k per year

My client a market leading manufacturing with a global customer base require an experienced Metallurgist to join their established team.

The post holder will become part of the senior management team will help make strategic decisions within the business

Job Description

-Will be responsible for all Metallurgical and technical matters within the company
-Work with production team to maximise efficiencies within the manufacturing process and also look at new processes to development product base.
-Prepare detailed technical reports
-Enquiry and contract review to determine manufacturing processes and capabilities
-Responsible for both quality and Health and Safety
-Customer liaison to resolve any issues, including visits to customer sites

Required Experience

 
-Candidates should be degree educated in Metallurgy or Materials Science, or relevant industry experience.
-Ideally background would include both weld procedures and machined components.
-Understanding of quality procedures in a manufacturing environment
-Candidates should have experience working with a variety of metals
-Candidates should have understanding of quality systems within a manufacturing environment
-Understanding of inspection procedures
-Be able to work as part of a team and also lead teams on technical projects

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Quality Engineer - 3339 - Leicester - £27k - 33.5k per year (JDW-103213)

Apply now

Quality Engineer - 3339
Leicester, Leicestershire, England
£27k - 33.5k per year

My client a globally known market leader of construction equipment based in the Midlands.
The business is undergoing significant investment in manufacturing processes and office facilities.

Working in a modern purpose built quality and inspection department. To support this development an experienced Quality Engineer is required to ensure the efficient operation of the department

This role involves shift work, primarily supporting the night shift

Key Responsibilities

-Technical Leadership of Inspection based activities including day to day operation, strategic development of the area and development of the team members within the department
-Candidates should have experience of Faro and CMM machines
-Will be responsible for auditing the inspection area
-Provide accurate data to assist in resolution of production line and engineering issues-

Qualifications and Experience Required

-Working technical knowledge of 3D measurement machines and software
-Candidates should have the ability to read and interpret Engineering Drawings and 3D CAD Models
-Experience of using production problem solving techniques
-Worked in an manufacturing environment employing continuous techniques

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Principal Engineer - West Midlands - £45k - 55k per year + 45K to 55K+Bonus (RB-103254)

Apply now

Principal Engineer
West Midlands, England
£45k - 55k per year + 45K to 55K+Bonus

A global manufacturer of all-terrain vehicles, motorcycles, and electric vehicles, our client is cirrently seeking a Principal Engineer to lead major projects and programmes within powertrain engineering.
The Principal Engineer / Technical Team Leader - Powertrain Design has the following responsibilities:

Management of the new Powertrains and current production Powertrains that they have been allocated. This will include:
- The Design and Engineering technical decision making responsibility for their Product Groups Powertrain units.
- Establishing and maintaining plans in conjunction with Project Management, Purchasing, and Manufacturing to ensure P.D.P. builds and S.O.P. plans are adhered to
- Determine project scope in conjunction with Project Management with respect to operational excellence goals
You will be Degree qualified in Mechanical Engineering or Agricultural Engineering or equivalent, have related design experience from an O.E.M. Environment, Experience with Pro-Engineer CAD and Ansys Workbench Analysis tool is desired, also professional design experience in the powertrain design categories.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Design Engineer - Birmingham - £35k - 50k per year + 35K to 50K + Bonus + Pension (RB-103253)

Apply now

Senior Design Engineer
Birmingham, West Midlands, England
£35k - 50k per year + 35K to 50K + Bonus + Pension

A global manufacturer of all-terrain vehicles, motorcycles, and electric vehicles. Our client is currently seeking a Senior Design Engineer to work on international projects within the powertrain division.
Responsible for leading the design process of components from concept to production in order to achieve the product objectives within a specified time frame.
You will have a Degree in Mechanical Engineering, with extensive related design experience in an O.E. Environment along with having extensive experience (5,000 hours minimum) Pro-Engineer.

Experience with one or more of the following vehicle design categories: Engines and associated systems (induction, exhaust, cooling), Chassis design, Suspension systems, Braking systems and wheels, Welded structures, Bolted joints and fasteners, Castings and forgings, Sheetmetal, Electrical component specification and packaging, Accessories.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer - Birmingham - £25k - 35k per year + 28K to 35K + Bonus + Pension (RB-103252)

Apply now

Design Engineer
Birmingham, West Midlands, England
£25k - 35k per year + 28K to 35K + Bonus + Pension

A global manufacturer of all-terrain vehicles, motorcycles, and electric vehicles our client is looking for a Design Engineer. To be based in the west midlands supporting programmes for Europe.
Responsible for leading the design process of components from concept to production in order to achieve the product objectives within a specified time.
You will have a Degree in Mechanical Engineering, with related design experience in an O.E. Environment along with having experience (5,000 hours minimum)of Pro-Engineer or another 3DCAD package.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Operations Manager (Engineering/Projects) - Burton upon Trent - £35k - 45k per year + Circa £40,000 + excellent bens (JSK-98876)

Apply now

Operations Manager (Engineering/Projects)
Burton upon Trent, Staffordshire, England
£35k - 45k per year + Circa £40,000 + excellent bens

The Company has a reputation built on innovative thinking, excellence of execution and solid, yet flexible, partnerships with an impressive list of clients.

They are the premier supplier of above or below ground haulage equipment in the UK, if not the world - their equipment is specified more than any other manufacturer; and their commitment to speedy after sales support and dependable reliability is second to none.

They are looking to appoint to a newly created role for an Operations Manager who will lead and manage an Engineering and Manufacturing/Assembly operation to ensure the timely production of sound cost effective equipment in accordance with customer requirement, ensuring budgets, materials manufacturing requirements and delivery schedules are met.

Main tasks will include (but not be limited to):

Plan, manage and prioritise the workload of the Engineering and Manufacturing Department in meeting all deadlines and targets.

Ensure effective liaison with all other areas of the business to support the completion of all contracts to customer satisfaction

Liaise with Manufacturing personnel to ensure designs are produced and conform to customer requirements.

Ensure adherence by everyone to all relevant standards and practices.

Lead value analysis activity to ensure cost effectiveness of existing and new designs

Keep a watching brief on all relevant harmonised EU and ISO standards affecting the product sales within the EU countries and worldwide.

Ensure subordinate adherence to the relevant company standards and practices.

Ensure engineering drawings are in accordance with manufacturing requirements, including suppliers, as required.

Ensure the design is delivered to plan and to budget.

Project manage contracts, controlling Engineering, Buying and Manufacturing disciplines such that project budgets and timescales are met.

Provide technical support to customers as required.

This role is a unique opportunity for the right individual to contribute to the success and development of a world leading manufacturer of bespoke equipment.

This position will entail international travel, customer interface to ensure products truly meet customer needs, providing high degrees of uptime, reliability, serviceability and maintainability.

The successful candidate will be degree qualified, or equivalent, and ideally have experience in rail or off-road (eg quarry, mining etc) equipment operating in hostile environments, though consideration will also be given to candidates with a good aptitude and propensity to apply existing skills to this arena.

