Jonathan Lee Recruitment Automotive Jobs

Thursday, 12 July 2012

Calibration Project Leader - Gaydon - £29.80 - 29.80 per hour (106685)

Apply now

Calibration Project Leader
Gaydon, Warwickshire, England
£29.80 - 29.80 per hour

Calibration Project Leader.

Skills Required:
Technical Calibration First point of contact from M1 to MP1 Vehicle build and BIPO support co-ordination. FEU and press launch support co-ordination. Calibration issue resolution management. Technical support for calibration issues outside core calibration tasks. Work Planning and Co-ordination.

Experience Required:
Two years or more experience with automotive Power Train/EMS gasoline/diesel projects.

Education Required:
Ideally Degree Qualified or equivalent, in a relevant field or subject.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Contracts are those of an Employment Business.

Cold Start and Idle Calibration Engineer - Gaydon - £29.80 - 29.80 per hour (106684)

Apply now

Cold Start and Idle Calibration Engineer
Gaydon, Warwickshire, England
£29.80 - 29.80 per hour

Calibration Engineer - Cold Start and Idle

Skills Required:
Starting, Heat-up and Idle Calibration. Calibration of extreme Cold Start, including heater assisted. Calibration of glow plug temperature and durations. Calibration of stop-start. Calibration of soft shut off. Calibration of SCR catalyst heat-up mode. Calibration of SCR catalyst temperature hold mode. Calibration of Gas Conditioning coordinator. Calibration of Idle speed setpoint for all operating modes. Supervision of Idle Governor calibration. Interface with electrical load teams (Alternator, Urea tank, AirCon, ARC).

Experience Required:
Two years or more experience with automotive Power Train/EMS gasoline/diesel projects.

Experience Preferred:
Understanding of diesel after-treatment.

Education Required:
Ideally Degree Qualified or equivalent, in a relevant field or subject.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

ZF Transmission Calibration Engineer - Solihull - £19 per hour (105863)

Apply now

ZF Transmission Calibration Engineer
Solihull, West Midlands, England
£19 per hour

To provide support for ZF transmission calibration team of 18 based at Whitley. Types of duties to be performed: scheduling car repairs/reworks, diagnosing trans faults, re-flashing other fleet cars, organising sign-off drive events, providing logistical support when transporting cars /parts/people.

Skills Required:
INCA experience required. Must be able to manage own time and plan ahead. Knowledge of Automotive electrical systems preferred. Must be a confident communicator, verbal and written at all levels. Excellent communication skills. Good PC skills, including Microsoft Office.

Experience Required:
Must be familiar with automotive test environment and manufacturing environment.

Experience Preferred:
Experience of working in an engineering environment. Technical understanding of the Powertrain and Transmission systems would be useful.

Education Required:
Educated to A level or equivalent, in a relevant field or subject, is a minimum requirement.

Additional Information:
To provide Launch support at Castle Bromwich and Solihull, with visits to base team at Whitley. Successful candidates will need to have a full UK Driving licence and meet medical requirements of OEM facilities.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Track Engineer - Vehicle Safety - Berkshire (888337)

Apply now

Track Engineer - Vehicle Safety
Berkshire, England

Our client provides a unique range of products and services to the insurance and motor repair industries. Primarily, conducting research and product data. This data assists in the efficient, safe and cost effective repair of motor vehicles. Working closely with vehicle manufacturers to influence the design of new vehicles, their aim is to improve safety and security.

They are now looking for a Track Engineer - Crash & Safety to understand, define and develop vehicle safety test procedures - liaising with international VM, tier one suppliers and research organisations along with authoring, undertaking and refining tests and protocols and updating test methodologies using new research data.

As the Track Engineer you will have:

Fundamental understanding of vehicle dynamics, stability systems and collision avoidance.

Fundamental understanding of vehicle safety test procedures

Vehicle test preparation

Instrumentation and data acquisition

Operation of driver control systems

Team coordination and direction

Data analysis and interpretation using dedicated vehicles dynamics software

Knowledge and adherence to Health and Safety procedures – authoring Risk Assessments

Briefing management on test results

Authoring test procedures and research documents

Dissemination of test results to external parties

Authoring Peer reviewable technical scientific material

As the Track Engineer you will hold a relevant degree in engineering ideally with an understanding of automotive engineering, vehicle safety knowledge and vehicle dynamics and chassis engineering.

Cost and Commercial Analyst - Derbyshire - Negotiable on experience (888735)

Apply now

Cost and Commercial Analyst
East Midlands with national travel
Negotiable on experience

My client is one of the worlds largest utilities, focused on delivering energy safely, reliably and efficiently. They are currently looking to recruit on a contract basis 5 Cost and Commercial Analysts to be based at their office in the East Midlands. With previous experience as a Quantity Surveyor or Contract Manager within the electrical networks, utilities or construction sector you will have a working knowledge of NEC and FIDIC contracts.

Ideally you will have experience of dealing with overhead lines and electricity distribution but candidates with a QS background and strong urge looking to expand their skills will also be considered. You will need to have worked on NEC Option C contracts as a minimum requirement.

You will need to have strong commercial acumen and supply chain management with first class communication, negotiating and influencing skills. You should be able to build working relationships quickly across all levels of the organisation.

This is initially a six month contract with a very strong possibility of long term extension. The role involves travel on a national basis but will be based for the majority of the time from the office near the East Midlands Airport. Pay rate for the role is dependent on experience but is very competitive in the current marketplace.

Design Engineer - Oxfordshire (888730)

Apply now

Design Engineer
Oxfordshire, England

An outstanding opportunity to join one of the world's most iconic brands within motorsport on a contract basis.
They are now looking for a Design Engineer to work for an initial 6 month period to assist in the motorsport activities in a mechanical design and installation role.

As the Design Engineer you will be involved in:

-Component design using 3D CAD software
-Completion and release of engineering drawings
-Design and development of rig and test equipment
-Fault resolution
-Data transfer to customers
-Management of customer build specifications
-Management of CAD assemblies structures

The successful Design Engineer must have a relevant engineering degree or equivalent design experience in F1 or comparable formula along with proven experience of solid modelling and detail drafting essential and proven experience in transmissions or hydraulic systems design desirable.

Must have good communication skills and NX experience would be an advantage

Senior Account Manager - Gloucester (888160)

Apply now

Senior Account Manager
Gloucester, Cheltenham, Ross-on-Wye, Stroud

Senior Account Manager – Global Automotive

Gloucestershire, Permanent, Attractive Salary + Car + Benefits

Based at the Company’s UK manufacturing facilities in
Gloucestershire, an experienced Senior Account Manager is required to support
the Company’s aggressive and exciting strategy for global growth.

As Senior Account Manager, you will be responsible for driving an Account
Management strategy servicing a range of high profile, high value Key Accounts.
You will be the prime interface between the business and the customer, with
your primary focus being customer satisfaction and sales profitability growth
for the heavy duty business.

You will use your knowledge and experience of automotive
OEM's to manage all commercial aspects of the Customer account.

Candidates will have a technical / engineering background
within the Automotive Industry and a proven track record of key account
management with strong knowledge of high technology engineered products.

This is both an exciting and challenging opportunity for
an experienced Account Manager who seeks an opportunity within a progressive,
forward thinking global organisation.

The role will require both domestic and overseas travel and a flexible
approach.