Benefits package will include an attractive salary, profit related bonus paid twice annually together with a contributory pension scheme, 33 days leave per annum and healthcare plan.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Production Engineer Automotive Machining - West Midlands (GSI-102270)

Apply now

Production Engineer Automotive Machining
West Midlands, England

A Production Engineering role within an automotive high performance component manufacturer. A firm that have a had very busy 2011 which is set to continue into 2012.

A medium sized company who are very specialist in the work they do; they provide automotive components to the luxury car market and beyond into Motorsport and F1.

This role is within a very fast paced and busy environment; you`ll be working under the Manufacturing Engineering Manager. The role will encompass the wider production process whilst retaining a close contact with a team of CNC operators, led by a Team Leader. You must be from a CNC background and be happy to program and operate machines to produce any first off in addition to being the point of liaison for initial technical queries.

You will need to have process experience (FMEA, control plans amongst other) and liaise with the designers to DFM stage. Previous Quality experience of TS and ISO standards is a pre requisite (ideally 14001 as well as 9001) as is experience working on CAD.

This will be a potentially very rewarding position as the company has good structure; it is a very fast paced role and you`ll be hitting the ground running as soon as you start.
The firm offer a competitive market salary and benefits package; salary to be discussed at submission stage. Overtime is available also.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Principal CAD Engineer (Exterior Trim P786) - BT 202 - Coventry (KYU-103138)

Apply now

Principal CAD Engineer (Exterior Trim P786) - BT 202
Coventry, West Midlands, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
Design and develop the Catia V5 models for the exterior trim project which will include bumpers, ornamentation and glazing
Design and develop the Catia V5 models for the exterior trim project
Store working models into structured database to support project reviews and DMU process
Degree qualified or similar qualification
Strong numeracy and literacy
Minimum of 5 y ears automotive experience is essential
Good logical reasoning
Demonstrates depth of knowledge in a relevant technical speciality
Experience in the team centre data management systems would be a benefit.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Project Manager - Warwickshire (MBI-100739)

Apply now

Project Manager
Warwickshire, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
The main duties will involve:
- Final Engineering sign off and delivery into production of the initial phase of new product development within advanced electric vehicle (EV) programme.
- Development of detail plans for future programme phases through to sign off with parent company and implementation.
- Issue management and reporting to include interaction within the change management process.
- Refining and developing key programme processes throughout the lifecycle of the project.
- Financial tracking and reporting for the complete project.
- Organising and preparing for gateway reviews, and presenting papers where required.
This highly challenging position would suit a qualified individual who has a proven background within Project Management with experience of leading project teams in the delivery of new product innovation and implementation. There will be a degree of travel both throughout the UK, Mainland Europe and Asia to ensure technical innovations and product development activities are managed within time and budgetary constraints. This role requires a logical thinking individual who has strong leadership skills in managing a team of Engineers in delivering projects within time and budgetary constraints for a world class automotive organisation.

With strong numerical, literacy and analytical skills this opportunity offers excellent career progressions and development for a forward thinking professional who is looking to work with cutting edge technology for a leading automotive supplier and OEM.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Systems Engineer, Advance Engineering - West Midlands (MBI-100732)

Apply now

Mechanical Systems Engineer, Advance Engineering
West Midlands, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
Our client a world class manufacturer of automotive modules is currently looking to develop their Advanced Engineering department with a Mechanical Systems Engineer who can support current and new project activities.

The main duties will involve:
Supporting the feasibility phase, concept phase system and vehicle programme
Review and confirm targets for selected technological applications
Define, design and manage whole vehicle preparation for advanced system integration
CAE modelling of advanced systems and vehicles (e.g. Matlab)
Detail design of components as required to support the projects
Test design and supervision
Support the transition of advanced technologies from Advanced Engineering into mainstream product development
Write and present technical information/papers to senior management
This highly challenging position would suit a qualified individual who has a proven background within Advanced Engineering (Mechanical) with involvement in delivering and leading project activities. There will be a degree of travel both throughout the UK, Mainland Europe and Asia to ensure technical innovations and product development activities are managed within time and budgetary constraints.
With strong numerical, literacy and analytical skills this opportunity offers excellent career progressions and development for a forward thinking professional who is looking to work with cutting edge technology for a leading automotive supplier and OEM. Working towards chartered status would be a distinct advantage

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Principal Product Engineer Platform Front - West Midlands (MBI-100897)

Apply now

Principal Product Engineer Platform Front
West Midlands, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.
*Lead the development of B/W of a new vehicle variant from clay model feasibility to concept release. Including concept layout, material selection, packaging and exterior surface development, DFMEA, DVP
*Manage cross functional design reviews to solve critical project issues
*Delivery will be achieved using a multi functional team
*Interface with the customer
*General internal project timing and resource plans
*Degree qualified or similar qualification minimum
*Strong numeracy and literacy skills
*Manage team of engineers and/or acknowledged industry experts in one or more areas with 3 - 5 years experience
*Minimum of 10 years automotive experience essential
*Understands roles and needs of different client groups
*Ensure procedures and quality standards are clearly communicated and implemented
*Capable of managing complex projects
*Take response for process improvement
*Likely to be chartered engineer

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Chassis Design Engineer - Warwickshire - £25k - 45k per year + Market rate (MBI-102823)

Apply now

Chassis Design Engineer
Warwickshire, England
£25k - 45k per year + Market rate

UK Based

Our client a world renowned automotive solutions provider is currently looking to strengthen it Engineering Division with Chassis Designers and Chassis Engineers to support ongoing project demands.
With an excellent working knowledge of Chassis products from a design, development and validation you will responsible for;

Carrying out CAD chassis design work
Produce packaging models and detailed designs of components and systems
Manage your own Engineering activities to ensure project delivery
Produce FMEA s and Engineering reports
Investigate, asses and evaluate new technology
Interrogate FEA and ADAMS results
Liaise with suppliers and customers to ensure product innovation and solutions meet the necessary standards and functionality requirements.
Applications are welcomed from qualified individuals who have experience of suspension, steering or chassis related products from within the automotive or associated industries to include off road vehicles. Successful candidates will have a working knowledge of 3D CAD packages and have the ability to take products from concept through to feasibility.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineers - Berkshire (PBA-100033)

Apply now

Design Engineers
Berkshire, England

Xtrac Ltd is a world leading supplier of high performance transmissions, they are now looking for Design Engineers to be responsible for the design and detail of engineering components and complete systems, using the companies 3D CAD system to defined standards. This is an excellent opportunity to join a company that for over two decades has ensured that customers from all sectors meet, or even exceed, their targets by drawing on their unique blend of design, engineering and manufacturing capabilities. Specialising in Transmission Technology, supplying the Aerospace, Automotive, Defence, Marine and Motor Sports Sectors.



The Design Engineer will be responsible for CAD modelling and drafting on Unigraphics, creating and issuing of Engineering Drawings. Establish, maintain and manage a strong working relationship with new and existing customers, at all levels.

Work as part of the core Engineering team - utilising the skills and experiences of Gear Technology, Production Engineering and key shop floor personnel.

Liaise with and provide guidance to the Commercial Function and Manufacture Project Managers.

Maintain suitable issue control and Bill of Materials for the parts and projects and in a timely fashion.

Advise corrective action to shop floor queries and non-conformance.

Carry out any reasonable additional duties as requested by management.

Candidates will be degree qualified ideally with experience of gears, gearbox, transmission/driveline systems or similar high-precision rotating components. Use of Unigraphics NX.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Graduate Design Engineer - West Midlands (KSA-103236)

Apply now

Graduate Design Engineer
West Midlands, England

Our client designs, develops and manufactures highly complex intelligent safety systems for global vehicle manufacturers. They are a global organisation supplying more than 40 major vehicle manufacturers. An exciting opportunity has arisen to join their graduate programme as a design engineer.

They are looking for enthusiastic, driven and self motivated graduates to join their engineering team. You ll have the opportunity to fully utilise and develop your engineering and technical skills, through working on the design of cutting-edge safety systems. If you are an ambitious individual who is keen to join a team and develop within the role then this could be the role for you.

Graduates will need the following skills and experience:-
-Mechanical engineering degree
-Strong engineering knowledge
-Strong Catia V5 knowledge
-Strong analytical and problem solving skills -Strong team working abilities
-Effective communication skills
-Good organisation skills
-Flexibility to adapt in an exciting, fast paced working environment
-Willingness to travel to customers, suppliers and conferences, occasionally abroad.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Embedded & Senior Embedded Control Systems Engineers - Leicestershire - £30k - 50k per year + 30K to 50K + excellent benefits (JSK-103145)

Apply now

Embedded & Senior Embedded Control Systems Engineers
Leicestershire, England
£30k - 50k per year + 30K to 50K + excellent benefits

My client is a leading clean power systems company. Their proprietary clean fuel and clean power technologies provide solutions to the difficult environmental and energy supply challenges being faced by governments and industry.

They are looking to appoint Embedded and Senior Embedded Control System Engineers who will be responsible for the design and development of control systems for modular stacks and systems.

Further responsibility for System software design, embedded software development, System integration, Fault finding, Diagnostics, Analysis and reporting of in-service events and development of necessary PC based applications.

• Technical evaluation of programme deliverables, interpret requirements and specifications, identify problem areas and clarify through effective internal and external communication
• Determine requirements for software architecture. Advise on Controller specific hardware requirements. Develop Controller software conforming to company guidelines. Write test applications for system development. Assist with system commissioning. Conduct fault diagnostics, bug fixes and impact analyses for changes.
• Liaise with company and external representatives to meet all contractual and specification requirements and coordinate project activities.
• Prepare documentation following the product lifecycle - Functional Design Specs, System Design Specs, User Manuals, Test/commissioning procedures etc.,
• Implement, test and document embedded controller software for applications using appropriate tools and work with colleagues from other departments, customers etc.
  
  Qualification and experience
• You will have a degree or equivalent and musthave experience of working with embedded controllers written in C/C++
• You must have experience with designing and building control systems using microcontrollers or DSP technology.
  
  Skills
• Understand and implement real time control Hardware and Software
• Excellent understanding of C/C++
• Good working knowledge of comms protocols inc. RS232, SPI and CAN
• PC Windows OS based programming and hardware interfacing
• Good Understanding of Object Orientated Programming
• Excellent communication and presentation skills
• Methodical approach
• Working knowledge of Matlab/Simulink, Visual Studio and C# is desirable

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Sourcing Manager - Landing Gear - Gloucestershire - 45000-55000 (SMA-103228)

Apply now

Sourcing Manager - Landing Gear
Gloucestershire, England
45000-55000

The company currently supplies electronic systems to the aerospace industry for both civil and defence applications. The role of Sourcing Manager-Landing Gear is very much a hands on role, so project and planning experience is essential as is demonstrable experience in a sourcing position. In this role you will integrate and develop processes that meet business needs across the organisation, manage complex issues within functional area of expertise, be involved in long-term planning, and contribute to the overall business strategy.

The role: To develop, plan, and manage programs to meet company purchasing commitments in Sourcing, manage the complete purchasing and contract administration functions as required to meet program commitments, develop sourcing strategy targets on quality, price, delivery and service necessary to meet requirements, implement and maintain a quality improvement process targeting reduction in product variation and product losses using key management tools, collaborate with manager in setting realistic and challenging operational goals and contribute to their accomplishment and periodically prepare and implement supporting work plans. You will also manage Buyer/Contract Administrators in fulfilling purchasing commitments and organise the appropriate program plans, provide for the evaluation of vendor quotations utilising appropriate negotiation and purchasing analysis techniques and implementation of proper contracts with emphasis on quality, price, delivery and service necessary to meet requirements.

You must be degree qualified and a procurement based career/strong manufacturing procurement background is essential as is cost reduction experience. Knowledge of the China market would be ideal.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Electrical Engineer - Leicestershire - £35k - 50k per year + to 43K + excellent benefits (JSK-103141)

Apply now

Senior Electrical Engineer
Leicestershire, England
£35k - 50k per year + to 43K + excellent benefits

My client is a leading clean power systems company. Their proprietary clean fuel and clean power technologies provide solutions to the difficult environmental and energy supply challenges being faced by governments and industry.

They are now looking for a Senior Electrical Engineer to apply electrical and electronic engineering design and prototype build skills in the development of design of modular stacks and systems.

Key accountabilities include:

• Use a degree of innovation and technical judgement to interpret programme manager requirements and devise appropriate solutions for novel and complex problems.
• Understand resource requirements, risk and technical quality to ensure delivery of effective solutions
• Operate change management during engineering drawing updates to ensure configuration control is maintained and best practice/lessons learned are shared effectively amongst peers
• Provide feedback to line manager and peers on appropriate software, analytical and IT tools for the job and recognise possible training requirements
• Work with Programme Managers to deliver acceptable designs and solutions
• Apply safe and reliable design to products and systems with particular interest in electrical safety and EMC
• Aid in the timing and scheduling of new programmes with peers and colleagues
• Understand any standard tests and acceptance criteria for stacks, systems and key components relevant to the design to ensure effective delivery
• Support Research team in the application of blue sky concepts in end-user systems
  
  Qualifications
• Essential is a degree or higher in Electrical/electronic Engineering supplemented with a post graduate qualification or relevant industrial experience. Alternatively non-degree with over 12 years of relevant industry experience. Desirable would be a higher level qualification
  
  Experience
• Electrical Panel Design/Assembly
• Electronic and electrical prototype/assembly
• PCB design/assembly
• Fault Finding at PCB and System level,
  together with at least 6 of:
• Power electronics
• wiring harness
• Voltages to 600V
• Automotive electronics
• Electric Vehicle Powertrain
• PAT Testing/electrical safety
• PLC
• EMC
• LVD CE Marking
• Microprocessors (PIC/TI)
• Circuit simulation
• Instrumentation/data acquisition
• Mechanical knowledge

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Project Engineer - Shropshire - 25K to 35K (STR-103093)

Apply now

Project Engineer
Shropshire, England
25K to 35K

An opportunity for a Project Engineer has arisen with a leading global supplier of advanced technology, systems and components - diverse product line includes car air conditioning and heating systems, electrical automotive and electronic control products, fuel management systems, radiators, instrument panel clusters, filters, robotics, telecommunication products and information processing devices.
The main purpose of the Project Engineer role is to understand and realise production engineering strategic goals and objectives. To deliver and improve products and processes through the use of process flow, P-FMEA tools, and to effectively manage change.