Principle Electrical Engineer - Macclesfield - £35k - 40k per year (888734)

Apply now

Principle Electrical Engineer
Buxton, Macclesfield, Stockport, Sheffield
£35k - 40k per year

Client Information
My client a market leading design and manufacturing company with a global reputation require an experience senior Mechanical Design Engineer to join their team

Main Duties
The main responsibilities as the Electrical Engineering technical expert, are to support new and existing product development in line with customer requirements and also to provide support to the design, sales and technical teams throughout the full product lifecycle

Job description
- Design and commissioning of equipment
- Specification and selection of appropriate electrical components
- Providing technical support and issue resolution working with the client and project teams
- Assist with new product development, including building and testing of new products and software
- Provide technical leadership to the Electrical Engineering team
- Control the electrical estimated and actual costs
- Clarify any scope of supply issues with the project manager and agree timescales
- Establish direct lines of communication with the client as necessary to discuss/clarify control requirement and confirm any details in the specification.
- Produce control software for proprietary plc software packages as required for the project and also Variable Speed Drive software if required for the project
- Ensure all sub contract work is carried out to the required standards and regulations
- Ensure all project details are accurately entered onto the company document system including project drawings, software and testing documentation and sales quotations
- Ensure all Health and Safety objectives are met (specific standards include HSAWA 1974, LOLER 1998, PUWER 1998, CE Marking Directive 1998, and CDM Regs. 2007, Manual Handling Regs. 1992, etc. See quality procedures for complete list)
- Compiling Risk Assessments, Method Statements and Health and Safety Plan documentation and issuing to the relevant people

Key skills and experience
- The successful candidate should be qualified to degree level or equivalent in electrical engineering, or HND level
- Candidates should be proficient with electrical CAD systems, ideally E3
- Be used to working to Industrial Machine standards, i.e. BS EN 60204
- Familiar with Safety of Machinery, Safety Integrity Levels and Risk Assessments.
- Strong experience of electrical power and control systems
- Experience of electrical motor control using variable speed inverter drives
- Have experience of using switchgear
- Candidates should have experience of utilising spreadsheets and MathCad
- Be able to regularly visit client sites, occasionally abroad

Drive Train Design Engineer - 1611789 - Wolverhampton - up to £35.00/hr Ltd Co. (887238)

Apply now

Drive Train Design Engineer - 1611789
Wolverhampton, West Midlands, England
up to £35.00/hr Ltd Co.

We are recruiting for an Drive Train Design Engineer on a 6-month contract based in Wolverhampton.

THE COMPANY

Turner Powertrain Systems is part of the UK Caterpillar Group located in Wolverhampton (West Midlands). They are a market leader in the design, development, manufacture, sales and support of off-highway transmissions for Backhoe Loaders, Telescopic Material Handlers and 4-9 tonne Site Dumpers.

THE ROLE

As Drive Train Design Engineer, you will be responsible for fully contributing to solving technical problems while growing your analytical skills and mastery of engineering concepts. Exercises independent judgment with minimal direction from supervisor.
The Small Drive train team has engineering responsibility for all for Advanced Components Systems Division (ACSD) small transmissions. To support their needs to increase their responsiveness to OEM customers, accelerate the business cost reduction plans and develop solutions to resolve current product design issues.

Responsibilities of the role include:
Development, integration and validation of design changes supporting current production transmissions.
Ensuring, timely, response to resolve field issues and address manufacturing concerns.
This will involve developing concepts to meet critical customer requirements, effective CPPD with various suppliers to ensure an optimised design is developed.
The role will include release and implementation of drawings through the appropriate Engineering release systems.
Pro/Engineer experience required with 3 years of drive train or driveline systems design experience.

THE PERSON

Education/Experience:
Mechanical Engineering Degree.
Off-highway machine experience, desirable.
Experience of driveline development, design, installation and validation
Excellent Pro-E skills.
In depth knowledge engineering to release processes.
Certified 6Sigma Green Belt, desirable.
Ability to self-direct but also work effectively in a diverse team environment.

Senior Mechanical Design Engineer - Macclesfield - £35k - 40k per year (888731)

Apply now

Senior Mechanical Design Engineer
Macclesfield, Sheffield, Buxton, Stockport
£35k - 40k per year

Client Information
My client a market leading design and manufacturing company with a global reputation require an experience senior Mechanical Design Engineer to join their team

Main Duties
The main responsibilities of the post holder included producing and planning daily work schedules, allocate staff and resources and supervise their activities for the design team to ensure projects run to schedule

Job description
- Effective designs of Crane and hoist components and structures
- Technical specifications for materials and components in line with customer specification
- Stress analysis / Dynamic analysis of new components
- Approving designs and creating manufacturing plans
- Design and maintain computer design software/programmes in Excel
- Overall responsibility for company technical procedures and standards
- Interpret client specifications from sales or contract stages, including high levels of client liaison
- Commissioning, troubleshooting and problem solving
- Prepare cost effective proposals for quotation purposes

Key skills and experience
- Design role in similar materials handling environment, working on all areas including concept and detail designs
- Mechanical/Structural Engineering/Applied Maths degree or equivalent industry experience
- Experienced 3D solid modeller, ideally with solidworks or pro engineer experience
- Experienced in Finite Element Analysis (FEA)
- A good understanding of electrical principles and manufacturing processes, particularly steel fabrications, structures and mechanical power transmission equipment
- Experience of working to engineering standards and international codes of practice

HR Advisor - Oxfordshire (887901)

Apply now

HR Advisor
Oxfordshire, England

To effectively and efficiently support and carry out recruitment activities across the UK, in line with business requirements.

To provide a timely and well organised process driven service, ensuring positions are filled in time, with suitable candidates.

To utilise recruitment systems to manage recruitment processes efficiently and effectively.

To support the effective and efficient running of the Recruitment and Staffing function.

The role will be expected to cover permanent, student and post graduate recruitment activity.

Raising purchase orders, cross charging invoices, booking interviews, contacting candidates and producing monthly reports.

The candidate must have excellent admin skills, PC skills (Excel, powerpoint etc)
Strong administration skills are essential

Steering Wheel and Tyres Project Leader - Warwickshire (888641)

Apply now

Steering Wheel and Tyres Project Leader
Warwickshire, England

Our client is a leading independent provider of product engineering, research, testing information and certification to the worldwide automotive industry and is based in Warwickshire.

They are currently seeking to recruit a Steering Wheel and Tyres Project Leader on an ongoing contract basis to support clients by leading and contributing to the timely delivery of a range of exciting new models.

The Project Leader / Management role in the area of SWandT is of significant importance in the programme as it is responsible for the delivery of key customer requirements.

Currently we are at Concept / Prototype Stage in the development of SWandT system and therefore, many components / systems are still very fluid and various ideas are being considered in an attempt to secure PS - Project Start.

The candidate will work at the whole vehicle level to develop attribute performance in conjunction with relevant component owners.

As a principle leader the successful candidate will need to work very prescriptively within various processes and protocols of the client company whilst drawing upon and utilising their own engineering skills in order to make this a success.

Working with the Vehicle Engineering Manager and his Team you will be responsible for the Concept Development and delivery of the vehicle attributes to support our client's requirements. The specific identified tasks are:

* Targets setting and cascade
* DVP creation and monitoring and FDVS inputs
* AIMS Champion/update - support of AIMS reviews
* Chair Project / Status review meetings
* Manage all attribute issues and resolution routes
* Track key actions and expedite delivery
* VIT meeting attendance
* ESO tracker updates
* Panel chart creation and maintenance
* Write and have approved gateway and ESO reports
* Key interface during the launch phases alongside the Launch Team

ESSENTIAL REQUIREMENTS:

* Manufacturing processes, demands and protocols.
* Build planning (and some project planning knowledge).
* Working knowledge of GPDS, i3, LQOS, WERs, AIMs, Concerns, QZ, PPAP, eFDVS, integrator.
* Global 8D, six sigma methodologies, A3/A4 protocols
* Traumas, tribulations and success that comes with launching new products.
* Working knowledge of the test and development process associated with the attribute.
* Working knowledge of OEM and automotive development requirements.
* Good standard of education and learning relevant to the role ideally at degree level.