As Project Engineer you will also be responsible for defining long term plans and actions to reduce leak and scrap ratios, and ensuring the management of new tooling introduction through timing and ISIR control.
The successful Project Engineer will be degree / HND qualified in a relevant discipline, extensive production engineering experience is required.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Mechanical Design Engineer - Leicestershire - £35k - 50k per year + to 43K + excellent benefits (JSK-103140)

Apply now

Senior Mechanical Design Engineer
Leicestershire, England
£35k - 50k per year + to 43K + excellent benefits

My client is a leading clean power systems company. Their proprietary clean fuel and clean power technologies provide solutions to the difficult environmental and energy supply challenges being faced by governments and industry.

They are looking to appoint an additional Senior Mechanical Design Engineerwho will apply their acquired engineering skills in mechanical design engineering for the development of modular stacks and systems. Key accountabilities

• Using a high degree of innovation and technical judgement to interpret programme manager and customer requirements and devise appropriate solutions for novel and complex problems.
• Understand resource requirements, risk and technical quality to ensure delivery of effective solutions to problems.
• Operate change management during engineering drawing updates, to ensure that configuration control is maintained, and best practice/lessons learned are shared amongst peers.
• Provide feedback to line manager and peers on appropriate software, analytical and IT tools for the job and recognise possible training requirements.
• Understand any standard tests and acceptance criteria relevant to the design, to ensure effective programme / customer delivery.
• Recognise outside resources, such as design sub-contractors, and notify line / programme manager where supplementary capacity and skills may be required.
• Understand the requirements and impact of relevant National, European and International standards on design.
• Apply safe design of products and systems, with particular interest in hydrogen safety, pressure and machine safety.
• Aid in the timing and scheduling of new programs with the Mechanical Design manager / PMO / Director of Engineering.
• Be able to act as responsible lead of function in absense of group manager and any higher ranked group peer, in event of their unforeseen absence, or holiday with appropriate notification period.
  
  Essential: Degree level qualification in Mechanical or Manufacturing Engineering, supplemented with postgraduate engineering qualification OR relevant industrial experience. Non-degree qualifications suffice with extensive industrial experience.
  Experience
  Essential experience:
• 3D CAD software (Solidworks) use and proficient drafting of engineering drawings
• Excellent knowlege of mechanical engineering and design of systems
• Knowledge of manufacturing processes for prototyping and concept development
• Application of standards, codes and regulations to design
• Interdisciplinary teamworking
• Building relationships with potential suppliers
• Application of appropriate calculation methods for mechanical design
• Presentation of design solutions using appropriate media
  Essential skills:
• Computer literate - Proficient at Microsoft Office
• Work with cross-discipline teams
• Fully understand and draft an engineering drawing
• Fully understand and draft PandI schematics for fluid mechanical systems
• Check and sign-off engineering drawings
• Apply thermal and fluid knowledge to the design of relevant components

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Production Supervisor - Castle Bromwich (LHI-102867)

Apply now

Production Supervisor
Castle Bromwich, West Midlands, England

A new temporary 4-6 week contract opportunity has arisen for a Production Supervisor in the Birmingham area.

Reporting to the Operation Manager, the individual will work within the Production team and have the following key deliverables / KPIs:

- Blow Rates and 5S.
- Improve OEE.
- Health, Safety and Environmental concerns.

Responsibilities to include, but not limited to:
- Manage operators in all aspects of production / finishing ensuring good communication on hand over of tasks
- Effective budgetary management
- Successful introduction of NPI and Engineering Change through excellent cross-functional working
- Supervise and co-ordinate daily activities of the production team
- Ensure safe and efficient operation of power presses / machines focussing on improving strike rate, part quality and reducing downtime
- Ensure shop floor management IT systems run in a real time environment with 100% reconciliations of hourly production runs
- Ensure production department adhere to ISO TS16949 quality management system requirements
- Ensure that the shift work to their standard operation instructions and meet the requirements of productivity / quality, health and safety
- Manage issue of consumables and PPE within budget
- Monitor production, recording hourly performance in absolute detail of parts produced / good /scrap /rework and downtime
- drive and monitor SMED activities on tool change
- Ensure that housekeeping and 5S activities are carried out as required
- Manage weekend production activities and ensure adequate cover is provided
Role Requirements:

- Certificate (GCSE) in Maths and English (or equivalent)
- Must be computer literate, have demonstrable MS Office ability
- Previous press operating experience with large scale, high speed, automated presses producing aluminium and steel A class panels.
- Good written and oral communication skills

General Skill Areas:

- Product knowledge
- Manufacturing knowledge
- Quality systems (post training)
- Communication to peer group
- Overhead crane and fork truck licence an advantage

Interpersonal Skills:

- Approachable
- Balanced view
- Listening ability
- Rational and pragmatic in detailed discussions / debates
- Ability to think through proposals and ramifications

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Quality Inspector / CMM Operator - Zeiss Calypso - Northampton (KH-103127)

Apply now

Quality Inspector / CMM Operator - Zeiss Calypso
Northampton, Northamptonshire, England

Our Client designs, develops, and manufactures powertrain components for use within the motorsport industry. They are currently seeking to recruit a Quality Inspector/CMM Operator for a new 6 month contract opportunity.

Reporting to the Inspection Group Leader, the individual will be responsible for the following:

* Using specified sample plans, check mechanical components to ensure parts meet specification for example: sheet metal fabrications, castings, machined components, and carbon fibre.
* Check certificates of conformity and items are correctly part and batch numbered
* Carry out detailed inspection and measurement of first-off samples utilising GDandT
* Program and/or Operate Co-Ordinate Measuring Machines (CMMs)
* Compile concession information and create reports / overview, communicate effectively with Manufacturing, Planners and Quality Engineers and the wider business as appropriate
* Maintain computerised inspection for the inspection activities, such as non-conformance reporting.


Essential Requirements:

- MUST be able to use Zeiss Calypso.
- Previous Inspection experience within a low volume high value precision engineering manufacturing environment.
- Experience inspecting parts manufactured for Automotive and / or Aerospace.
- Capable of using standard inspection equipment and able to read engineering drawings.
- Programming or Experience Operating CMMs (Zeiss Calypso, Umess, PCDMIS or Mitutoyo Cosmos software)
- Use standard testing tools, (calipers, depth gauge, microscope)
- Craft Apprenticeship and/or Mechanical NVQ
- Excellent communication skills
- Highly organised with good attention to detail
- Ability to rigorously follow defined processes
- Ability to flex and work under pressure to meet tight deadlines
- Ability to work alone or as a member of a team

Desirable Attributes:

- Have critical thinking skills and be able to read and communicate with CMM reports
- SAP experience
- Appropriate training in inspection methods - 1st Principal
- MS Office skills

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

CAE Product Engineer (Chassis Systems) - Solihull (KYU-102932)

Apply now

CAE Product Engineer (Chassis Systems)
Solihull, West Midlands, England

Our client is a major automotive component supplier manufactures high integrity, engineered, electro-mechanical systems. With strong vision and investment plans, and an excellent order book, they now seeking to appoint a CAE Product Engineer (Chassis Systems) on a permanent basis in Solihull.
With the growing EPS business it is critical to assess the product performance early in the development process by utilising virtual CAE methodologies.

As CAE Product Engineer, you will be responsible for conducting CAE simulation tasks, focusing on structural strength, stiffness, durability and NVH related attributes. You will be provided with challenging opportunities to expand existing and new methods in a global environment along with:
* Liaise with, and provide support to, the mechanical design teams in the CAE analysis of steering systems and components to ensure compliance with customer specifications and legal requirements
* Interface with customer CAE departments to ensure proper delivery of CAE models and results according to agreed timelines and processes
* Create, analyse, modify, and post process mathematical models and correlate to test data. You will be required to interpret results with a view to improving the design of the product against given design criteria
* Generate work

Applicants are required to have the following experience:
Essential -
* Educated to degree standard with solid mechanical and numerical analysis background
* Solid knowledge in one or more of the typical commercially available FEA software packages such as
Abaqus, MSC/Nastran, ANSYS, HyperWorks and LMS Virtual.Lab
* Familiar with the analysis of chassis components and systems in terms of Noise Vibration and Harshness, Stiffness, Strength and Durability

Desirable -
* Ability to work to given timescales and prioritise projects
* Team player with excellent communication skills; able to provide technical information both verbally and in technical reports or presentations
* Basic knowledge of system level dynamic modelling would be advantageous
* Knowledge of 'Six Sigma' methodologies would be advantageous
* German language skills advantageous

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Principal Engineer - Steering Systems - Solihull (KYU-102931)

Apply now

Principal Engineer - Steering Systems
Solihull, West Midlands, England

Our client is a major automotive component supplier manufactures high integrity, engineered, electro-mechanical systems. With strong vision and investment plans, and an excellent order book, they now seek to appoint a Principal Steering Systems Engineer on a permanent basis in Solihull.

As the Principal Steering Systems Engineer for Intermediate Shafts, you will head the development of I-shafts from concept through to launch in close cooperation with our suppliers. In this role you will lead a team of project engineers as well as:
* Requirements Capturing: Working with customer teams to capture and flow-down vehicle manufacturer specifications to component level
* Product Design and Development: Leading a team of qualified engineers and cooperating with Global component suppliers to generate market-leading innovative solutions
* Design Validation and Release: Compile comprehensive validation plans for design release into customer application programmes
* Innovation: Identify future trends and technologies to maintain market competitiveness

Applicants are required to have the following experience:
Essential:
* Educated to degree level or equivalent
* Experience in product development in automotive industry
* Self motivated and able to work without direct supervision
* Willing to travel globally
* Strong supplier facing skills

Desirable:
* Second European language

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

NVH Principal Engineer - Solihull (KYU-102927)

Apply now

NVH Principal Engineer
Solihull, West Midlands, England

Our client is a major automotive component supplier manufactures high integrity, engineered, electro-mechanical systems. With strong vision and investment plans, and an excellent order book, they now seek a to employ a NVH Principal Engineer on a permanent basis in Solihull.

As NVH Principal Engineer, the role involves a wide range of NVH related tasks ranging from leadership of NVH tasks towards external
customers and suppliers as well as internal ones to simple FRF test work for identifying first bending modes and to complete sub system NVH in the vehicle environment. You will be involved in continuous development and updating of NVH test methodologies, and expectation is given to new ideas and proposals, too.

Applicants will need to:
* Lead own NVH tasks defined for and in the NVH team within EPS Column Drive
* Investigate, measure, analyse and report on NVH issues at any level using structured test
methodologies to prevent production issues
* Develop NVH specifications for the system and cascade them from vehicle to component level
* Provide support to production sites around the World
* Develop new component level specifications using proven test methodologies
* Carry out administration tasks as time booking, report creating, etc. in timely manner

Applicants are required to have the following experience:
Essential:
* Extensive experience in practical NVH measurements and problem solving
* Degree level qualified in a related subject area or proven practical experience
* Experience with steering and steering products like bearing and motor noise would be advantageous
* Experience with industry standard NVH equipment, LMS, PAK, Head Acoustics etc.
* Matlab and / or Labview with some programming expertise preferred

Desirable:
* Leadership of projects or program would be advantageous
* Experience in performing operating deflection shape measurements and modal analysis would be
advantageous, performed using LMS Test Lab
* Experiment design experience using DOE, Shainin and / or Six Sigma methodologies would be
advantageous
* German language skills advantageous

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Principal Engineer - Chassis Systems - West Midlands - £25k - 50k per year + Market Rate (KYU-96704)

Apply now

Principal Engineer - Chassis Systems
West Midlands, England
£25k - 50k per year + Market Rate

Brake Systems Engineering is responsible for delivering some of the latest automotive safety features such as ESC and Brake Assist, using cutting edge technologies to enhance driver, passenger and pedestrian safety.

Your work will be validated on test tracks and race circuits around the world, and at our winter testing facility on the frozen lakes of north Sweden

As part of this team, you will develop your expertise in:
Control algorithm development: Creation of new techniques/processes for slip control systems, requiring excellent software coding skills and a sound background in vehicle dynamics to realise the astonishing levels of control possible .
System Application: Tailoring of electronic systems to meet the needs of a global customer base and ensure that legal, customer, performance and safety standards are achieved
Vehicle test: On the frozen lakes in northern Sweden and proving grounds around the world, the engineering of slip control systems requires professional levels of vehicle control skills together with the discipline to consistently repeat demanding limit-handling manoeuvres
Data Logging Systems: In-house data acquisition system allows high speed monitoring of analogue, thermal, high-speed serial and CAN data channels. With other industry standard logging tools, the ability to interpret data from the logging systems play a major part in performance analysis and enhancement.
Customer management. To ensure that the development process runs smoothly, regular direct contact with the customer is essential, from defining system requirements to final performance sign-off.
What we are looking for:

Essential:

Educated to degree standard
Experienced in vehicle development and high-speed test track driving
Familiar with C programming language for PC and embedded applications
Familiar with Vector CAN products, including customising for use in system calibration

Desirable:

Self motivated and able to work without direct supervision
Excellent communication skills, particularly reporting
Ability to work with MS Office applications
Willing to travel extensively, and for several weeks at a time
German language skills advantageous

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Catia V5 Design Engineer - Interior Trim - Coventry (KYU-101002)

Apply now

Catia V5 Design Engineer - Interior Trim
Coventry, West Midlands, England

Our client is one of the world`s leading commercial vehicle manufacturers. Established for more than 60 years its product line-up has, more recently, moved into the design and manufacture of passenger cars, including electric vehicles.