DESIRABLE

* Can demonstrate that they have delivered or made a significant contribution to the successful implementation of a project.
* Work or supported a launch environment in either manufacturing or engineering
* Undertaken test and development role on passenger cars associated with the attribute
* Can demonstrate the successful delivery (driver rather than passage) of programmes/ activities by taking ownership of all appropriate tasks.
* Worked and operated within an engineering and/or manufacturing environment within either the automotive or aerospace activities.
* Has a working knowledge of project planning from concept development through to launch and appreciates the key issues associated with successful delivery.
* Confident to support all management drives.
* Can demonstrate a flexible approach to the way they work.
* Experienced at dealing with conflict whilst remaining delivery focused.
* Used to working within a highly productive team.
* Used to working with limited supervision

Structural Analyst (FE) - Leicester (888285)

Apply now

Structural Analyst (FE)
Leicester, Leicestershire, England

Structural Analyst (FE) - Automotive

Our client a world class solutions provider to some of the automotive industries leading suppliers and OEM's is currently looking to strengthen their analysis department with the introdution of a Structural Analysist to support current NVH and Vehcile Dynamic programmes. As a key member of the team you will be required to support and cover the following:

Job Role:

Undertake modelling and analysis activities using FE methods to support component and vehicle design and development

Key Functions:

Build, analyse and correlate FE models, including design refinement and optimisation
Undertake modal and durability assessment of a variety of structures, principally automotive
Support FE contribution to vehicle design and development programmes
Support ad-hoc analysis requests in support of design and vehicle dynamics/NVH colleagues

Qualifications & Training

BSc or BEng or equivalent, in relevant subject
Experience or training in FE tools including MSC.Nastran or ABAQUS, Altair/HyperWorks (especially Optistruct and HyperMesh)
Experience of MSC.Patran, MSC.Fatigue or DesignLife

Desired Experience:

Use of MSC.Nastran or ABAQUS (stress, modal and vibration options) and associated modelling tools.
Familiarity with automotive structures at component and vehicle level
Significant experience of fatigue assessment using FE models
Knowledge of design optimisation tools (Optistruct)
Knowledge of MSC.Fatigue or DesignLife
Use of (or interaction with) ADAMS analysis tools

Electrical Control Project Engineer - Lancashire - rate negotiable on experience (888429)

Apply now

Electrical Control Project Engineer
Lancashire
rate negotiable on experience

My client is a leading food manufacturer in the North West. They are looking to recruit an Electrical Control Project Engineer to be based on a key site providing installation, maintenance and trouble shooting solutions to high speed packing lines and processes.

With a strong electrical background and some multi-skilled experience you will be qualified ideally to HNC level but as a minimum to 17th edition level. You will need to have Siemens PLC, control and automation experience within an FMCG environment.

With a hands on approach and project management experience you will be highly motivated and committed to delivering high quality works. Experience of using Microsoft software packages is desired including MS Office and MS Project.

This is a contract role for an initial 6 month period. The rate for the role is negotiable on experience and interested candidates should submit their details immediately.

Programme Manager - Northamptonshire - £350 - 400 per day (888710)

Apply now

Programme Manager
Northamptonshire, England
£350 - 400 per day

Our client is a precision low volume high performance vehicle manufacturer. They are currently seeking to recruit a Programme Manager initially on a contract basis with a view to the role becoming permanent in the future.

The position itself is mainly working and leading on a KERS project. A lot of the programmes are driven by a launch however this is mainly delivering the programme and making sure the processes is followed in line with timescales.

Although the position is working the core hours there may be occasions that due to the nature of the business trackside support via the telephone would be required.

GENERAL DUTIES:

* Programme setup and launch, create and control scope document with cross-functional buy-in and sign-off
* Manage and lead a formal disciplined gateway review process
* Drive alignment of all key stakeholders across the value chain
* Identify and mitigate risks and barriers to progress
* Facilitate achievement of Engineering objectives, be creative to maximise the rate of learning
* Track and report on status vs. key plan dates and technical targets
* Process ECNs ensuring the requirements are clearly communicated and aligned with the Programme needs

Idea to Stores Phase:

* Detailed project planning and implementation of this plan
* Identify resource required to achieve Programme targets and drive the relevant functions to provide this resource
* Lead Supplier Design Agreements to engage the supplier early in the design process and minimise time from idea to stores
* Ensure Supply Chain, Build and Test alignment to maximise the rate of learning
* Provide direction and insight for Materials Planners to ensure clear communication of requirements and priorities to the Supply Chain
* Work closely with the Supply Chain to expedite delivery where necessary to achieve Programme objectives

Specification to Strip Phase:

* Maintain and release Top Level Plan to provide "big picture" volume requirements
* Ensure Stores, Build and Test alignment with Programme requirements
* Release test requests, adding to dev. spec activity as required
* Provide direction and insight for Hardware Coordinators to ensure clear communication of requirements and priorities to Stores, Build and Test
* Work closely with the Trackside teams to ensure timely provision of information and hardware

ESSENTIAL REQUIREMENTS:

* Engineering or Science based Degree (minimum 2:1) and/or sufficient experience in a relevant industry to have a wealth of knowledge to draw upon when managing fast paced, Engineering-led Programmes
* Experience of SAP and Microsoft Project
* Attention to detail and creative problem solving skills are essential
* Ability to lead a project and be responsive
* Professional, positive attitude with excellent written and oral communication skills
* Able to motivate teams in highly pressurised situations
* Tenacious, ambitious and creative with a very good attention to detail
* Capability to work both tactically and strategically as required by the Programme needs
* Self-motivated with excellent time management
* Ability to manage complex scenarios in a constantly changing environment with deadlines that do not move

DESIRABLE ATTRIBUTES:

* Post graduate qualifications relating to the demonstration of professional development such as CEng or MBA
* Beneficial to have some trackside experience, a small degree of engineering knowledge as well as supply chain knowledge

Wednesday, 11 July 2012

Design Engineer - Sheffield - £26k - 32k per year (888724)

Apply now

Design Engineer
Sheffield, Rotherham, Doncaster, Barnsley, Chesterfield
£26k - 32k per year

Client Information
My client a market leading mechanical handling company. They offer a full range of bespoke Mechanical Handling solutions for a variety of industry sectors. The company also offer a range of supporting service including, servicing and Electrical Control Systems

Job description
-Working within the Projects Team working on a number of bespoke mechanical handling projects across a variety of industry sectors, including Nuclear and Power Generation.
-Will be involved in projects from initial meetings with client through to delivery
-Fully conversant with Solidworks or Pro Engineer.
-Produce clear and accurate designs in line with project specification.
-Will be producing calculations for structural work and motors.
-Working closely with both Sales and Projects team
-Produce parts lists and relevant supplier technical documentation and quotations
-Candidates should have experience of working with MathCad software
-Ensure all documentation and correspondence relevant to the project design is up to date and stored within company standards.
-Responsible for quality control of design of process
-Compile technical folder to comply with CE and CDM requirements
-Work within the Health and Safety regulations and comply with CE and CDM

Key skills and experience
-Candidates should ideally be educated to degree level or equivalent in Mechanical Engineering or related subject
- Previous experience and strong working knowledge of Solid Works or Pro Engineer (preferably) or other 3D modelling software
-Experience of working with CDM regulations
-Experience of designing heavy duty materials handling equipment
-Previous experience within the Nuclear industry preferred
-Candidates should have experience of putting together bills of materials

CAD Engineer - Solidworks - Gillingham (888461)

Apply now

CAD Engineer - Solidworks
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a CAD Engineer for an initial 6 month contract to produce Solidworks models / detailed drawings for components used in next generation common rail [CR] pumps and injectors. This includes both 'clean sheet' solutions as well as the re-use of features from existing designs.
The successful CAD Engineer will report to a Principal Design Engineer / ADP Pump Engineering Manager.
Responsibilities include but are not limited to:
Detailing and checking of component drawings for current and future applications of fuel pumps/injectors for the automotive market.
Assure GDandT and other drafting standards are applied to new component drawings.
Assist the Principal Design Engineer with design changes that assure the programme meets cost, Design for Manufacture, performance and timing goals.
Assist the flawless Launch for all new product programmes.
Facilitate fast and accurate two-way communication with development, purchasing and process engineers to assure robust design and flawless launch objectives.
Ability be able to produce and present technical presentations at design reviews is desirable.
The CAD Engineer will hold a minimum HNC in mechanical engineering or equivalent with proven experience in design draughting in a production-type environment with good knowledge of GDandT and other drafting standards.
Must have experience of Solidworks (or similar) modelling and draughting experience along with basic physics.

Quality Engineer-Automotive 1st Tier Supplier - Coventry (888707)

Apply now

Quality Engineer-Automotive 1st Tier Supplier
Coventry, West Midlands

We are working with a very specialist 1st tier automotive supplier who are very well established providing products into a major OEM. They have 2 sites in the Midlands and have targeted the second half of 2012 for a massive increase in production, they are making some 1100 units a week come August.

They are looking to bolster their team with a competent and experienced automotive Quality Engineer. You do not need to be management level but a team-player who has worked to both TS16949 and ISO 9001 standards, again you won't be implementing these systems, merely adhering to them and offering your own lean/continual improvement advice. The role will be in a very fast paced environment so you must be organised, friendly and personable.

You must have proven experience of quality methodology/techniques such as 5S, 5Y, 8D, Kaizen, Kanban (amongst others) in an automotive environment.

It's an immediate start with a good market salary in an established 1st Tier supplier.

Project Engineer - Automotive - Wellingborough - £30k - 36k per year (888019)

Apply now

Project Engineer - Automotive
Wellingborough, Northamptonshire, England
£30k - 36k per year

Our clients is a small fabrication engineering company who are looking at expanding with adding to their team with an experience Project Engineer, if you feel you have the requiremnts below and can demonstate stability and progression to join this expanding company, please apply below

Experience Required:
Experience of Automotive Project Engineering
Experience of working within Industry Systems i.e. TS16949,ISO14001,ISO9001
Strong history of New Product Introduction and Understanding of Project Process Flow
Good Commercial Acumen and ability to work within Project Budgets
Understanding of APQP and PPAP requirements

Excellent communication and interpersonal skills
Strong prioritisation skills and ability to manage own workload
Ability to make decisions and use own initiative, with the ability to work independently from direct supervision

Basic Catia V5 knowledge, Manipulation/Basic design
Automotive sector experience Tier 1/Tier 2, Minimum 3 years
HNC minimum - Engineering disciplinary, Mechanical /Electrical or Production

Cost Estimator / Cost Engineer - Warwickshire - + contract £26.32 per hour (SMIC-102672)

Apply now

Cost Estimator / Cost Engineer
Warwickshire, England
+ contract £26.32 per hour

Our automotive client is a market leader in luxury and high volume off-road vehicles, designing and manufacturing in the Midlands. Working in a team with a global focus, you will develop valuable knowledge of automotive parts and processes.

As a Cost Estimator or Cost Engineer, you’ll focus on a specific vehicle commodity - from Exterior to Interior, through Power Train, Chassis, and Electrical. You’ll be responsible for:

• Delivering ‘should cost’ estimates for a specific sub-set of parts.
• Supporting the Purchase team in their negotiations with suppliers.
• Working closely with Design Engineers as a business advisor.
• Identifying and supporting the implementation of opportunities to reduce costs.
• Influencing relevant programmes and commodity directions.
• Supporting cross-functional, cross-brand and supplier charge outs.

If you already have relevant professional experience, you could join us as a Cost Engineering Manager, or in another senior or project-based role. Providing more than hands-on technical support, you’ll be accountable for:

• Leading or supervising teams.
• Acting as a senior business analyst.
• Actively leading technical negotiations with suppliers.

To join us at any level, you’ll need to demonstrate a range of relevant manufacturing process knowledge. It’s essential that you have technical awareness at both the production process and cost driver level. Willingness to travel is essential. Ideally, you’ll also have some experience of project management.

You’ll need a degree / professional qualification or an equivalent level of experience. Excellent communication skills are vital, together with a proven ability to think on your feet and make appropriate decisions.

In return, you’ll benefit from our commitment to your ongoing development, with opportunities to further your career in a world-class Finance team through roles across the breadth of our business

Automation Assembly Engineer - Cannock (887016)

Apply now

Automation Assembly Engineer
Cannock, Staffordshire, England

Automation Assembly Engineer

Exciting Advanced Technolgy Projects - Automated Assembly

Description

Our client is a leading automotive first tier supplier with ambitious growth
plans. Operating from a number of sites across the UK they manufacture a range
of complex pressings, assemblies and stampings to a prestigious portfolio of
OEMs in the UK and Europe.

Due to a significant programme of investment to support new business they are
now looking to recruit a talented and technically competent Assembly Engineer.

Job Requirements

Working as part of the assembly engineering team the post will report to the
Assembly Engineering Manager. This team operates within a matrix structure as
part of the Group Engineering function, which means at any one time you could
be working on a wide variety of projects, with a specific remit for the
successful integration of advanced automated assembly equipment. This could
range from discreet robotic assembly and welding cells to complete fully
automated assembly lines.

As part of this challenging role you will be responsible for preparing detailed
equipment specification, RFQ's and conducting equipment tender evaluation. The
role will require an element of travel to both operating sites and equipment
suppliers, both in the UK and abroad.

An understanding of process FMEA's and Lean Manufacturing principles will be
required together with an ability to problem solve at both plant and equipment
level.

Details

To be considered for this role you must have experience of working within a
fast paced assembly environment with significant experience of introducing
advanced technology capital equipment projects.

Qualifications for the role will be either apprentice trained and qualified to
HNC level, or degree qualified with real hands on experience of successful
equipment specification, evaluation, sign off and installation.

This is an excellent opportunity to join a dynamic team at a period of
expansion and the chance to work on some very exciting engineering projects.

Tuesday, 10 July 2012

Quality Engineer - Rotherham - £26k - 29k per year (888430)

Apply now

Quality Engineer
Sheffield, Rotherham, Barnsley, Doncaster
£26k - 29k per year

Client Information
Our Yorkshire-based client is a global Tier 2 designer and manufacturer of advanced electronic and electromechanical products for the automotive industry including control units, sensors, monitors and motors

Main Duties
The main responsibilities of the role are to drive quality improvements from within the company. Using systematic identification and elimination of both, process defects and variation using problem solving and statistical analysis techniques. To support the production organisation in achieving right first time every time delivery performance

Job description
-Support the customer liaison function in analysing all customer returns. Use standardised problem solving methods to reach a PCA within the defined time period.
-Identify through a process of systematic working any concerns within the production area that are preventing key objectives been achieved, use standardised 8D approach to contain, and close any concerns found.
-Using a systematic approach drive to permanent resolution any concerns affecting scrap from within the manufacturing area
-Predominantly plans and monitors activity on a scale of weekly, monthly and yearly.
-Expected to make recommendations to management regarding component quality or to eliminate problems.
-Support all internal continuous improvement projects
-Will be responsible for decision making in the absence of supervisors, when system, component or product quality does not meet with company or customer standards.
-Responsible for maintaining all financial outgoings in line with agreed departmental budgets.
-Give advice and technical support to production supervision, technical services and customer on all aspects relating to component manufacture and process quality, so strong internal and external communication required with the role.