A new 6 month contract opportunity has arisen for a Principal CAD Engineer, specialising in Interior Lower Trim.

Based in Coventry, the individual will be responsible for the following:

- Design and development of Catia V5 models for the lower trim of a vehicle variant, including rear quarter trim, load floor and stowage bins.
- Store working models into structured database to support project reviews and DMU process.


Essential Requirements:

- Minimum of 5 years automotive experience is essential
- Degree qualified or similar qualification.
- Experience in the use of Teamcenter data management systems
- Able to demonstrate a depth of knowledge in a relevant technical speciality
- Effective team member contributing to improvements and high customer service.
- Good logical reasoning
- Strong numeracy and literacy

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Powertrain Engineering Manager - Preston (IHU-102500)

Apply now

Powertrain Engineering Manager
Preston, Lancashire, England

Leyland Trucks is the UK s largest commercial vehicle manufacturing business and has established an enviable track record of profit and growth, a wholly-owned subsidiary of PACCAR Inc - PACCAR is a global technology leader in design, manufacture and customer support of high-quality light, medium and heavy-duty trucks under the Kenworth, Peterbilt and DAF nameplates. Since Leyland Trucks was acquired by PACCAR in 1998, it has become the group`s established centre for light and medium truck design, development and manufacture. Recently awarded the prestigious "Shingo Bronze Medallion", an award that is recognised as the premier award for manufacturing operational excellence. Leyland Trucks are only the 3rd UK company to be recognised with this award since its inception in 1988.
An exciting and demanding opportunity for a talented automotive professional to work with the country s largest Commercial Vehicle Manufacturer and lead all engine and transmission vehicle development within Leyland Trucks.
The successful Powertrain Engineering Manager will have the following skills and experience :-
I. Educated to degree level in Engineering and hold Chartered Status.
II. Strong team management experience and possessing excellent man management skills to motivate and mentor your team.
III. Proven technical leadership and autonomy in key Powertrain areas.
IV. Strong exposure to Continuous Improvement techniques.
V. Experience of delivering major automotive projects.
VI. European language skills would be an advantage.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Quality Manager - Pinxton - £40k - 50k per year + Benefits (PBU-102343)

Apply now

Quality Manager
Pinxton, Derbyshire, England
£40k - 50k per year + Benefits

Our client is a world leader in the manufacture and repair of gas turbine components, and due to it`s on-going growth in the UK market is seeking to appoint an experienced Quality Manager. If you feel you meet the criteria below, please apply along with your CV for consideration

• As Quality Manager you`ll have full responsibility for the all quality activity established within the Company to include the development, update and maintenance of all documented systems and procedures, to include the Maintenance Organisation Exposition.
• Ensure that, at all times, the Quality requirements established in the Company meet defined customer approval and Airworthiness regulations are maintained and actively controlled.
• Overall authority to develop and introduce such systems and procedures necessary in order to maintain continued Airworthiness compliance, and shall be afforded the power to veto, as necessary.
• The Quality Manager will report on day to day activities to the Deputy Managing Director of the Company but as a tradition in the Company, will also continue to liaise with the Managing Director of the Company on all major quality issues and systems for final authorisation.
• Must be Degree Qualified
  
  Must have Aerospace background, Quality Experience, FAA / EASA / CAA

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Manufacturing System Support Analyst - 2793 - Peterborough - £0 per hour + �30/hr - �35/hr Ltd Co. rate (LHI-103149)

Apply now

Manufacturing System Support Analyst - 2793
Peterborough, Cambridgeshire, England
£0 per hour + ?30/hr - ?35/hr Ltd Co. rate

The Manufacturing Engineering System Support Analyst will be a member of the Manufacturing and Assembly System Support Team.Their primary responsibilities are to provide 1st and 2nd line application support to multiple facilities including China.
KEY RESPONSIBILITIES:
Responding to system incidents and requests from systems users in the factory
Feeding into ITIL problem processes and root-cause analysis
Support implementation of system changes
Working as part of a team of 4 system analysts, but also as part of a wider support team
Work to strict time constraints to ensure smooth running of the production
QUALIFICATIONS, SKILLS and EXPERIENCE REQUIRED:
Essential:
Experience in any of the following applications advantageous:
o Oracle Database, Proficient in Oracle and Access SQL, ideally with the ability to understand and debug PL/SQL code.
o Atlas Copco Toolsnet
o Proficient in Microsoft Visual Basic 6, including the ability to understand and debug applications that include Oracle and Access database integration.
o VB .NET
Basic UNIX/LINUX skills, e.g. find, grep and vi and AWK commands for data manipulation purposes
Prior experience IS in manufacturing systems environment is preferable though not essential.
Knowledge of manufacturing processes
Desirable:
Perl programming / scripting knowledge
Understanding and experience of working to ITIL processes, primarily Incident, Change and Problem.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Principle Engineer - Electronics - Oxfordshire - £38k - 50k per year + Benefits (PBU-103173)

Apply now

Principle Engineer - Electronics
Oxfordshire, England
£38k - 50k per year + Benefits

Our client is a leading technical supplier to the automotive industry, and due to exceptional growth plans and current business requirements, they are looking to appoint a Principle Engineer - Electronicsas such we welcome applicant who meet the criteria below:

• Design and development of electronic circuitry (includes analogue, digital, microprocessor and power electronics)
• Electronic circuit simulation and analysis
• Specification and selection of electronic components
• Preparation of electronic schematics and associated PCB layouts
• Testing and evaluation of electronic components
• Validation of electronic systems
• Preparation of FMEAs and design validation documentation
• Preparation and monitoring of project plans You will need to educated to degree level in Electronics Engineering or similar with a minimum of 5 years industry experience in Electronics.
  You must possess good attention to detail and have a practical approach to problem solving.
  
  Must haves include:
• Experience in analogue, digital, microprocessor circuit and power electronics design
• Use of CAD to produce electronic circuit schematics and PCB layout
• Good understanding of robust engineering practices such as FMEAs, Change Management, Design Reviews, etc
• Knowledge of automotive communication protocols, particularly CAN

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Information Systems Business Analyst - 2849 - Peterborough - £0 per hour + Contract rates apply (LHI-103147)

Apply now

Information Systems Business Analyst - 2849
Peterborough, Cambridgeshire, England
£0 per hour + Contract rates apply

The Business Analyst will be a member of the Application Development Team based in Peterborough. Their primary responsibilities will include project management and development of new GIS processes and systems to support all core business processes.