Key skills and experience
-Candidates should be HND / Degree qualified in Electronic or Mechanical Engineering.
-Knowledge and experience in Quality tools, MSA, SPC, FMEA, Statistics
-Previous experience of the Automotive manufacturing sector would be preferred
-Strong understanding of Lean Six Sigma and other continuous improvement techniques.
-Strong IT skills.
-Good Analytical and practical problem solving ability

Quality Manager - Sheffield - £32k - 36k per year + pension + bonus (888211)

Apply now

Quality Manager
Sheffield, South Yorkshire, England
£32k - 36k per year + pension + bonus

Main Duties
The postholder will be covering all aspects of Quality within the organisation to ensure the companys' AS9100 accreditation is maintained. The Quality Manager will be expected to raise the profile of Quality and develop a culture of Quality within the business

Job description
-Ensure that all aspects of the companies Quality System continue to meet the requirements of AS9100 Rev C when audited by customers and third parties.
-Responsible for all Quality documentation being current, updated in a timely manner to reflect any changes to the system and ensure employees are aware of these changes.
-Ensure all employees are aware of the QP's and SOP's relevant to them, so that they fully understand their responsibilities and the importance of adherence to these procedures.
-Ensure annual Quality audit schedules are developed, adhered to and all audits are closed out in a timely manner.
-The calibration schedule is maintained
-Collect accurate quality costs and analysis of this information to identify areas for improvement
-Liaison with customers and suppliers as required as part of the resolution of Quality issues
-Ensure accurate Quality information is submitted in a timely manner to the Technical Manager for inclusion in the Technical Services Monthly Report.
&bullet; Will be responsible for resolving non conformances, identifying the root cause and implementing corrective actions

Key skills and experience
-Candidates should have experience in metals industry - forging, rolling, heat treatment, stockholding, ideally with nickel based alloys
-Must currently be a Quality Engineer with experience of working to and maintaining a company's AS9100 accreditation and experience of ISO9001 systems
-Experience in carrying out internal and external audits and hosting 3rd party audits
-Will be working to Rolls Royce or other aerospace OEM's Quality requirements
-Candidates would have experience of working to Oil and Gas specifications, or from the Aerospace or Automotive sectors
-Previous experience of writing procedures and training personnel

Metallurgist - Sheffield - £28k - 35k per year (888109)

Apply now

Metallurgist
Sheffield, South Yorkshire, England
£28k - 35k per year

Client Information
My client a leading manufacturing company based in Sheffield. The company supplies precision components and assemblies to the aerospace, power generation, speciality automotive and oil and gas industries

Main Duties
Due to sustained growth my client are looking for an experienced Process Metallurgist to join their technical team. The post holder will be working with the Production and Quality teams to maximise efficiencies within the manufacturing process

Job description
-Prepare detailed technical reports
-Manage, monitor and advise on manufacturing process, ideally from a hot metal conversion background
-Design and prepare production routes to maximise efficiencies
-Enquiry and contract review to determine manufacturing processes and capabilities
-Work with production team to maximise efficiencies within the manufacturing process
-Prepare methods of manufacture
-Customer liaison to resolve any issues
-Investigation of non-conformances
-Assist customers with external audits of the company

Key skills and experience
-Candidate should be educated to degree level in Metallurgy or Materials Science or related discipline however relevant work experience also acceptable
-Understanding of quality procedures in a manufacturing environment
-Candidates should have experience working in a Metal Manufacturing environment and have worked with a variety of metals, including Steel and Nickel Alloys
-Understanding of inspection procedures, and quality procedures
-Be able to work as part of a team and also lead teams on technical projects

Sales Engineer - Rotherham - £30k - 35k per year + package (887956)

Apply now

Sales Engineer
Rotherham, South Yorkshire, England
£30k - 35k per year + package

Client Information
My client a leading manufacturing company specialising in machined components to a wide range of metal manufacturing companies across a variety of engineering sectors, including Oil and Gas, Power Generation and Aerospace.

Job description
-Applicants should have a proven track record in the generation, development and finalisation of sales leads and possess a good understanding of machining processes, CNC machine tool technology and commercial issues.
-Forge key relationships with existing clients and develop new business opportunities increasing customer awareness, sales and technical support
-Capture new business in strategically agreed market sectors.
-Manage the preparation of successful high-value proposals and estimates for customers
-Develop relationships with decision-makers in customer and target organisations ensuring strong partnerships are achieved
-Be able to communicate to all levels including board level as well as detailing product specifications

Key skills and experience

-Candidates should be comfortable reading Engineering drawings and will have a Mechanical Engineering qualification or will have served a technical apprenticeship.
-Should have experience in CNC machining or programming across a variety of industry sectors
-Experience of Technical Sales, creating technical solutions to a customers

Applications Engineer / Technical Support Engineer - Durham - £32k - 40k per year + benefits (887562)

Apply now

Applications Engineer / Technical Support Engineer
Durham, County Durham, England
£32k - 40k per year + benefits

My client a specialised in flow measurement, established for over 30 years developing expertise in flow measurement for the oil and gas industry. Require an experienced Applications Engineer / Technical Support Engineer to join their established team

REQUIREMENTS:
Evaluation/interpretation of customer data /requirements
Developing effective solutions based on customer needs
Generating bid proposals from conceptual studies through to formal tenders
Order conversion either with customers or in conjunction with regional sales managers
Contract review process
Knowledge of Contract terms and conditions, contract negotiation
Commercial knowledge i.e costing, margins
Experience in the generation of detail technical proposals process preferably within the Oil and Gas

VAC REQ :
Recognised Engineering qualification -- ideally educated to degree level in an Engineering Degree or relevant experience will be considered
Technical experience in a related role/field
Knowledge and ability to interpret detailed technical specifications
Ability to work in a team environment, including close liaison with sales engineers, product managers and Sales Managers

Pre Production Engineer - Rotherham - 25K to 32K (105266)

Apply now

Pre Production Engineer
Rotherham, South Yorkshire, England
25K to 32K

Our Yorkshire-based client is a global designer and manufacturer of advanced electronic and electromechanical (mechatronic) products for the automotive industry.

Primary focus of the role
Development and integration of new production lines and technologies from product concept through to end of product life, within time and budget controls. Also to ensure component design and assembly concepts are compatible, whilst ensuring feasibility of design for manufacture.
VAC REQ :Key skills and experience
-Candidates should be educated to degree level in an Engineering discipline or relevant experience
-Previous experience within new product introduction process in a manufacturing environment
-Ideally candidates should have knowledge and experience in APQP, PPAP and FMEA techniques
-Experience of working on multi disciplined (mechanical / electrical) projects

Job description
-Will be responsible for ensuring the product design is thoroughly reviewed, with regard to manufacturing feasibility, cost efficiency and quality
- Manage Production requirements for the introduction of new products through the Product Launch Readiness system and in particular PPAP and problem solving at an early stage of the project
-Ensure compliance with all TS 16949 and ISO 14001 requirements
-Components will be of high complexity and low volume aimed at high end luxury products
-Ensure adherence to key project need dates, and agreed departmental timing plans.
-The post holder will help influence capital expenditure of c£1,000,000 pa, and working on multiple projects at a time
-Responsible for project spend against agreed targets with respect to jigs and fixtures, test equipment and capital investment
-Ensure all 8D and problem reports activities are completed within specified time scales.
-Support APQP function with Quality Planning documentation and ensure production lines are released in a robust manner
-Provide management information in report format on time as requested
DESCRIPTION: Our Yorkshire-based client is a global designer and manufacturer of advanced electronic and electromechanical (mechatronic) products for the automotive industry.

Primary focus of the role
Development and integration of new production lines and technologies from product concept through to end of product life, within time and budget controls. Also to ensure component design and assembly concepts are compatible, whilst ensuring feasibility of design for manufacture.
VAC REQ :Key skills and experience
-Candidates should be educated to degree level in an Engineering discipline or relevant experience
-Previous experience within new product introduction process in a manufacturing environment
-Ideally candidates should have knowledge and experience in APQP, PPAP and FMEA techniques
-Experience of working on multi disciplined (mechanical / electrical) projects

Motor Development Engineer - Warwickshire (888660)

Apply now

Motor Development Engineer
Warwickshire, England

Controlled Power Technologies is a newly formed company that has acquired the rights to a portfolio of advanced technologies. Their expanding team is focused on delivering CO2 reduction technologies to the Automotive Industry. They are seeking a Motor Development Engineer to join our team delivering CO2 reducing technologies. Principal responsibilities will be to develop and validate motor control and application software for Switched Reluctance motors integrated in their technologies for a number of automotive applications.

Key responsibilities

- Motor control system development/testing.
- Define the operating range of Switched Reluctance motors
- Software testing
- Documentation

Skills/attributes

- Ability to understand 'C' code for embedded real-time systems
- Use of Matlab for system development
- Appreciation of low-level hardware issues
- Appreciation of control and power electronics
- Appreciation of serial communications protocols (CAN and LIN)
- Ability to work with limited supervision
- Self motivating and a flexible approach to working in small teams.

Qualifications/experience

- Degree level - Electrical/Electronic Engineering or equivalent
- Experience of Motor Control is preferred.
- Background in Electrical/Electronic Engineering
- Wider knowledge/interest in Automotive Systems and Engineering desirable
- Appreciation of Rotating Machines/Electric Motors would be desirable

BoM Analyst - Dunton Wayletts - £18.10 - 18.10 per hour (888699)

Apply now

BoM Analyst
Dunton Wayletts, Essex, England
£18.10 - 18.10 per hour

Bill of Materials Analyst.

Skills Required:
Support all prototype build events by issuing GPIRS orders, including any required amendments, in pursuit of 100% parts delivery at MRD. Provide scheduling and validation support as required for each program. Support additional build requirements by adding or deleting BoM attributes. Manage any special handling of parts e.g. re-works. Responsible for supplier follow-up including tracking transport details. Monitors Inactive Material reports and manages the scrapping process. Actions picks and issues build site documentation as necessary. Represents their commodity/Vehicle Line and provides appropriate administration to support Shortage Meetings. Chases material and maintains status reporting in the CMMS environment for Program Pre-Builds where PPM have SCM responsibilities Participates in GPIRS validation actions with affected PMT"s and ensures that the resulting BoM revisions are reflected in their subsequent ordering and following up documentation Participates in events with Ford representatives and third parties such as suppliers when promise dates are either not forthcoming or unacceptable. Supports PPM scorecard SQDCME objectives.

Skills Preferred:
Proficiency in GPIRS/WERS/CMMS3. Good grounding in GPDS principles. Good interpersonal/communication skills. Periods of travel and being away from home will be required.

Experience Required:
Proven experience in material control or supply chain.

Education Required:
Educated to A level standard.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Monday, 9 July 2012

Electronics Test Technician - Basildon (888512)

Apply now

Electronics Test Technician
Basildon, Essex, England

As part of its strategy of developing solutions to reduce CO2 emissions Valeo has recently acquired the Electric Supercharger business of a British automotive technology development company.
With this move, Valeo becomes the first automotive supplier to offer its customers a range of electric superchargers. Unlike exhaust-driven turbochargers, electric superchargers are driven by an electric motor. They now require an experienced Electronics Test Technician, as part of the R and D Department, with a demonstrable ability in the following:
Key responsibilities:
Design, assembly and test of prototype PCBs, wiring looms and test equipment
Build, preparation and instrumentation of Units Under Test
Troubleshoot electronic systems and PCBs down to component level
Investigate failures of electronic components/systems to identify design/manufacturing issues
Assist with electrical integration of hardware and test equipment into prototype vehicles
Support the preparation and execution of Product Design Verification (DV) testing
Support the preparation and execution of vehicle-based DV testing
Daily checks and maintenance of test logs during DV testing
Support Test Engineer in preparation of DV test reports
Calibration of various test equipment
As the Electronics Test Technician you will be responsible for:
Sound working knowledge of PCB design, assembly and fault finding
Familiar with use of oscilloscopes, data loggers, signal generators, bench power supplies etc.
Basic mechanical assembly
Test rig and vehicle-level fault finding
Prior experience of structured product testing, preferably within the Automotive sector
Ability to prepare and present test results quickly and efficiently.
Self-motivation and ability to work unsupervised
Flexibility and discipline to manage multiple tasks and deadlines
Strong interpersonal skills and a flexible approach suitable to working within a small team
Hands-on, practical approach to problem solving
Prior experience of working to defined standards and requirements (e.g. ISO 9001 ,TS 16949, ISO 14001) would be considered beneficial

Relevant experience - Automotive sector is preferred but not essential.
Recognised apprenticeship or equivalent academic qualifications (e.g. BTEC, ONC, HNC, HND
Experience of working to a structured product development methodology in the Automotive (or similar) sector would be ideal

Application Engineer - Basildon (888511)

Apply now

Application Engineer
Basildon, Essex, England

Project Engineer - fabrication - Wellingborough - £30k - 36k per year (888019)

Apply now

Project Engineer - fabrication
Wellingborough, Northamptonshire, England
£30k - 36k per year

Software Engineer - Test Systems (Labview) - Park Royal (887008)

Apply now

Software Engineer - Test Systems (Labview)
Park Royal, Greater London, England

A World leader in the field of advanced fuel injection systems to the car, truck and industrial sectors are now looking for a Software Engineer Test Systems (Labview).
The Software Engineer will support the development of test rig capabilities to meet the changing needs of the product development and validation engineers. This includes bug fixing, documentation, implementing new strategies, managing large code changes and training the users on new features as they are released

The successful candidate will ensure software evolution proceeds in accordance with ongoing requirements spec development.
Liaise with the product and validation groups, supporting test rig capability improvements.
Maintain source code and document software development.
Integrate new hardware into test systems.
Ensure adherence to quality control standards, QS900, ISO1400 and TS16949.

The Software Engineer will hold a degree in a relevant engineering discipline or equivalent ideally with expeirenc eof working within a mechanical engineering environment (development/validation) and be highly experienced in either:
LabView, (capable of programming components of test rig control applications) or Diesel Fuel injection systems.

You will be familiar with the use of various software applications Matlab, Labview etc with a genuine interest and enjoyment in engineering and resolving technical problems.

Experience within the following areas would be desirable:
CAN and Serial comms using NI hardware.
TCP / IP.
Instrumentation (types, hardware, procedures, calibration).
Data acquisition (NI equipment).
Closed loop process control systems.
Multi axis motor and drive systems.
Hydraulic equipment, circuits and instrumentation.
Basic electronics.
Data structures, databases, SQL.