These roles are important to automate all of the electronic data interchange messages, helping to achieve a huge cost reduction in the business by means of efficiency savings. Assisting the business in scoping, analysing, testing and implementation of existing and new business systems.
Responsibility for system solutions (from analysis, design, specification, testing and documentation) exploiting standard MFG/Pro functionality where possible
Working with internal customer groups i.e. different departments and functions - in detailed requirements definition, process development, user test support and user training
Providing 3rd level support to internal customer groups
Working with members of global matrix teams
Follow ITIL (Information Technology Infrastructure Library) and SOx (Sarbanes Oxley) processes where necessary
Active participation in process improvements with a strong focus and desire to maximise efficiency
KEY COMPETENCIES:
1. Analysis
2. Planning and Organisation
3. Communication
4. Customer Focus
5. Decision Making
6. Contributing to team success

QUALIFICATIONS, SKILLS and EXPERIENCE REQUIRED:
Essential:
QAD MFG/Pro (eB2)
Desirable:
QAD EDI ECommerce
Knowledge of Progress CHAR Version 9
Manufacturing business knowledge
Development methodology principles and Six Sigma techniques
Streamserve

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Design Engineers - Aerospace - Leicestershire (GSI-103154)

Apply now

Design Engineers - Aerospace
Leicestershire, England

Our client acquires, develops and applies new ideas and improved components to support their customer s products. They also offer design, development, manufacture and software services and products to the aerospace, space, energy and transport industries.

The firm are seeking 5 Design Engineers to help them out with another order that they have won; 2011 has been a strong year for the firm and 2012 sets to be just as busy.

We are seeking people with proven mechanical engineering experience in the aerospace industry and in particular, gas turbines.

You will need to be degree educated in a relevant engineering or aerospace discipline also and be proficient with Unigraphics CAD package.

This is an immediate start on contract for 6-9 months initially in duration. Excellent rates based on a full time position of 37 hours a week.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Design Engineer / Project Engineer - Hinckley - £25k - 40k per year + 31K to 42K (PBU-103166)

Apply now

Design Engineer / Project Engineer
Hinckley, Leicestershire, England
£25k - 40k per year + 31K to 42K

Due to impressive growth plans is seeking to appoint a Design Engineer / Project Engineer to strengthen the engineering team and to help drive and support the development of current and future product ranges In this role you`ll be given Design projects in a true cradle to grave environment, given total ownership of the project life cycle, whether this is a large project, or centred on individual components

Utilizing your existing skills, you will also be trained from day one in company standards and procedures to ensure you are able to make an outstanding contribution as part of a flexible work force, which thrives on producing a world class product.

Knowledge of Pro Engineer / Wildfire would be good but not essential due to in-house training facilcities (knowledge of other 3D CAD systems is equally useful)

• Educated to at least a 2:2 degree in Mechanical / Automotive Engineering.
• Proven track record as a Design or Project Engineer
• Flexibility to travel to Europe and occasional worldwide locations
• Driven to succeed

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Mechanical Design Engineer - Leicestershire - £25k - 35k per year + 25 to 32K + benefits (JSK-103139)

Apply now

Mechanical Design Engineer
Leicestershire, England
£25k - 35k per year + 25 to 32K + benefits

My client is a leading clean power systems company. Their proprietary clean fuel and clean power technologies provide solutions to the difficult environmental and energy supply challenges being faced by governments and industry.

They are looking for a Mechanical Design Engineer who will apply their engineering skills in mechanical and thermo-fluid design of modular stacks and systems.

Other Key accountabilities include:

• Use a degree of innovation and technical judgement to interpret programme manager requirements and devise appropriate solutions for novel and complex problems.
• Acknowledge resource requirements, risk and technical quality to ensure delivery of effective solutions to problems.
• Operate change management during engineering drawing updates, to ensure configuration control is maintained, and best practice/lessons learned are shared effectively amongst peers.
• Provide feedback to line manager and peers on appropriate software, analytical and IT tools for the job and recognise possible training requirements.
• Work with programme managers to deliver acceptable designs and solutions.
• Understand any standard tests and acceptance criteria for stacks, systems and key components relevant to the design, to ensure effective programme delivery.
• Recognise outside resources, such as design sub-contractors, and notify line / programme manager where supplementary capacity and skills may be required.
• Understand the requirements and impact of relevant National, European and International standards on stack and system design.
• Apply safe design of products and systems, with particular interest in hydrogen safety, pressure and machine safety.
• Aid in the timing and scheduling of new programs with the Mechanical Design manager.
• Support RandT in the application of blue-sky concepts in end-user systems. Qualifications
• Essential: Degree level qualification in Mechanical or Manufacturing Engineering. Non-degree qualifications suffice with relevant industrial experience of more than 7 years.
• Desirable: A relevant postgraduate qualification or additional relevant work experience of 3 years.
  Essential experience:
• 3D CAD software use and proficient drafting of engineering drawings (ideally Solidworks)
• Excellent knowlege of mechanical engineering and design of systems relevant to fuel cells
• Knowledge of manufacturing processes for prototyping and concept development
• Interdisciplinary teamworking - Finding and building relationships with potential suppliers
• Application of appropriate calculation methods for mechanical design
• Presentation of design solutions using appropriate media
  
  Essential skills:
• Computer literate
• Proficient at Microsoft Office
• Work with cross-discipline teams
• Fully understand and draft an engineering drawing
• Fully understand and draft PandI schematics for fluid mechanical systems
• Use a 3D parametric CAD package proficiently
• Check and sign-off engineering drawings

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Senior Buyer - 20830 - £20.16/hr Ltd Co. rate - West Midlands - £20.16 per hour Limited (GWOC-103153)

Apply now

Senior Buyer - 20830 - £20.16/hr Ltd Co. rate
West Midlands, England
£20.16 per hour Limited

Part of a global organisation, this well established manufacturer of luxury vehicles is currently enjoying success within the market place. They have invested over £200m in new equipment and are at the forefront of modern manufacturing practices.

We are seeking to appoint a Senior Buyer on a 12-month contract based in Coventry.

As Senior Buyer, you will support a high profile business strategy deployment to represent the purchasing function within a fast paced cross functional team in delivering a critical sourcing project.

The individual will need to possess a wide breadth of experience and capability to successfully lead and co-ordinate the full scope of requirements to support a flawless project delivery. There will be an expectation for the individual to travel frequently around the UK to ensure all aspects of the supply chain and project delivery are addressed accordingly. A high focus on cost management and control will be required, and involvement in Contractual Negotiations will be a key aspect of the project. Full cross functional involvement will be essential to ensure a complete understanding of project priorities and needs.

As the Purchase Department lead representative, you will be required to collate project status reports and present the status/issues to the wider project team and senior management within the business. Regular 1st and 2nd tier supplier visits will be required to ensure successful implementation of the project needs within a very aggressive project delivery timeframe.

Skills Required:
* Strong Cross-Functional working experience and holistic business understanding required.
* Excellent organisation and project management skills essential.
* A background in understanding manufacturing process` and environments critical.
* Strong commercial acumen required as the position will involve being the primary point of commercial contact between the company and the primary 1st and 2nd suppliers.
* Experience of contract management required to facilitate innovation of existing contracts and creation of new contracts where required with the support of their Legal Dept.
* Ability to operate within a fast paced challenging environment required to ensure flawless project delivery with a very aggressive timeframe.
* Negotiation skills.
* Report generation and presentation skills, confidence and strength of character.
* Experience of working as a buyer preferable and experience of physically working within a manufacturing role also preferable.

Applicants must be educated to PRINCE 2 Project Management including CIPS and an Engineering or Manufacturing qualification.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Programme Manager - Leicestershire - £40k - 60k per year + to 58K + excellent benefits (JSK-103137)

Apply now

Programme Manager
Leicestershire, England
£40k - 60k per year + to 58K + excellent benefits

My client is a leading clean power systems company. Their proprietary clean fuel and clean power technologies provide solutions to the difficult environmental and energy supply challenges being faced by governments and industry.

They are looking to appoint a Programme Manager who will report to the Operations Director and will technically lead designated programme(s) and be accountable for delivery. The role will also plan, execute, control and finally close programmes in accordance with the company best practice directives. It will also be necessary to interface with the relevant sales and business development lead, programme customer / partners throughout the various stages of the programme process.

Principal Accountabilities include:

• Accountable and responsible for programme delivery within time, budget and to specification
• Assist with structuring and costing of programmes (via PIAP process)
• Support project managers and senior project mangers
• Interface with UK Dir Eng, Ops and RandT and UK Bus Dev with regards to best practice IPM
• Maintain programme plan
• Create and maintain programme work breakdown structure
• Allocation of budget and tasks
• Monitor programme performance
• Manage, focus and motivate programme team
• Manage programme change control
• Presentation of technical status to programme customers / partners
• To own the quality and integrity of the programme data
• Coordinate supporting research and technology tasks for programmes
• Implement EC automotive product development strategy
• Contribute to product roadmap definition
  
  Qualifications Minimum first degree or higher in Science or Engineering Qualified Programme Manager preferred Experience
• Automotive technical programme management preferably with an OEM or Tier 1 supplier
• Organisational leadership of multi-disciplined engineering led and operationally supported programme teams
• Building and maintaining programme customer / partner relationships
• Management of technical personnel
• Understanding of fuel cell basic principles
• Appreciation of engineering drawings
• Understanding of PandI drawings for fluid / mechanical systems
• Presentation of design solutions using renderings / sketches
• Applied knowledge of manufacturing processes for prototyping and concept development
• Knowledge of quality management systems / document control
• Evidence of effective management of publicly / commercially funded programmes
• Customer facing programme definition and technical scope negotiation
• Mentoring project personnel in order to provide training and programme CPD
  
  Personal Abilities
• Team player
• Methodical approach to work
• Approachable, Assertive and very motivated

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Design Engineer (Contract) - Catia v5 - Automotive Trim - Brackley - £25 - 33 per hour (PBU-103135)

Apply now

Design Engineer (Contract) - Catia v5 - Automotive Trim
Brackley, Northamptonshire, England
£25 - 33 per hour

Our client is a leading technical supplier to the automotive industry, and due to exceptional growth plans and current business requirements, they are looking to appoint a Design Engineer as such we welcome applicant who meet the criteria below: This role is Contract only, and were keen to hear from anyone available at short notice to support this requirment

Multiple roles available

Please apply if you meet the following:

Experienced Automotive Trim design (not BIW)
CATIA v5 experience
Available at short notice
Ideally, moulded or machined interior or exterior trim parts

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Application Engineer - Hertfordshire - Graduate Salary (RB-101797)

Apply now

Application Engineer
Hertfordshire, England
Graduate Salary

The World`s largest supplier of essential components and systems for automobiles, including air conditioners, fuel injection systems, alternators, meters and filters among others is looking to recruit a Sales Engineer based in the South East.
Your responsibilities will include:
Management of all Ford related systems necessary to successfully deliver the project (i.e. WERS, eFDVS etc.)
Leadership of on site customer projects and application engineering support.
Engineering specification fix for all applications, through negotiation agreement with the customer / DENSO headquarters / relevant design department at vendor.
Support of communication between customers, and company Headquarters and other related departments such as the QA Department..
Vehicle installation checks and system checks for quality control.
Measurement of engineering data. (i.e. vibration, temperature, etc ).
Hot and cold environment testing support for quality control.
Presentation to customers (of new products, or supplier competitions etc).
Research on new technology and competitors technology in Europe and feedback to DENSO headquarters.
Cost understanding and market price or target price research, and price negotiation.
Regular reporting to the Sales Manager / Assistant Manager about the status of project in which you are involved.
You must be degree qualified, preferably in Engineering or a related field and have experience of Engine Electrical or Powertrain technical sales, with evidence of Application engineering activity / success.
As this job involves frequent travel, you should have an interest in international relations.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

Manufacturing Engineer - 2623 - Stafford - £0 per year + �Competitive (LHI-99576)

Apply now

Manufacturing Engineer - 2623
Stafford, Staffordshire, England
£0 per year + ?Competitive

A recognised leading manufacturer of industrial diesel engines, where a position has become available for a hot test manufacturing engineer.
This role involves the application of sound technical Manufacturing Engineering skills in a project and process based environment, with responsibility for projects and production support.
The successful candidate will utilise experience and knowledge gained through exposure to hot test facilities.
Responsible for the continual improvement and maintenance of manufacturing processes and systems related to engine hot test. This process support and project role will apply lean Manufacturing tools and techniques to continually improve the hot test facility.
Provide subject matter technical expertise and leadership in the area of hot test.
Develop, evaluate and implement lean and innovative systems and solutions to meet the business objectives in the area of hot test.
Maintain and develop hot test process documentation, including standard work and PFMEA s.
Engage in and lead problem solving exercises utilising the 8D process
Support and engage in the development of on site quality initiatives, including MQ12005
Skills required:
Willingness to work a permanent, or rotating night shift pattern if required
Detailed knowledge of hot test control systems
Detailed knowledge of engine performance testing
Detailed knowledge of test cell calibration
Degree qualified in a relevant discipline or equivalent experience.
Experience in project management (Manufacturing biased)
Experience in technical report writing (Manufacturing biased)
Intermediate/advance knowledge and usage of MS Office packages
Desirable:
Knowledge of PLC s
Knowledge of torsional vibration

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.