Test Development Engineer - Park Royal (105712)

Apply now

Test Development Engineer
Park Royal, Greater London, England

A World Leader in the innovation, Design and Manufacture of Diesel Fuel Injection Equipment and are now looking for a Product and Test Development Engineer to work on either a permanent or contract basis.

Reporting to the Advanced Development Manager the product and test development engineer will primarily be required to develop test and analysis methods to aid characterization of advanced prototype products.
Providing technical competence in the following fields :-
Mechanical systems
Electrical / electronic systems
Rig control application
Instrumentation
Utilizing Labview to control, acquire and present test data in the most appropriate way to enable rapid development of prototype product.
Adapting test rig or product in order to allow experimental testing.
Identify and develop signal processing and analysis algorithms for test rig data.
Strong fundamental mechanical skills (fluid dynamics, mechanics).
Good understanding of HDB product development and analysis techniques.
Providing technical reports on delivered solutions
Diagnosing failing product to component level
Support component development engineers
Ensure adherence to quality control standards, QS900, ISO1400 and TS16949.
Contribute and participate in Total Quality activity to promote an environment of continuous improvement.

Qualified to degree level in an engineering discipline or equivalent. Ideally with work experience in a relevant engineering environment. A genuine interest and enjoyment in engineering and resolving technical problems. Able to demonstrate excellent presentation, communication and inter-personal skills. Strong learning skills.

Senior Design Engineer - Sheffield - £32k - 40k per year (888599)

Apply now

Senior Design Engineer
Sheffield, Rotherham, Doncaster, Barnsley, Chesterfield
£32k - 40k per year

Client Information
My client a leading manufacturing company within the mechanical handling and heavy engineering sector, based in South Yorkshire. The company are experiencing a continual growth over the last few years and have a very strong order book and customer base. My client based in Sheffield offer a full manufacturing service including design and development work on site through to final manufacture and installation.

Main Duties
The main duties of the role will focus on the design and development of a range of Mechanical Handling systems and Heavy Engineering project. The post holder will be responsible for working with the sales team to take projects through to delivery stage by working with internal and external teams to ensure customers' requirements are met in full and on time and within budget

Job description
- Develop and present technical solutions to the customers and in house teams on new or current projects.
- Design and development of new Products in line with customer specifications and in line with company procedures
- Produce thorough and accurate design project documentation to gain approval of customer and Design manager
- Implement design changes to improve manufacturing efficiency
- Produce accurate project documents including manufacturing methods, bills of materials and stress analysis
- Working with internal departments along with external customers and suppliers to ensure design meets customers' expectations and I ensure efficient production processes
- Provide technical support to sales and marketing to obtain new business.

Key skills and experience

- Candidates should be educated to Degree level in a Mechanical Engineering discipline, or relevant industry experience..
- Heavy Engineering experience required and ideally previous experience of working on large scale bespoke Mechanical Engineering projects.
- Good 3D Design experience, preferably using Solidworks software.
-Candidates should be able to produce stress analysis reports using IT software

Validation Engineer - Gillingham (888693)

Apply now

Validation Engineer
Gillingham, Kent, England

A world leader in the innovation, design and manufacture of Diesel Fuel Injection equipment are now looking for a Validation Engineer.

As the Validation Engineer the main duties will be drawn from the following:
Plan, organise and prepare prototype components and test facilities for validation tests.
Design special tests to validate all identified failure modes.
Analysis of components and assemblies on completion of tests.
Identification of root cause of failures, using 8D tool.
Collate test data, data analysis and summary reporting. Statistical Weibull analysis as required.
Maintain test database with running time and test status.
Interpretation of validation results.
Participate in team that maintains and tracks DFMEA.
Problem solving - apply a methodical and logical approach to problem solving based on fundamental engineering principals.
Development of validation test, measurement and inspection facilities.
Participate in team orientated activities – engage support from outside the team where necessary to ensure team objectives are met.
As the Validation Engineer you will hold a degree in mechanical engineering or a related discipline with significant experience in component engineering – design and development or validation, preferably within the automotive industry.

Must have excellent communication skills and able to communicate via reports, memos and presentations for which the successful candidate will need to be proficient in the use of MS Word, Excel and Powerpoint.

Emission Test Planning Engineer - Coventry - £25.70 - 25.70 per hour (888686)

Apply now

Emission Test Planning Engineer
Coventry, West Midlands, England
£25.70 - 25.70 per hour

The Emission Test team is part of Powertrain Test operations and Product Development. The team delivers development and certification test capability to Powertrain Calibration and Certification departments at Whitley and Gaydon. The team"s primary function is to deliver engineering development and certification testing to drive the design and control technology in order to meet required vehicle level targets. The role has been agreed to support the increase in workflow as a result of the success and growth in market reach and the growing product diversity. The team works extensively with a wide range of calibration and certification team members who place high demands in terms of quality and reliability on the test facility output.

The planning and project delivery role is essential in achieving full utilisation of internal capability and in minimising and managing outsource requirements. The job role is:
- To provide deliver and work to a process for managing long and medium term planning and to identify and deliver efficiency projects in order to define and improve internal facility capacity, define future requirements and to achieve 100% data quality at 100% utilisation.
The aim is to ensure that programme requirements can be met with minimum resource.

Skills Required:
An understanding of safe working practices in the associated work place environments. Project planning and management. Practical ability to deliver process maps and value stream maps. Practical ability to define and deliver commissioned projects to a specification. Technical/Theoretical understanding of Emission Test facility and requirements. Data Analysis skills, including ability to define and measure symptoms and analyse information. Ability to make use of data gathered to define solution and implement process improvement. Confidence to take ownership, prioritise and follow up on short term decisions. Very good PC skills, including advanced level of skills in Excel and Visual Basic.

Skills Preferred:
An understanding of internal combustion engines, transmission, driveline, emission systems and subsystems. An understanding of test quality data and analysis, preparation of calibration documentation in support of Certification activities. An understanding of the regulatory and legislative requirements of external agencies and organisations.

Experience Required:
Competency to apply safe working practices in the work environment. Project management and delivery. Creation and checking of planning synthetics. Delivery of high level plans, long and medium term. Demonstrate the agility and flexibility required to deliver within tight deadlines. Demonstrate perseverance and ability to complete tasks in difficult circumstances. Having worked in team environment and been a good team player, self-motivated and confident with good communication skills, verbal and written.

Education Required:
Ideally educated to Degree level in Systems, Mechanical, Electrical/Electronic field or related field. Alternatively HNC, HND, Foundation Degree in related area.

Education Preferred:
Six Sigma Black Belt or Green Belt certification. Matlab Minitab. Web based and client application development.

Additional Information:
May be required to support activity at Gaydon.

Applicants MUST have proof of immediate and valid eligibility to work full time in the UK.

Calibration Engineer - West Midlands (888672)

Apply now

Calibration Engineer
Telford, Cannock, West Bromwich,

We require a calibration engineer to work in the Test Equipment Department. The department produces and maintains special purpose test equipment used in the both development and production testing of our manufactured aircraft products.

This ranges from simply controlled electrical drives to complex, fully automatic, freestanding, servo hydraulic and servo electric production test machinery. All such machinery is conceived, designed, manufactured and commissioned on site and the vacancy exists amongst this team of engineers to calibrate and, in some cases, repair said equipment.

As part of the role you will undertake routine diagnosis and repair of day-to-day faults arising in equipment as follows:
Precision Measuring Transducer
Analogue electronics
Digital Electronics
Relay logic and PLC logic controller
Closed Loop servo-electric/servo-hydraulic control systems
Hydraulic systems
Rudimentary pneumatics
Electrical Drives and controls equipment
Proprietary equipment i.e. oscilloscopes, pen plotters, function generators, voltmeters

You will carry out routine annual calibration and checks of the above equipment which will involve the disassembly and re-assembly of machinery and accurately record / maintain calibration records for the purpose of customer auditing.

- Experience in all aspects of analogue electronics (particularly low frequency (20 KHz) linear, precision analogue circuit design
- Able to read circuit diagrams and fault find down to component level
- Experience in the calibration of transducers/sensors sensing distance, linear/rotational speed, pressure, torque, angular displacement, acceleration, etc.
- Rudimentary pneumatic knowledge would be an advantage.
- Good electronic repair/soldering skills
- Mechanical Fitting skills would be an advantage
- Computer literate e.g. experience of the more common Microsoft products

Principle Engineer - Cabin Trim - West Midlands (888621)

Apply now

Principle Engineer - Cabin Trim
Commutable from Coventry, Birmingham, Leicester, Warwick, Stratford, Northampton, Milton Keynes

Established in 2005 this Centre of Excellence for vehicle and powertrain development is located on a very attractive university campus employing more than 250 Engineering Specialists. The Centre offers talented Automotive Engineers and Managers the opportunity to work on a wide range of passenger car and commercial vehicle projects in a highly professional environment with excellent prospects for career development and progression. Over £85 million has been invested in the Centre since its foundation and it continues to grow and create new opportunities. Located close to the Warwickshire countryside the Centre is commutable from Coventry, Birmingham, Leicester, Warwick, Stratford, Northampton, Milton Keynes.
An opening now exists for an experienced Cabin Trim Principal Engineer to join the team. A very competitive salary, car allowance and benefits package is on offer.

The main activities and tasks for this job are to:
- Take responsibility for leading the development of Cabin Trim systems on a "Proof of Concept" vehicle
- Develop the design concept sheets to enable cost planning and concept development of Cabin Trim parts / systems to progress
- Work with nominated Cabin Trim prototype parts suppliers to ensure all parts are production representative and meet attribute targets
- Support cross-function reviews with Styling, Engineering and Suppliers to ensure all Cabin Trim targets are met and issues resolved
- Ensure all Cabin Trim parts are released in line with the agreed ETRS to meet part manufacture and build schedule
- Following Cabin Trim part / system manufacture lead the build of the Cabin Trim onto the proof of concept vehicle.

Candidate ideal core requirements are:
- A Degree or similar qualification
- Strong numeracy and literacy
- A minimum of 5 years automotive, defence or aerospace experience
- Good logical reasoning
- Able to demonstrate depth of experience in Interior Cabin Trim design and development
- Good interpersonal and negotiation skills
- Chartered or working toward it
- The ability to inspire the team to strive for improvements and high customer service
- Have evidence of achieving results through effective leadership of a team
- Able to translate business plan into individual objectives for staff
- Capable of managing a group of engineers and support Lead Engineers in the delivery of performance objectives
- Ability to overcome cultural barriers
- UK based with occasional overseas travel in 2012
- More regular travel may be required post 2012

Principal Engineer - Chassis Braking and Stability Controls Engineer - West Midlands (888629)

Apply now

Principal Engineer - Chassis Braking and Stability Controls Engineer
Commutable from Coventry, Birmingham, Leicester, Warwick, Stratford, Northampton, Milton Keynes

The main activities and tasks for this job are to:
- Support and lead as applicable the delivery of stability control system projects from concept to production
- Engage in all aspects of Stability Control System design, specification, test and development from planning and preparation integration on vehicle, execution of test and production implementation
- Support / lead as applicable the generation of system targets and the adoption or creation of applicable test, development and design standards, guidelines and procedures
- Support the generation and maintenance of system and component level DVP and FMEA
- Liaise with other engineering disciplines and deliver holistic resolutions to issues
- Support and liaise with suppliers and customers during project activities regardless of location
- Support the development of hardware in the loop (HIL) and virtual testing, simulation and analysis
- Support will be focussed upon passenger cars, with some commercial vehicle applications
Candidate ideal core requirements are:
- A Degree or similar qualification
- Strong numeracy and literacy
- A minimum of 5 years in the automotive industry
- Good logical reasoning
- Able to demonstrate depth of knowledge in the integration development and verification of vehicle stability control systems on passenger and or commercial vehicles
- Experience in vehicle test and development driving including limit handling is desirable
- Demonstrates general knowledge of Chassis systems and vehicle dynamics
- Demonstrates general knowledge of understanding of vehicle electronics particularly vehicle networks / CAN systems
- Experience in the use of vehicle dynamics simulation packages and HIL systems would be advantageous such as Carmaker, MATLAB or ADAMS
- Full driving licence
- Chartered or working toward this status

Project Manager - West Midlands (888648)

Apply now

Project Manager
Commutable from Coventry, Birmingham, Leicester, Warwick, Stratford, Northampton, Milton Keynes

Established in 2005 this Centre of Excellence for vehicle and powertrain development is located on a very attractive university campus employing more than 250 Engineering Specialists. The Centre offers talented Automotive Engineers and Managers the opportunity to work on a wide range of passenger car and commercial vehicle projects in a highly professional environment with excellent prospects for career development and progression. Over £85 million has been invested in the Centre since its foundation and it continues to grow and create new opportunities. Located close to the Warwickshire countryside the Centre is commutable from Coventry, Birmingham, Leicester, Warwick, Stratford, Northampton, Milton Keynes.

An opening now exists for an experienced Project Manager to join the team. A very competitive salary, car allowance and benefits package is on offer.

The main activities and tasks for this job are to:
- Manage and take ownership of general project activities
- Manage project meetings
- Manage project training requirements
- Identify issues that require action, take ownership and delivery responsibility, escalating as appropriate
- Support other programme management staff as required
- Manage pre-production build Bill of Material issues
- Manage relationship with customer STA organisation
- Manage relationship with customer purchasing department to resolve supplier issues
- Take responsibility for governance reviews
- Take ownership of programme launch activities as required
- International travel of up to 12 weeks per year
- Travel to multiple sites in the UK West Midlands area
Candidate ideal core requirements are:
- A Degree or similar qualification
- Strong numeracy and literacy
- A minimum of 5 years automotive, defence or aerospace experience
- Good logical reasoning
- Able to demonstrate depth of experience in a relative technical speciality
- Good interpersonal and negotiation skills
- Chartered or working toward it
- The ability to inspire the team to strive for improvements and high customer service
- Have evidence of achieving results through effective leadership of a team
- Able to translate business plan into individual objectives for staff
- Capable of managing a group of engineers and support Lead Engineers in the delivery of performance objectives
- Ability to overcome cultural barriers
- Knowledge of Jaguar Land Rover processes such as WERS, AIMS, GPDS, PCE
- Knowledge of APQP processes
- Hold a Full driving licence

Lead Structural Test Engineer - Isle of Wight - Up to £40K (888577)

Apply now

Lead Structural Test Engineer
Isle of Wight, England
Up to £40K

A leading aerospace player in the UK has an interesting new opportunity for a Lead Test Engineer. This role could also becalled Test Manager.It is based on the Isle of Wight.You will lead the company's test activities, whilst being a specialist in structural test. You will also support the expansion of the current Test Facilities over the next 5 years.

In addition to structural testing, this role will also perform Fire Testing and Environmental Testing. You will lead a small team and be involved in the selection and commissioning of new test rigs as well as the actual structurla testing.

You will be qualified to at least an HNC and have senior test experience including hydraulic servo control. A good knowledge of instrumentation and data acquistion would also be useful.Your experience does not have to be in aerospace. You can live on the attractive island or mainland.